Used other post press machines for sale (304)

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 003, Serial No.: 001 Dcjdpfx Aet Hrmtea Nog

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 6513/19, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dcedpfx Aaowu Sg Eo Nsg

Condition: excellent (used), machine/vehicle number: 4090, Width: 70 cm Thickness: about 1 cm Dcodpsh Ek Sasfx Aa Njg

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 02048020376, Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) Dedpfxsxmiqio Aa Njcg With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001)

Condition: excellent (used), Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dcodpfx Aewv Tuaea Neg

Condition: excellent (used), Format (cm): 72 Djdpovxqz Djfx Aa Necg Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 080453506, (only cutter) Dcodpfjv Ukgxex Aa Nog Power: A4 brochures (cut on 4 sides, creasing centrally) 9 sheets / min. (540 sheets / hour) Format: min: 210 mm (wide) x 210 mm (long) Max: 320 mm (wide) x 650 mm* (long) Gramatur (gr / m) : min 110/ max. 300

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: N3.610, Available: immediately Dsdpjwiffwefx Aa Nscg

Condition: excellent (used), machine/vehicle number: 85.1097, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dcedpfxeih R T Ne Aa Njg

Year of construction: 2002, condition: excellent (used), Max. sheet size: 720 x 320 mm Dcjdpfx Aaolhr Iys Neg Min. sheet size: 140 x 210 mm 9 creases per sheet Variable speed from 1200 – 1800 sph Suitable for paper stocks between 120 to 300 gsm

Condition: excellent (used), machine/vehicle number: PA-399, Format: A3 Djdpfx Ash Eh U Rea Nocg Paper format: ca 31x45cm

Year of construction: 2008, condition: excellent (used), machine/vehicle number: 081058130, (slitter / cutter / creaser) Power : A4 brochures (cut on 4 sides, creasing centrally) 9 sheets / min. (540 sheets / hour) Format: min: 210 mm (wide) x 210 mm (long) Max: 320 mm (wide) x 650 mm* (long) Gramatur (gr / m) : min 110/ max. 300 Equipment / Additional information: Creasing: 1 x creasing knife across the sheet running direction Max. Programmable 10 creases, programmable in steps of 0.1 mm Dcodpjffx Sksfx Aa Njg

Condition: excellent (used), 4X RESERVE KNIVES SET FOR THREE-CUTTER M.MARTINI E6 Dcjdpfx Ajh Eilgsa Njg

Year of construction: 1995, condition: excellent (used), machine/vehicle number: 458/08 (C.2.144.1301/02), Max. Format: B1 Voltage : 100-240V // 300-330VA // 50/60Hz Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dedpfxofh Dp Ts Aa Njcg

Condition: excellent (used), P/N: 190.101 // Fabrik No.: 616 Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dcsdpfx Asgnlb Aea Nog

Year of construction: 1993, condition: excellent (used), machine/vehicle number: 32781, Size: 300 x 560 mm Speed: 44.000 c/h Dcodpfjhncafox Aa Neg

Condition: excellent (used), machine/vehicle number: 91-1101, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dcodpfx Aodnr E Aja Njg

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Dcedpoh Eibaofx Aa Nsg Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Year of construction: 1996, condition: excellent (used), machine/vehicle number: 121, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dcodoh Eib Ejpfx Aa Nog

Condition: excellent (used), Format (cm): 55 Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dcedon Atd Uepfx Aa Nog

Condition: used, Year of construction: 1991, Format: 760 x 440 mm Equipment: Spindles: 4 Dcodoy Iz R Hepfx Aa Nsg Drilling diameter: 3 ??? 10 mm Drilling depth: up to approx. 70 mm Spindle spacing: adjustable Spindle shaft: ?? 11 mm Hole spacing: min. approx. 3 mm / max. approx. 800 mm Table size: approx. 760 x 440 mm Connection: 380 V Power: approx. 1.5 kW Weight: approx. 90 kg

Condition: used, Year of construction: 1990, This Polar L-1000-G-3BF is a robust piece of equipment designed for handling heavy loads. Currently dismantled and located in Germany. With a maximum load capacity of 1000 kg and equipped with a pallet lifter, this model is well-suited for various industrial applications. Format: 100x140 cm Equipment: Dcjdpfx Aasvfx Tzj Nog Max. Load capacity: 1000 kg

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Djdpovphziefx Aa Njcg Equipment: 40 nozzles for consistent adhesive application

Condition: used, The Wahli-Stream Feeder TM 530 is a reliable feeder designed for efficient paper handling. Manufactured by Wahli, this model is located in Germany, with pricing available upon request. The machine supports an A2 format and is designed to enhance productivity in printing and finishing operations. Format: 360 420 mm Equipment: AUTOMATIC ENVELOPE FEEDER (with vacuum suction) SUITABLE FOR PRESSES WITH STREAM / SINGLE SHEET FEEDERS ADJUSTABLE VACUUM, HEIGHT & SPEEDDELIVERY CONVEYOR Dedsvphzpopfx Aa Nscg MIN ENVELOPE SIZE: 7.6 x 12.7 CM MAX ENVELOPE SIZE: 36 x 42 CM

Condition: used, Year of construction: 2000, Robopac ROBOTAPE 50 M is a band wrapping machine manufactured by Robopac in 2000, with a format of 500 x 500 mm. Currently stored in Germany, it can handle a maximum carton weight of 50 kg and is in good condition without any damages. The delivery terms are FCA. Format: 500 x 500 mm Dcodpjwvut Djfx Aa Njg Equipment: Tape winding machine Max. Carton weight kg 50 Good condition without any damage