Used punches for sale (65)

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Fpedpsyuuzdjfx Adrjk Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools - hardened pressure sheet Fpodjy Rumyepfx Adrjk

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate Fpjdpfey Rummox Adrsk

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening Fodpfx Asy Rumasdrepk – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication Fpedpfxsy Rulvo Adrek – additional safety guards – operation tools – hardened pressure plate

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm Fpsdpfx Aey Rulcjdrok MAX. CUTTING PRESSURE: 550 tons

Year of construction: 2006, condition: used, We offer this used Unigraphica Unicut 740 and S-74-3 Unigraphica Unicut 740 cutting machine, manufactured in 2006. Type: S-74-3 Version: S-74-3 Number: 006 Year of manufacture: 2007 Fuse: 16 A Rated current: 5.0 A Power consumption: 3.0 kW Fsdsy N Rcbspfx Adrspk Power supply: 3 x 400/230 V 50/60 Hz Formats: 7"-27" Format divisions: 1/6" and 1/8" Paper weight: 60-250 g/m2 Maximum paper width: 740 mm. GUK K72/4 KTL-F4 folding machine Year of manufacture: 1996. Equipment: 4 standard cassettes (pockets), 1 blanking cassette, 1 electric cassette for performing special folds, cassette stand. The machine is operational but incomplete. Missing the controller and optical sensor for triggering the electric cassette, missing the reciprocating knife section. Modified sheet feed control. The machine can be switched on and tested. If you have any questions or require additional information, please send us a message.

Condition: good (used), functionality: fully functional, machine/vehicle number: 552410, Year of construction: 1974, Manufacturer: Bobst, Switzerland Model: Autoplatine SP 1420 E – 600 T Type: Die Cutting Machine / Autoplatine Year of manufacture: 1974 Machine No.: 552410 Technical specifications: Fpedpfx Ajw Rb Ezjdrek - Max. sheet size: 1420 x 1020 mm - Min. sheet size: 700 x 500 mm - Speed: up to 4,500 sheets/hour - Power supply: 380 V, 50 Hz Features: - Robust construction for carton and corrugated board - Automatic platen die cutting - Pile feeder and delivery - Mechanical control with operator panel - Proven Swiss quality

Condition: good (used), functionality: fully functional, machine/vehicle number: 057400108, Manufacturer: Bobst, Switzerland Model: SP 142 Machine Category: Die Cutting Machine Machine Type: Autoplaten Year of Manufacture: --- (not specified) Machine Number: 057400108 Technical Specifications: - Max. Sheet Size: 1420 x 1020 mm - Min. Sheet Size: 700 x 500 mm - Speed: up to 4,500 sheets/hour (depending on job) - Power Supply: 380 V, 50 Hz Features: - Robust Swiss design - Mechanical control with side operator console - Pile feeder and delivery for continuous operation Fpodpfxjw Rb Ebs Adrek - Suitable for cartonboard and corrugated board - Proven model for packaging production

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 858799A, Manufacturer: Ruiyang Printing Machinery Co., Ltd., China Model: MH-1650 Machine Category: Die Cutting & Creasing Machine Machine Type: Automatic Large Format Die Cutter Year of Manufacture: 2014 Fedpfx Asw Rb Ipsdrepk Serial Number: 858799A Technical Specifications: - Max. Sheet Size: 1650 x 1210 mm - Min. Sheet Size: 650 x 550 mm - Max. Die Cutting Size: 1620 x 1190 mm - Speed: up to 3,200 sheets/hour - Power Supply: 380 V, 50 Hz, 3 phases Features: - Automatic feeder with suction head - Large format pile delivery - Heavy-duty design for carton and corrugated board - Control panel with management and safety functions - Suitable for large format packaging production

Condition: ready for operation (used), Available directly from our warehouse in Son; Fpsdpfx Aexz Niujdrsk heavy stamping die with electric coupling, electrical system completely renewed around 2019, original year of manufacture 1973; mechanically completely overhauled in 2015, moving die resurfaced, die and gear pins replaced with new pins with significantly higher mechanical strength than the originals, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this material is extremely wear-resistant with the addition of Pb (lead) for improved performance and good emergency running properties (i.e., no lubrication required), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays for each channel, motorized clamping of the stamping die. Safety bars have been extended and made more robust compared to the original design, 350 tons of pressure.

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Fsdpfxox Ndu Ds Adrspk Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Punch adjustment distance 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min Motor power 15 kW Fpodpodzqmzofx Adrek Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - punch equalizing cylinder - automatic central lubrication system VOGEL - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for die-cutting cardboard sheets. Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks.

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Fpsdpey Nnakofx Adrok

Condition: ready for operation (used), functionality: fully functional, Rotary die cutter in very good condition, hardly used. Fpsdpsxz Tn Uefx Adrok Contact details of a highly reputable die manufacturer can also be provided.

Condition: used, Year of construction: 1959, The Heidelberg OHT, manufactured in 1959, is a machine with an A4 format. It is currently in production and located in Germany. The delivery terms are FCA. Format: A4 Equipment: Fsdpfxovfxwtj Adrspk Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph

Condition: used, Year of construction: 1973, The Heidelberg OHT, manufactured by Heidelberg in 1973, is a robust machine designed for printing and die-cutting operations. With a format of A4, it is currently in storage in Germany. Identified by the machine number T 184634 H, this press has a punching force of 40 tons and can handle a minimum format of 40 x 70 mm. It operates at a speed ranging from a minimum of 2,200 revolutions per minute to a maximum of 5,500 revolutions per hour. The machine includes a skeleton chase of 260 x 350 mm and a standard chase of 260 x 340 mm, with a maximum format of 260 x 380 mm. It comes complete with accessories and a closing frame, and features a letterpress platen and a die-cutting platen. The delivery condition is FCA. Format: A4 Speed: 5500 Power: 380 V 1,25 KW Net Weight: 1100 KG Measurements: L1,68 x B1,24 x H1,85m Fjdpfx Aovfxu Esdrspk Equipment: Skeleton chase: 260 x 350mm Speed min.: 2.200 sph - max. 5.500 sph Size max. 260 x 380 mm Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Complete with tools and accessories include frame Standard chase: 260 x 340mm Machines No T 184634 H

Condition: like new (used), Year of construction: 2022, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 90L1201, Polar Mohr DC-M Punching Machine – As-new condition machine in top shape! Sales price: €69,000 (plus VAT) Ex works: 2325 Himberg near Vienna, Austria Fpodpswuq Afsfx Adrek Condition: Hardly used – almost as-new Availability: Immediately available Description: For sale is a Polar Mohr DC-M punching machine in excellent condition – barely used and virtually as-new. This machine is ideal for precise punching of labels, tags, and packaging components, excelling in reliability and efficiency in daily production operations. The DC-M is renowned for its user-friendly operation, compact design, and seamless integration into existing production workflows – a true quality product "Made in Germany". Technical highlights: • Precise punching quality with high productivity • Ideal for label production and small formats • Robust construction for long-term use • Compact footprint – also suited to smaller production areas • Operator-friendly interface Viewing by appointment possible. Sale ex works (EXW) 2325 Himberg near Vienna, transport and loading available on request. 👉 Inquire now and secure an almost new Polar Mohr DC-M at an attractive price!

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, punching force: 1,000 t, operating speed: 93 mm/s, stroke length: 55 mm, table length: 1,100 mm, table width: 800 mm, machine/vehicle number: 100597, TECHNICAL DETAILS Press force: 10,000 kN Fjdsy Ampdjpfx Adrspk Table surface (W x D): 1,100 x 800 mm Stroke range: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Puzzle thickness: up to 3 mm Format width (max.): 1,100 mm Punching speeds Upwards: 47.8 mm/s Downwards: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil fill: approx. 1,550 kg Automatic punching table Type: 355 Table top size (W x D x thickness): 1,000 x 700 x 10 mm Hardness: 62 HRC Surface finish: 7 MACHINE DETAILS Electrics Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Incoming line protection: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power requirement: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Puzzle disassembler dimensions (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of puzzle disassembler: approx. 1.8 t Noise level: < 70 dB(A)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 15 h, machine/vehicle number: MP.DBDO-00198, Size 75 x 106 cm, non-stop function in feeder and delivery, integrated fine adjustment of the cutting plate, motorized die-cutting pressure adjustment, simple operating concept. The basic model is already equipped with all functions and equipment required to start production. Short makeready times, high flexibility thanks to an extended range of materials, accommodates smaller die-cutting tools. Machine number: MP.DBDO-00198, Impressions: 15 million. Fjdpfx Asyhn Uqodrjpk

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Fedsxc Uv Aspfx Adropk

Condition: excellent (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 32250, Size 64 x 90 cm, for diecutting only, excellent condition Fpjdow Inz Dopfx Adrek Machine no.: SBDS32250

Year of construction: 1994, condition: ready for operation (used), Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation. Fpedpoix Ahbsfx Adrek

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Fsdpfx Adjvfx Ulsrspk Equipment: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: used, Year of construction: 1985, used die-cutting press, year of manufacture 1985, size 82x112, equipped with pneumatic clutch Fpodpfx Aeyx Hpvedrsk