Section steel shears over 80t punching power for sale
Identified location: Ashburn (US) (Edit)
Max. Punching capacity: 800 kN Max. Shear capacity: 1100 kN Punch 27mm holes in 20mm steel Shears on the flat steel shears to 500 mm up to a material thickness of 18 mm steel Further technical data on request With an assortment of punches and dies as required
Bqjwt3jwra
Serial No. 386190
Punching 26mm diameter x 20mm
Throat depth 625mm
Angle cutting 150mm x 150mm x 12mm @ 90 degrees, 70mm x 70mm x 10mm @ 45 degreees
Bpz9ql2fu2
Shearing 300mm x 20mm or 450mm x 15mm
Notching 90mm deep x 42mm wide x 10mm thick
Rounds 45mm
Square bar 45mm
Input 415/3/50hz
Actuated via Wander type footswitch
Equipment Quantity of punch tooling
Length 2250mm
Width 800mm
Height 1700mm
Nett weight actual. 2,670 Kgs. / 2.65 Tons.
working lenght:12.000 mm
pressing power:180 t
Punching capacity:1000 kN
cutting capacity:Flach - max. 22 mm
cutting capacity:Winkel - max. 150 x 150 x 15 mm
punch diameter:32 mm
number of punch tools:3 Stk. / pcs.
connected load frequency:3 x 400 V
control:VACON 110
accessories::Zufuhrwagen
Ewx2awkae
accessories::Schleppketten-Quertransport
Voortman V550 punching and shearing machine suitable for shearing and punching flat steel and angle profiles
round bar steel 50 mm
square edge steel 40 x 40 mm
L-beam 140 x 13 mm
Punch power 900 kN
hole punching press: throat 510 mm
hole punching press: max. length of stroke 29 mm
hole punching press: capacity (dia. x thick.) 31 x 20 mm
notching: l + T material 80 x 14 mm
no. of strokes 40 / 45 Hub/min
total power requirement 4 kW
weight of the machine ca. 3,7 t
Beoibo2p7j
dimensions 2,1 x 0,7 x 2,12 m
Accessories: various punches and dies
hole punhing press: pressure 100 t
output 40 in 22 mm
L-beam 160 x 16,0 mm
Bvectvby
square edge steel 50 mm
round bar steel 50 mm
flat steel 600 x 15,0 mm
throat 610 mm
engine output 8,5 kW
weight of the machine ca. 3150 kg
pressure 300 t
square measurement . mm
Bkobmdm20y
diameter . mm
total power requirement 15 kW
weight of the machine ca. t
dimensions of the machine ca. m
Max. Punching force: 1100 kN throat: 510 mm Large support table with material stops on the punching side Electrical contact length stop for shear side Hydraulic hold-down for profile and flat steel shears With a wide range of tools
3pirbcdw
![GEKA [ 0000N ] C2PL 65](https://cdn.machineseeker.com/data/listing/img_650x487/28/4064728.1601417586__.jpg)
![GEKA [ 0000N ] C2PL 65](https://cdn.machineseeker.com/data/listing/img_650x487/28/4064728-2.1601417587__.jpg)
![GEKA [ 0000N ] C2PL 65](https://cdn.machineseeker.com/data/listing/img_650x487/28/4064728-3.1601417587__.jpg)
![GEKA [ 0000N ] C2PL 65](https://cdn.machineseeker.com/data/listing/img_650x487/28/4064728-4.1601417587__.jpg)
![GEKA [ 0000N ] C2PL 65](https://cdn.machineseeker.com/data/listing/img_650x487/28/4064728-5.1601417587__.jpg)
maximum angle 65 x 65 x 7 mm
maximum diameter 25 / 5 or 18/7 mm
Delivery time 2-3 months after placing the order
Price on request:: minimum angle: 40 x 40 x 4 mm
Be89xo2aoy
Maximum angle: 65 x 65 x 7 mm
Number of punches: 2 (1 per leg)
Maximum Stanzdm. / strength: 25 / 5 / 18/7 mm
Punching power: 170 kN
Cutting force: 350 kN
Hydraulic unit: Motor: 5 kW
Maximum pressure: 265 bar
Oil: 70 lt
Automatic line for punching and cutting of WinkeleisenBestehend from: intake/discharge roller conveyor runni...
cutting pressure: 80 / 150punching performance (diameter x thickness): 40 / 14throat depth: 510flat steel shear: 300 x 15notching (strenght x width x depth): 12messurements (LxWxH): 2025 x 1780x 2700weight approx.: 1195total power requirements: 5round steel: 40 x 14square steel bar: 40 x 14
Ss88ro
round bar steel 50 mm
square edge steel 16 mm
L-beam 180 x 18 mm
hole punhing press: pressure 110 t
stroke adjustable 15 - 70 mm
punching throat 530 mm
perforates: 30 Durchm in 25 mm
flat steel shear 600 x 15 / 400 x 25 mm
tipping mechanism 16 mm
turret head 6 Aufnahmen
Drive 15 kW
weight of the machine ca. 5 t
dimensions of the machine ca. 2,05 x 1 x 2,1 m
D0qozpc03
Condition: ready for operation
Condition: very good
hardened and grinded bedways
CE signed
Condition: very good
Elect...
Technical data:
Eneccvb
Hole punch:
Punching pressure: 130 to
max. punching capacity: ∅ 40 x 26 mm
stroke: 36 mm
throat: 750 mm
Table size: 750 x 630 mm
Notching:
Capacity: 100 x 70 x 16 mm
Table size: 580 x 435 mm
Plate shears:
Capacity: 160 x 24 mm - 300 x 20 mm
Blade length: 350 mm
Steel bar shears:
Capacity: 3000 mm2
Round steel: 65 mm
Square steel: 55 mm
Sectional steel shear:
Capacity: 6900 mm2
Angle steel: 180 x 20 mm
T-steel: 180 x 20 mm
Weight: approx. 8.5 tons
accessories:
a lot of too...
pressure . t
square measurement 55 mm
diameter 63 mm
flat material 170x20 mm
total power requirement kW
Bkocx7jw2l
weight of the machine ca. t
dimensions of the machine ca. m
Max. Punching force: 100 t Max. Projection: 340 mm with set of punches and dies
Bolvj9axpn
X 6,000 mm
Y axis, mm
Delivery time approx. 2 months from order placement
Flat iron dimensions Max: HYD 80: 400 x 15 mm / 300 x 20 mm
HYD 110: 600 x 15 mm / 400 x 20 mm
Min. flat iron width: 40 mm
Flat iron length: 6,000 mm
Flat iron weight: 600 kg
Min. rest section length: 180 mm
Maximum feed speed: 0-16 m / min
Positioning accuracy: 0.2 mm / m
Repeat accuracy: 0.1 mm
Be89uppigo
The ALRS 600 is a CNC-controlled flat iron intake and section system that can be mounted on GEKA Hydracrop 80 and 110...
cutting pressure: 110 / 180punching performance (diameter x thickness): 40 / 20throat depth: 610notching (strenght x width x depth): 13messurements (LxWxH): 2560x2550x1790weight approx.: 1260total power requirements: 5round steel: 40 x 20square steel bar: 40 x 20
Bdf27d7avt
The data can be found in the pictures.
Bmeylovhwc
Div. stamps and dies.
Hydr. 5-fold combined flat profile and bar shears + hole punching machine
Bqfnhxzjyb
Technical data:
- Flat steel shear cuts up to 450 x 15 mm
- profile steel shears
- cuts - L-steel at 90° up to 130 x 13 mm
- Steel bar shears
- cuts round steel up to 45 mm
- square steel up to 45 mm
- notching device - with square notcher 90 x 90 x 12 mm
- Hole punching machine - punching force 800 KN
- with stop table
- throat 500 mm
- punching in steel up to 40 mm Ø in 14 mm
- or 24 mm Ø...
Maximum punching force: 1100 kN Maximum shear force: 1700 kN Punching throat: 510 mm Hole 31 in 25 mm flat steel: 500 x 22 mm Hydraulic hold-down for the flat steel knife Square notcher Weight: approx. 5000 kg
3plg2ux9
X axis 3000 mm
Y axis, mm
Delivery time approx. 2 months from order placement
X-axis: 3000 mm
Max moved: 24 m / min
Positioning accuracy: +/-0.25 mm
Repeatability: +/-0,15 mm
S038pnpa
Maximum workpiece weight: 250 kg
The PAX range ensures the automatic positioning of the Materialsentlang of the X-axis and sequential, multiple punching of profiles.
cutting pressure: 80 / 150punching performance (diameter x thickness): 40 / 14throat depth: 300flat steel shear: 300 x 15notching (strenght x width x depth): 12messurements (LxWxH): 2025 x 1780x 2700weight approx.: 1195total power requirements: 5round steel: 40 x 14square steel bar: 40 x 14
Ekdgofp
Nr. 3418:
1 gebr. 5-fach kombinierte Profilstahlschere mit Flachstahlschere,
Fabr. PEDDINGHAUS
Typ 210 Super 16
Bauj. ca. 79,
5,5 PS
Arb.-Ber.: 150 x 16 (19) mm,
Kt7lv
Zubehoer:
Ausklinker, Stanzeinrichtung
Messer fuer Winkeleisen, Rund- und Vierkanteisen
Druckleistung 80 to
Rundstahl 50 mm
Vierkantstahl 45 mm
Winkelstahl 150 x 14 mm
lochen bis 90 mm Durchmesser
Platzbedarf 2,30 x 1,0 x 2,1 m;
Gewicht 3500 kg
Shear
Byao8ax8
Mubea scissors type KBL 1100, BJ. 1964, with length stop up to 3 m, with single-sided cutting device and central profile knives. The gap is still under power.
Baqyof0mlf
![GEKA [ 0000N ] Semipaxy 1000x400 mm B&R 7](https://cdn.machineseeker.com/data/listing/img_650x487/35/4064735.1601417595__.jpg)
![GEKA [ 0000N ] Semipaxy 1000x400 mm B&R 7](https://cdn.machineseeker.com/data/listing/img_650x487/35/4064735-2.1601417595__.jpg)
![GEKA [ 0000N ] Semipaxy 1000x400 mm B&R 7](https://cdn.machineseeker.com/data/listing/img_650x487/35/4064735-3.1601417595__.jpg)
![GEKA [ 0000N ] Semipaxy 1000x400 mm B&R 7](https://cdn.machineseeker.com/data/listing/img_650x487/35/4064735-4.1601417595__.jpg)
![GEKA [ 0000N ] Semipaxy 1000x400 mm B&R 7](https://cdn.machineseeker.com/data/listing/img_650x487/35/4064735-5.1601417596__.jpg)
![GEKA [ 0000N ] Semipaxy 1000x400 mm B&R 7](https://cdn.machineseeker.com/data/listing/img_650x487/35/4064735-6.1601417596__.jpg)
X axis 1000 mm
Y-axis 400 mm
Delivery time approx. 2 months from order placement
S03u8h09
X-axis: 1000 mm
Y-axis: 400 mm
Positioning speed: 0-12 m / min
Positioning accuracy: 0.2 mm
Repeat accuracy: 0.1 mm
Weight: 300 kg
The Semipaxy table is a CNC positioning unit which die-cutting machine can be ordered with each GEKA, which has a radius of at least 500 mm.
The installation consists of:
cutting pressure: 165 / 300punching performance (diameter x thickness): 40 / 30throat depth: 610notching (strenght x width x depth): 16messurements (LxWxH): 3230x2550x2280weight approx.: 3100total power requirements: 5round steel: 40 x 30square steel bar: 40 x 30
H3yhe3dbs
Stationen: 5
Stanzkraft: 165/300 to
Ausladung 610 mm
Hydraulic hole punch Fabr. PEDDINGHAUS type hydraulic 1000
Bdw2hzr3ex
Masch.# 4206870287003 built in 1987
Technical data:
Pressure capacity 1000 KN
Infinitely adjustable hub 10-100 mm
14-45 strokes / min
Projection 510 mm
punches for example up to 31 mm Ø in steel 25 mm
with Sonderstanzsattel for example up to 58 mm Ø in steel 13 mm
Height 469,5 mm
Table width 420 mm
Working height 1130 mm
Oil filling 300 mm
Weight approx. 3.4 t
8.8 kW
used, in good condition
TECHNICAL FEATURES
• Punching capacity: 1100KN / 110Tn
• Motor: 9KW
• Throat depth: 510mm (SD version)
• Punching capacity: Ø40x30mm or Ø34x34mm
• Strokes per minute (20mm travel): 28
• Flats cutting station up to: 600x15mm or 400x20mm
• Angle cutting at 90⁰: 152x152x13mm
• Angle cutting at 45⁰: 70x70x7mm
• Round & square bar cutting: Ø y ¨ 50mm
Bcrdfdxdlc
• Notching station: 90x52mm (thickness13mm)
new Sunrise profiling machine
Punching force: 80Ton
Punching power: Diameter Punching power: 26 x 22
Projection S: 310
projection SD: 510
Bgri8tklkn
U-steel Height: 180
Max. Stroke length:100
Number of strokes/min (20 mm stroke): 29
Working height to die: 1050
Technical data:
- Flat steel shears
- Flat steel - 500 x 20 mm
- or: 350 x 23 mm
- Sectional Steel Shears
- L- and T-iron at 90° 150 x 18 mm
- at 45° 100 x 12 mm
- square steel / round steel 45 / 50 mm
- Notcher
- with square notcher for sheets up to 16 mm
- Jack width / depth 72 / 85 mm
- with triangular notcher for sheets (option) up to 16 mm
- Latch depth 70 mm
- Hole punch
- Punching force approx. 100 t
- Overhang 510 mm
- Stroke approx. 10 to 29 mm
Bni2lnb3nt
- holes in ...
X axis 1000 mm
Y-axis 400 mm
Delivery time approx. 2 months from order placement
X-axis: 1000 mm
Y-axis: 400 mm
Positioning speed: 0-12 m / min
Positioning accuracy: 0.2 mm
Repeat accuracy: 0.1 mm
Weight: 300 kg
The Semipaxy table is a CNC positioning unit which die-cutting machine can be ordered with each GEKA, which has a radius of at least 500 mm.
The installation consists of:
Ptup9q
From authorities
Manufacturer Peddinghaus
Model Peddimaster 110/170
year of construction 1989
Machine no. 4424256789003
Technical data:
max. shearing force 1700 kN
flat steel shears cuts max. 500x22mm or 250x30mm
cuts angle steel 150x18mm hydraulic hold-down for angle steel shears
Square notchers sheet metal up to 16mm
Bgtegkrwfg
hole punch max. 31mm diameter in t=25mm or 90mm in t=9,5mm
Throat 510mm
Accessories:
electr. contact length stop 2000mm
height adjustable roller conveyor 3000mm
various...
PEDDINGAUS Type: 210/20
Wo70yobl
EXCELLENT CONDITION
Hydr. Flat profile and Rod steel scissors with notching device and hole punch
Technical data:
-Flat steel scissors - knife length 600 mm
Eum277a3s
-for flat stock 600 x 15 mm
- or 400 x 20 mm
-Shear - l steel at 90 ° 160 x 13 mm
-at 45 ° 70 x 7 mm
-T steel at 90 70 mm
-Rod shear - steel 50 mm
-Square steel 50 mm
-Notching device - for material up to 13 mm
-Right lug, - triangle notching up to 60 x 90 mm
-Hole punch - punching force approx. 1000 KN
-Infinitely variable stroke 0-70 mm
-punches ...
X axis 3000 mm
Y axis, mm
Bnw2idr
Delivery time approx. 2 months from order placement
X-axis: 3000 mm
Max moved: 24 m / min
Positioning accuracy: +/-0.25 mm
Repeatability: +/-0,15 mm
Maximum workpiece weight: 250 kg
The PAX range ensures the automatic positioning of the Materialsentlang of the X-axis and sequential, multiple punching of profiles.
Type: 229R200
Winkelstahl: 150x12 / 200x100x12 mm
T-Stahl: 120 mm
U-Stahl-Flansch: 200 mm
Flachstahl: 140x20 / 200x14 mm
I-Normalprofil bis: 200 mm
Gesamtleistungsbedarf: 7,5 kW
Maschinengewicht: ca. 4,1 t
Bz8vxli
Raumbedarf: ca. 1,2 x 1,8 x 2,2 m
Profilstahlschere mit
- Messertaegertrommel fuer 4 Messerpaare
- schnellem Messerwechsel
This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Sheet metal working
Dealer for Sheet metal working
