Used tool grinders for sale (185)

Condition: good (used), Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine -Angle adjustment -grinding device -Disc: Ø 190 mm -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 700/700/H1400 mm -Weight: 275 kg Iaedpfob A Nihox Abcep

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm diameter 5-50 mm current capacity 70 kVA weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Workpiece spindle unit: Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: 8 kW Balancing: Electronic Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Iedoyan R Nepfx Abcoap Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Condition: used, Year of construction: 2021, operating hours: 13,392 h, functionality: fully functional, machine/vehicle number: 810061, Anca CPX with Roboloader, 7/24h capacity. - AR300 Roboloader - With tailstock - With white bar magazine - Collet standard available from 3–20 Iajdpjwv T T Nofx Abcjp Bdedbowv T T Ns E R Hvxsd - 2 roughing wheels and 1 finishing wheel (used) - Marpos measuring system. (The feet are damaged due to overlapping. They need to be replaced. The software and all other components are functional.)

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 7063234, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 550 kg Customs tariff number: 8460.2930 Dimensions: 150/60/120 cm TECHNICAL SPECIFICATIONS Minimum diameter: 0.1 mm Maximum diameter: 12 mm Maximum plunge grinding length: 50 mm Work wheel diameter: 150 mm Work wheel length: 50 mm Regulating wheel diameter: 100 mm Grinding motor: 1.5 kW Work wheel speed: 4,500 rpm Regulating motor: 0.35 kW Regulating wheel speed (variable): 20–150 rpm For diamond dressing: 455 rpm Technical specifications are provided without obligation and subject to errors or omissions. Iedpsw T Tqnefx Abceap

Condition: good (used), Year of construction: 1990, feed length X-axis: 800 mm, For sale: Jungner US 2305 tool grinder Machine is in working condition as shown in the photos. Workshop liquidation: many machines, accessories, cutting tools, holders, vises. Please contact by phone; I do not respond to OLX messages. Net prices, reasonable negotiation possible. 1. Bench drill 2. Jungner grinder 3. SPC 20 grinder 4. Marking plate (table) 800x500 5. Maho 800 Iedpfsxbm Ubex Abcsap 6. 2D dividing head Ø 300 7. 3D dividing head Ø 300 8. Tesa 700 height gauge 9. Charmilles 200 die sinking EDM machine 10. Charmilles Drill 11 EDM drilling machine 11. Steel bandsaw

Condition: used, Year of construction: 2003, CNC Tool Grinding Machine Schneeberger NORMA CFG Year of manufacture: 2003 Center height: 210 mm Table length: 950 mm Table width: 310 mm Travel X-axis: 380 mm Travel Y-axis: 280 mm Travel Z-axis: 280 mm Grinding wheel diameter: 50–200 mm A-axis grinding head rotation: 360° C-axis tool rotation: 340° C-axis spindle resolution: 0.001° Tool holder: HSK 50 Grinding spindle speed, stepless: 0–9000 rpm Hydraulic unit: 6 bar Connection: 3×400 V / 50 Hz Spindle power: 7.5 kW Total power requirement: 33 kVA Machine weight: approx. 5,500 kg Iodpfjxz R T Ujx Abcoap Machine dimensions Length: 1,930 mm Width: 1,590 mm Height: 2,250 mm Control system: GE Fanuc Series 16-M Accessories: various grinding wheel mounts and tool holders Max. operating current: 3×40 A No guarantee is given for the accuracy, completeness, or timeliness of the information.

Condition: ready for operation (used), Year of construction: 1978, Spline shaft grinding machine Fritz Werner type SKR 30 Y.o.m.: 1978 center height: 200 mm max. grinding diameter: 150 mm min. grinding diameter: 10 mm Iaedpfx Absv Sm Nqecjp max. length between centers: 3000 mm max. grinding length: 2950 mm min./max. diameter of the grinding wheel: 40 / 250 mm main drive power: 8.5 kW With accessories. Movie with machine underpower available

Year of construction: 1984, condition: used, gr. grinding Ø: 40 mm small grinding Ø: 5 mm Ijdpfx Ascq Rv Usbcoap weight: 0,9 t 2 grinding wheels with flange 8 collets 1 coolant tank mechanical feed with fixed stop The cardan shaft for the workpiece drive is worn out

Condition: used, SURFACE GRINDER MAGNETIC Down table size: 1100x400mm Iedpfj Dv Nujx Abcoap

Condition: used, SURFACE GRIDER MACHINE STANKOIMPORT 700x250mm Iasdpfxsikza To Abcsp

Condition: refurbished (used), SURFACE GRINDER 3000x300mm ALPA RVA 3000 Power: 15kw Iasdsdwn Tpspfx Abcep

Condition: used, Technical characteristics: LENGTH: 3,600 mms Ijds Dvllepfx Abcjap

Condition: used, EWAG WS 11 SP is a tool and cutter grinder designed for precision, high accuracy and reliability. Working capacities: X/Y/Z axes 100 mm, grinding-wheel diameter 75 mm, workpiece spindle speed 100-1300 t/min, vertical adjustment of grinding head 100 mm, slewing range horizontal 165°, grinding spindle speeds 2500-7100 t/min, collet attachment 20 W. Technical specifications: voltage 50 Hz 3x380 V, total power required 2 kVA, machine weight about 400 kg, dimensions L850×W850×H1580 mm. Key equipment: flange for wheel, dust extraction, set of grinding wheels, lamp, helical grinding device W20, feed unit (Z-axis) 4 E-M, grinding stroke 3 J. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical Iasdpexyi I Isfx Abcjp

Condition: reconditioned (used), EWAG WS 11 is a Tool and cutter grinder designed for precision, high accuracy and reliability. X/Y/Z travel 100 mm; grinding-wheel Ø75 mm; A axis -135°/+30°; workspindle 100–1300 rpm; vertical head travel 100 mm; collet nose 20 W. Wheel spindle 2500–7100 rpm; 380 V 60 Hz; 0.4 CV; ~350 kg; 1000×1000×1800 mm. Accessories: set of collets, flanges, wheel arbors, lamp, Z feed unit. Achieves tight tolerances; suited to automotive, aerospace, watchmaking, medical sectors. Iaodpfx Absxx U Epscop

Condition: used, ROLLOMATIC CNC 600 X is a Tool and cutter grinder CNC engineered for precision, high accuracy and reliability. Capacities: max grinding length 150 mm, diameter 0.1–12.7 mm, max wheel 150 mm; spindle taper W20; W/U axes 600 mm; travel cross 230, longitudinal 180, vertical 150 mm; A -15/+90°, B -130/+45°. Specs: spindle 2,000–7,200 rpm (stepless), spindle motor 14.5 kW, 3x380 V 50 Hz; dimensions 2060×2032×1880 mm; weight ≈3500 kg. Achieves tight tolerances; applications: automotive, watchmaking, tooling, aerospace, medical. Iajdpfxjxx U Ane Abcjp

Condition: excellent (used), Year of construction: 2004, table length 175 mm table width 110 mm grinding wheel diameter 500 mm total power requirement 1 kW weight of the machine ca. 1,5 t Iaodpsxvdr Tjfx Abcop

Condition: used, used Michael Deckel S11 - fully functional Iedpfex Hyn Isx Abcjap

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Technical Data: >> Year of manufacture: 2002 >> Serial No.: 2197 Clamping range: >> Clamping surface of tool slide 500 x 180 mm >> Max. tool diameter between centers 130 mm >> Max. tool length between centers 270 mm >> T-slots machine stand 12 mm Iodpjwrnf Eofx Abcsap Movement range: >> Working travel Grinding stroke 190 mm Grinding stroke during thread grinding 190 mm Transversal adjustment tool slide 100 mm Vertical adjustment grinding head 325 mm Longitudinal adjustment grinding spindle 5 mm >> Coarse adjustment travel Tool holder 220 mm Grinding head carrier 800 mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool holder 360 degrees Grinding spindle: Three-phase drive motor 1.1 KW at 2800 rpm Spindle speeds, stepless 2000 to 12000 rpm Max. grinding wheel diameter 125 mm Max. cutting wheel diameter 200 mm Dimensions: Weight 520 kg Dimensions (D x W x H) 800 x 1100 x 1760 mm Space requirement (including operation) 2.5 x 2.3 m Accessories and equipment: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly fast, economically, and flexibly, with the highest operating comfort. The Deckel S11speed is in very good condition. Mechanically and electrically tested. Take the opportunity to visit and test this machine on site under power.

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Isdpfx Abom E T Anecsap Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: excellent (used), Year of construction: 1995, Tool grinding machine Michael Deckel S5 in very good condition Technical data: >> year of construction 03/1995 >> grinding wheel diameter max.100mm >> spindle speed 5600 1/min >> power consumption 1,5KW >> weight 450KG Accessories: >> Swiveling dividing head SK40 >> div. mountings SK40 Isdpfx Abopr U Etsceap To the machine : Offered is a tool grinding machine of the brand Michael Deckel S5. The machine is suitable for grinding high precision parts. The Deckel S5 is in a very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try this machine on site under power.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Excellent Condition! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Tool slide mounting surface: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm >> T-slot width on grinding head, tool slide and accessories: 8 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool slide: 100 mm Vertical feed grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Iajdpsxu E Nqefx Abcsp Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc. Tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground astonishingly quickly, economically and flexibly, all while providing maximum operating comfort. The Deckel S11 is in excellent condition and comes equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: excellent (used), Universal tool grinder Michael Deckel S11 with accessories and tool cabinet in very good condition !!! Technical data: >> Year of construction 1986 >> serial no. 759 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. Tool diameter between the centers 130mm >> Max. Max. tool diameter with flying clamping in the universal dividing head 620mm >> Max. Tool lengths between centers 270mm >> T-slot machine stand 12mm >> T-slot grinding head, tool slide and accessories 8mm Movement range: >> Working paths Sanding stroke 190mm Grinding stroke for swirl grinding 190mm Cross adjustment of tool slide 100mm Vertical adjustment of grinding head 325mm Longitudinal adjustment of grinding spindle 5mm >> Rough adjustment travel Tool carrier 220mm Grinding head support 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head support 360 degrees Grinding head 360 degrees Tool carrier 360 degrees Grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speeds, infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter 125mm Max. Cutting wheel diameter 200mm Dimensions: Weight 520 kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2.5 x 2.3 m Accessories and equipment: Isdpfxoqd N S Dj Abceap 1 tool cabinet with the following contents: >> Universal dividing head SK40 >> Twist and relief grinding device >> SK40 radius grinding device >> Tailstock >> Swivel support finger >> Machine vice >> Sk 40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutter >> Tooth supports >> Indexing head >> Protective covers >> 1 set of collets as good as new from 1 to 17.5 mm 0.5 mm increasing >> Grinding wheel holders >> various grinding wheels >> dividing wheels >> suction device with vacuum cleaner >> various holders and much more (as shown in the pictures) About the machine : We are offering a Michael Deckel S11 universal tool grinding machine. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly quickly, economically and flexibly with maximum ease of use. The Deckel S11 is in very good condition and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: new, Year of construction: 2025, operating hours: 2 h, functionality: fully functional, rotational speed (max.): 2,700 rpm, power: 0.55 kW (0.75 HP), warranty duration: 12 months, Original ISELI Sharpening Machine for Chisels and Hand Tools – For Sale Iasdpfjrm Sy Eex Abcsp For sale is an original ISELI sharpening machine, specifically designed for precise, clean, and repeatable sharpening of chisels and a wide range of hand tools. This machine is ideally suited for carpentry workshops, professional trades, and quality-focused hobbyists who demand accurate results and long-term reliability. ISELI machines are renowned for Swiss precision and craftsmanship – Made in Switzerland. Thanks to its robust construction, compact design, and user-friendly operation, this sharpening machine is built for daily use over many years. Details: • Manufacturer: ISELI Maschinenfabrik AG, Switzerland • Condition: Very good (showroom machine) • Application: Chisels and various hand tools • Highlights: Solid construction, precise sharpening results, durable Swiss quality Pickup / Shipping: Pickup in 6247 Schötz (Switzerland) or shipping available by arrangement. Please feel free to contact us for further information or inquiries.

Condition: used, Year of construction: 2018, control Fanuc Isdpfoxb Effsx Abceap weight of the machine ca. 1550 t

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 278, workpiece weight (max.): 50 kg, grinding wheel diameter: 150 mm, grinding length: 340 mm, rotational speed (max.): 8,000 rpm, workpiece diameter (max.): 250 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bids are binding and require collection within the period 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Max. grinding wheel diameter: 150 mm Speed range: 1,000 – 8,000 rpm Workpiece spindle taper: SK 50 Max. workpiece weight: 50 kg Max. diameter: approx. 250 mm With tailstock: max. 125 mm Ijdpfx Aboxm Rnvjcoap Max. length: approx. 500 mm With tailstock: max. 250 mm Max. grinding length: 340 mm X-axis grinding stroke: 340 mm Y-axis traverse: 240 mm Z-axis traverse: 240 mm A-axis speed: 120 rpm A-axis swivel range: 360° C-axis speed: 20 rpm C-axis swivel range: 197° MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,400 mm Total weight: 2,500 kg EQUIPMENT Coolant filtration system Oil mist extraction Documentation