Condition: good (used), Year of construction: 2019, operating hours: 673 h, Functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 1,100 mm, bale width: 720 mm, overall weight: 12,500 kg, oil tank capacity: 800 l, power: 37 kW (50.31 HP), Technical data baler: Manufacturer Riko Ekos d.o.o Type S-60K (5) Year of construction 2019 Operating hours 673 hours, as of August 24 Number of pressed bales 1,127 bales, as of August 24 Pressing force main press 60 tonnes Dimensions of feed chute 1,100 x 1,400 mm Filling volume / pressing cycle 2.1 m³ Bale dimensions 720 x 1,100 mm (W x H), the length is variable Drive power 37 kW Connected load, total 47 kW Tying 4-fold horizontal, fully automatic Throughput capacity with a bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour Filling volume of hydraulic oil tank 800 litres PLC control Siemens SIMATIC S7-1200 Siemens SIMATIC HMI control panel Duslqou Thice Iy E Dot Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H) Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H) Transport weight press 12.5 tonnes Condition of the baler: The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use. Scope of delivery for the baler: 1 piece baler without conveyor belt, hopper and chute 8 pieces wire pulling stations, without wire 1 piece bale chute 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2003, operating hours: 1,990 h, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: BACKHUS 16.50 337 03, Machine: Machine no.: 16.50 337 03 Year of construction: 2003 Operating hours: approx. 1,990 Equipment: hydraulic joystick Air conditioning (new) SBA protective ventilation (particle dust filter in cab roof) Cab console with quick-change system (new) Special equipment: ORKAN rotor ventilation system (patent pending) (up to 4,000 m³/h fresh air intake during the transfer process) meetra Rhino rotor with 50 tools (W 150 x L 300 mm) can be used on both sides A camera with a 7 inch screen allows the driver to view the rotor, making it possible to adjust the optimum rotor speed to the material to be rotted. Condition: very good, service (new), track drive (new), rubber pads with quick-change system (new), track clearer overhauled, hydraulic hoses (new), frame sandblasted - repainted in RAL 6021 + 3027 Technical data: Width of windrow up to: 5.0 m Windrow height up to: 2.4 m Windrow cross-section at 45°: 6 m² Transfer capacity up to: 3,000 m³/h Feed speed: 0- 50 m/min Work dimensions: Height 4,500 mm Width 5,200 mm Length 4,780 mm Transport dimensions: Length: 2,550 mm Width: 7,150 mm Height: 3,150 mm Engine: Cummins QSC 8.30 lt, 6-cyl. 209 kW / 280 hp Weight: approx. 10,000 kg Engine: Machine-No.: 16.50 337 03 Year of built: 2003 working hours: approx. 1,990 hours Equipments: hydraulic joystick Air conditioning (new) Protective ventilation SBA (particulate dust filter in the cab roof) Cabin console with quick-change system (new) Special equipments: ORKAN Rotor ventilation system (Patent pending) (up to 4.000 m³/h Fresh air entry during the implementation process) meetra Rhino-Rotor with 50 tools (W 150 x L 300 mm) both sides usable A camera with a 7-inch screen gives the operator a view of the rotor. This makes it possible to adjust the optimum rotor speed to the rotating material. Dslskqxn Ioq Iy E Deut Condition: very good, service (new), chain drives (new), Rubber padding with quick-change system (new), track clearer revised, hydraulic hoses (new), Frame sandblasted - repainted in RAL 6021 + 3027 technical Data: Heap width up to: 5,0 m Heap height up to: 2,4 m Heap cross-section at 45°: 6 m² Displacement capacity: 3,000 m³/h Foreward speed: 0- 50 m/min Dimensions of work: height 4,500 mm width 5.200 mm length 4.780 mm Transport dimensions: Length: 2,550 mm Width: 7,150 mm Height: 3,150 mm engine: Cummins QSC 8.30 lt, 6-cyl. 209 kW / 280 hp Weight: approx. 10,000 kg

Condition: good (used), Year of construction: 2011, Functionality: fully functional, overall weight: 30,000 kg, power: 250 kW (339.91 HP), input voltage: 400 V, Stationary shredder LINDNER Jupiter 2200. Electric drive: 250 kW Including switch cabinet and hydraulic unit. Duelq Iy Esuv Htus Djt

Year of construction: 2004, Condition: used, SECOND-HAND SUBFILTERING PLANT CARPENTERIA MANZANESE MOD. FST 270M - CE RULES - capacity 60.000 mc/h Duolq Iy Eeiphtxj Dst - bags dimensions 200x2500 mm - n.3 motors 40+25+15 hp - year 2004

Year of construction: 2000, Condition: ready for operation (used), A large Untha recyclable material shredder for plastics is ve power: 110kW, cutting unit opening X/Y: 1840mm/2000mm, cutting system: ÜSS S36, shafts: 1, machine dimensions X/Y/Z: 3750mm/2950mm/2650mm, weight: approx. luding hopper, base frame, press-in device and various perforated screen umentation available. Duolq Iyewaa Ibj E Det

Condition: used, Year of construction: 2014, pressing force: 122 t, overall weight: 40,000 kg, pressure: 315 bar, Machine has been used but is surplus and therefore for sale! Duelq Iyowa N U De E Djt

Year of construction: 2013, Condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: Dujlq Iysu Thpns E Dot The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Year of construction: 2002, operating hours: 3,500 h, Condition: reconditioned (used), machine/vehicle number: BACKHUS 16.50 308 03, Gewicht / machine weight: approx. 10 t Transport dimensions / Transport dimensions: Breite / Width: 7,150 mm Length: 2,550 mm Working dimensions: Width: 5,200 mm Length: 4,780 mm Dolsqqidhsq Iy E Deut Height: 4,500 mm Diesel engine: Cummins, QSC8.3-C260 Rotor diameter / Ø Rotor: 1,200 mm Rotor length / Rotor lengh: 4,380 mm Clearance height: 2,200 mm Heap width: 5,000 mm Heap height: 2,400 mm Heap cross section at an angle of repose of 45°: 6 m² Heap cross section: 6 m² Heap displacement / longitudinal heap displacement approx.: 2.5 m Turning radius: 3,100 mm Grain size: 0 - 300 mm Foreward speed: 0 - 50 m /min Displacement capacity: 300 - 3,000 m³/hours Baujahr / Year of build: 2002 Betriebsstunden / Working hours: app. 3.500 h Zustand / Condition: Sehr gut / very good, Service neu / service new, inkl. Farbaufbereitung

Condition: reconditioned (used), Year of construction: 2018, operating hours: 3,317 h, overall weight: 19,000 kg, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size on agreement) Rear discharge conveyor with magnet roll Dslq Iy Ejt Egdde Djut Hydr. self propelled drive (for moving on site) Twin drive separate drives for scraper floor and infeed roller Radio remote control

Year of construction: 2008, operating hours: 5,459 h, Condition: good (used), Cable disassembly. Dujlq Iovvkxksy E Dst

Year of construction: 2017, Condition: ready for operation (used), A Untha recyclable material shredder for plastics overhauled in 2020 is available. Drive power: 55kW, cutting unit opening: 1400mm/1800mm, rotor length: 1400mm, rotor diameter: 450mm, rotor speed: 92rpm, knife rows: 3, cutting tools: 112, cutting system: S34/S/KO, screen hole diameter: 12mm, motor efficiency class: hine dimensions X/Y/Z: approx. 2200mm/2300mm/2500mm, weight: approx. 5600kg. Including built-in base frame and beam pressure system. Dolq Iswaa Ihey E Djut

Condition: as good as new (ex-display), Year of construction: 2023, Special price for our prefeeder Another machine, available immediately (ex works Neckartailfingen) approx. 24 operating hours. Including: + profile rotor for increased throughput Options: Double row of knives + 895 € net Veneer and paper scraper + 970 € net * Recommended for extremely thin materials with a thickness of less than 3 mm Our mütek MRZ 530 single-shaft shredder shreds a wide variety of materials such as all types of waste wood, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cable, paper, cardboard and plastics. The machine is characterized by its robust design, which guarantees consistent quality in continuous operation. Djlq Iyjd Db N Ie E Deut We will be happy to carry out a free test with your material. We invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we can document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Blades: multi-rotatable, Rotor diameter: 260 mm, Control: PLC Siemens S7-1200, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 qbm, throughput 1 - 5 hopper fillings / h, hydraulically operated pusher, Screen perforation of your choice (10 - 40 mm), suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30 % atro. Included as standard: - Fast hydraulics - Profile rotor - Switch cabinet with Siemens PLC control - Automatic star/delta start - Automatic OFF when the rotor is idling - Removable suction chute - Speed 70 - 100 rpm for higher throughput capacity - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Stable guides for the hydraulic slide Other shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Folding conveyor belt +8,770 € net Horizontal part: 1200 mm Rising part: 2500 mm Angle: 0-60 degrees adjustable Discharge height: approx. 2000 mm + - 100 mm - Overbelt magnet + 5.980 € net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) . Requirements for the output or raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Condition: excellent (used), Year of construction: 2012, operating hours: 18,593 h, Functionality: fully functional, pressing force: 140 t, bale weight: 1,300 kg, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 47,000 kg, nominal current: 470 A, Technical data baler: Manufacturer Bollegraaf Typ HBC 140 K Year of construction 2012 Working hours 18.593 hours, stand September 2024 Press power main press 140 tons Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 248 kW Full load current 470 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Dujlju Thy Ejq Iy E Det Baler dimensions built up with hopper 13,200 x 2,750 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 47 tons Special equipment: 2-flap pre-compressor for large cardboard boxes and octatainers Wirbulator for magazines and books Comments: The press is currently in operation and is to be replaced by a new machine in the second calendar week of 2025. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2006, operating hours: 3,459 h, fuel: diesel, Year of manufacture: 2006 Colour: Green Field of application: Construction Drive: Wheel Empty weight: 6.500 kg CE mark: yes Komptech Hurrikan. Year: 2006. Hours: 3459. Max weight: 6500 kg. CE Machine. Axle load: 600 kg Alko axle. 53 KVA. 400 V 63 A. New Perkins diesel engine. Tyres: 285/70R19,5 80%. German Machine including german street registration! ID NR: 391. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices. Duslq Iy Eewazgfo Dot

Condition: excellent (used), Year of construction: 2019, power: 260.37 kW (354.00 HP), DOPPSTADT INVENTHOR Type 6 - Roller drive via planetary gearbox 260 kW - VARIOLoad sensing system - Fuel tank 500 litres - Longitudinal belt: belt length 2,900 mm, belt width 800 mm - Centralised lubrication bars - 24 V electric control Duoljun R Tuoq Iy E Djt - Additional electric pump for actuating the following functions when the engine is at a standstill: *Lift/lower/fold rear belt *Open/close comb flap *Open/close comb *Raise/lower folding hopper - Radio remote control cpl. - Large side GRP maintenance doors - LED light package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Acoustic start-up warning

Condition: as good as new (ex-display), Year of construction: 2024, Special machine for shredding plastics Basic machine from €24,990 net Well suited for shredding: - Paper, cardboard boxes, pipes, profiles, boxes, canisters, buckets, cans, sections of wooden pallets, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - special rotor with embedded blades (reduced load capacity), - small cutting gap between blade and counter blade Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Control: PLC Top cutting unit opening 600 x 800 mm The parts should be a maximum of approx. 500x500 mm in size *the height is less important hydraulically operated slide, sieve hole of your choice (25 - 40mm) For plastics, coarser sieves are recommended (30-40 mm) *If you want to shred more finely, a two-stage shredding process is recommended with downstream granulator type MVZ (sieves 5-15 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm Other options available for an additional charge: - Raise the shredder by approx. 25 cm (Preparation for conveyor belt removal) + €995 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,490 net - Overband magnet + €6,750 net - Control of conveyor belt and overband magnet + €2,495 net (Start and stop synchronized with the chipper) - Alternatively, manual start and stop on the conveyor belt + €497.50 net . Requirements for the raw material: - The moisture content (atro) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. . We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos. --- *only for brittle plastics with a medium degree of hardness, *not for elastic or extremely hard and heavy plastics - this would affect the durability of the system. --- Optional would be the next larger machines Basic machine: Shredder MGZ 830 K-S - 18.5 kW Cutting unit opening at the top 800 x 1,000 mm The parts should be a maximum of approx. 720x700 mm *the height is less relevant from €39,995 net * Options depending on the effort Basic machine: Shredder MGZ 1030 K-S - 22 kW Cutting unit opening at the top 1,000 x 1,000 mm The parts should be a maximum of approx. 900x700 mm *the height is less relevant from €49,975 net * Options depending on the effort Basic machine: Shredder MGZ 1330 K-S - 37 kW Cutting unit opening at the top 1,300 x 1,200 mm The Parts should be a maximum of approx. 1,200x700 mm in size *the height is less relevant Duslq Ijd H R Sxsy E Det from €79,975 net * Options depending on effort

Condition: excellent (used), Year of construction: 2009, operating hours: 20,536 h, Functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, net weight: 16,000 kg, nominal current: 75 A, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Duolqju Thypj Iy E Dst Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Due to a reorganisation of the manufacturing processes within the company, a new baling line is being built in a new hall. The old baling press with conveyor technology is therefore no longer required and is expected to be available for sale at the beginning of 2025. Technical data for the chain belt conveyor: Manufacturer not known Type not known Length of feed belt 5,300 mm Length of ascending belt 12,700 mm Overall height 7,300 mm Useful width 1,200 mm Unfortunately, no further technical data, documentation or drawings are available. Condition of the press system: The entire system is in very good condition and is regularly cleaned and maintained by the operator. The quality of the bales is exceptionally good, as you can see from the photos of the pressed bale goods. Even hard plastics such as plastic crates, PP bucket chains and PE plastic drums were pressed into dimensionally stable bales with the fourfold vertical binding. Tidiness, cleanliness and maintenance of the systems are practised in this company and not just written on the website. Scope of delivery: Avermann baler, type AVOS 1410-45/80, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available in full. Unfortunately, there is no more documentation for the conveyor belt. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, power: 257.42 kW (349.99 HP), Mobile shredder LINDNER MIURA 1500. Duslqju Di Aze Iy E Djt Foldable discharge conveyor. Radio remote control.

Condition: as good as new (ex-display), Year of construction: 2023, Demonstration machine with approximately 10 operating hours Another machine available immediately (ex works in Neckartailfingen) *Options available for an additional charge - see below Included: + Profile rotor for higher throughput We would be happy to conduct a free test with your material. I invite you to visit us in Neckartailfingen. You can also send us your material via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15, multi-rotatable, Double row of blades available for an additional €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Funnel volume: approx. 0.6 m³ Hydraulic slide gate Duslqjb Ny Eys Iy E Djt Screen perforation of your choice (10 - 40 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg Dimensions (l x w x h): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% dry matter . Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start-up - Fast hydraulics - Automatic OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . Shredder options available for an additional charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,080 net - Eco-Rings: + €1,980 net (recommended for more than 20% hardwood) - Double row of blades + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or items with a material thickness of less than 3 mm) - Bent conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm - Automatic overhead magnet + €5,980 net Alternatively, a fixed magnetic block above the conveyor belt for regular manual scraping + €990 net (for low-volume shredding) Metal parts) - Conveyor belt and overhead magnet control + €2,750 net (Start and stop synchronized with the chipper) or manual start and stop of the belts + €595 net . Raw material requirements: - Moisture content (absolute dry matter) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: used, For sale is a sorting plant for commercial waste, paper, cardboard, plastics etc., year of construction 2022, only 151 operating hours, with a sorting capacity of up to 20,000 tonnes/year, in two-shift operation. The plant consists of the following components: 1 piece feeding / dosing hopper with steel slat conveyor and a dosing drum, manufacturer Bollegraaf, type BDF-1200/2000 1 piece ascending conveyor between the feed hopper and the sorting cabin, manufactured as a troughed conveyor, manufacturer Lubo Systems, type TBM 2000 x 15000 1 piece sorting cabin, air-conditioned (heated), measuring 14,500 x 5,732 x 3,270 mm (l x w x h), with 4 sorting stations, 8 discharge chutes and 5 material bunkers underneath. The concrete blocks are not included in the scope of delivery of the sorting system. Dolqsu Tg S Ao Iy E Dout 1 piece sliding belt conveyor as sorting belt, manufacturer Bollegraaf, type HBGT 250/1400 * 15000 1 piece ventilation system for the sorting plant with an air capacity of 8,000 m³/hour, heated with 93.8 kW electrical heating power, manufacturer MANDIK. The area required to install the sorting system in its current configuration is at least 46 x 7.5 m (345 m²). The height of the sorting cabin including the ventilation pipes is 7,370 mm. Remark: The system is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without the use of materials) if required. The plant is sold ex works. The dismantling and loading of the entire system as well as the broom-clean handover of the hall is at the risk and expense of the buyer. The owner can provide sporadic logistical support during dismantling with forklift trucks, wheel loaders and excavators. Technical documentation for the system and the components (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) is only available in German. The existing control cabinet controls all of the customer's machines in two halls and is therefore not included in the scope of delivery of the sorting system. The control cabinet is disconnected on site, dismantled and remains with the previous owner in order to be able to continue operating the remaining systems on site. Only the frequency converters for the individual machines of the sorting plant are included in the scope of delivery. The concrete blocks under the sorting plant are also not included in the scope of delivery and remain with the previous owner on site. A viewing of the plant is possible by appointment after the prospective buyer has sent the complete company details (self-certification) and a subsequent credit check. We accept no liability for the technical details or any errors.

Condition: reconditioned (used), Year of construction: 2017, Functionality: fully functional, power: 564.86 kW (767.99 HP), VOLVO diesel engine: 768 HP Tilting hopper Lift-axle Discharge conveyor with overband magnet Dslqstpqche Iy E Dsut Radio remote control

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, Functionality: fully functional, pressing force: 70 t, bale weight: 500 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Delq Iy Eou Thbxe Djut Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2004, Condition: reconditioned (used), Mobile drum screen TERRA SELECT T6. Length of the drum: 5.50 m Diameter of the drum: 2.20 m Hole size of the drum: on agreement With vibro grid. Dslq Iyoiw Ebko E Dout We can also offer financing if required.

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ Duolq Iou Thkaey E Djt The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2015, operating hours: 4,117 h, Condition: excellent (used), Mobile trommel screen DOPPSTADT SM 620 Profi. With stone grid. Central lubrication system Screen drum length: 5.50 m Screen drum diameter: 2.00 m Screen drum perforation: by arrangement Duelq Iy Eorpzw Dj Dst