Condition: good (used), WMA WMP 08 Single-handed butt point machine Air-cooled single-handed impact point system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - Problem-free welding of all sheet metal - galvanized sheets can be welded perfectly thanks to controlled current increase and controlled current decrease - Air-cooled, equipped for external water cooling - tools are easy to change thanks to standardized swivel connections - only one plug each for welding power cable, control cable and water cooling - reproducible welding results at all times thanks to built-in, automatic energy control Microprocessor thyristor control - constant current control - seamless process monitoring - Easy and convenient to operate - all set parameters and process variables can be read at a glance - welding parameters can only be changed by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor thyristor controller - 7 times - 8 programs - Built-in device - Automatic mains frequency detection 50/60 Hz - Power failure-proof storage of parameters - "with/without power" switchover via button Additional configuration parameters locked for users): - Program selection - Progressive contact - Time of continuous contact - Two-hand interlock (check) - Interlock Start signal - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - Delay 1st half-wave External inputs (24V, DC stabilized and switching) - Thermoswitch - Thyristor temperature - EMERGENCY OFF - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke On - Program interruption after hold-off time (only force) - Two-hand interlock (check)* * These functions can be activated or blocked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Welding solenoid valve - Relay Advance contact - Relay Ready for operation Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Fjln S Aeq H Aqxsmpegb Mains frequency: 50 Hz Rated power (at 50% duty cycle) 22.5 kVA Switch cabinet with PLC logo PDF files under Documents tab Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2019, Accessories: Orbiweld TP600 mit drahtzuführun 70-170mm Foln S Aeguk D Sjmpjgb Orbiweld TP1000 mit drahtzuführun 120-275 Orbimat P16 Rohrend Schweiße

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) Fjlsvg Rh Ton S Ampegb - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 180991_03, This is a Wagner spot welding machine TYPE: 0281000-110A-AC with FELDPAUSCH nut and bolt feeder YEAR OF MANUFACTURE: 2019 Supply voltage: 40V Fsln Sjvgd Efj Ampjgb Rated frequency: 50HZ Secondary current max: 17kA Rated power at 20% ED: 110 kVA Welding force: 1 KN at 1 bar Max. operating pressure: 10bar FELDPAUSCH nut and bolt feeder TYPE: MSV 08

Condition: new, Year of construction: 2024, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Feljhv U T Hen S Ampogb CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-TA-6022 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Fgjlnjtiy I Ie S Ampsb Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Year of construction: 2014, Condition: good (used), Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Fgeln S Ael Smn Sjmpob Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2018, Condition: ready for operation (used), Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible. Fgjln S Amju Izq Sjpsb

Condition: good (used), Year of construction: 2009, machine/vehicle number: 20080229, This is a C-frame welding station Type: 130 MF Machine-No.: 20080229 Fgelovgdt Aon S Ampsb YEAR OF MANUFACTURE: 2009 U1N: 400V / 50HZ U20: -9V level 1 S1: 58kVA I2p 6.46kA ED 100% S%: 130 kVA ED 20% Fmax: 1140daN at 6 bar I20c: 42.5 kA Q: 18L/min Opening: up to 170mm Projection: 350mm Control cabinet: Machine no.: 20100079

Condition: good (used), Merkle Insquare 300 AC/DC welding system Primary: Voltage: 3 x 400 V frequency: 50 (60) Hz cos phi: 0,95 The welding machine was technically overhauled. The welding machine is supplied with a hose package. (photos will follow) TIG DC range: Open circuit voltage: 80 V Working voltage: 10-22,8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) primary continuous power: 9.5 kVA primary continuous current: 13,7 A primary maximum current: 19 A TIG AC range: open circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) primary continuous power: 9.5 kVA primary continuous current: 13,7 A primary maximum current: 19 A Electrode welding mode: Stick electrodes: 1.5-6 mm open circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) primary continuous power: 13.1 kVA primary continuous current: 19 A primary maximum current: 22 A Welding method: Switch 10-stage: TIG DC Minus, TIG DC Plus, TIG DC Minus w. start pulse, TIG AC low noise, TIG AC rectangular TIG AC "Balanced TIG", Electrode Minus Electrode Plus Electrode "Sine Electrode square wave Selector switch 1: Switch 10-step: Current 1, Time 1, rise & fall time, start current, end current, ignition pulse, point time, gas pre- and gas post-flow time Selector switch 2: 9-step switch: Current 2, Time 2, (for pulse operation), AC balance, AC frequency, Hotstart time & current, current readjustment, electrodes d, display U Settings: 2 rotary encoders for selector switch 1 and 2 Indicators: 2 LED displays with advance indication and hold function for current, voltage, time, frequency Time functions: Switch 4-stage: OFF, pulsing slow, pulsing fast, points Ignition: switch 4-stage: OFF, high frequency, lift tig Energy control: switch 4-stage: on the system, hand or foot remote control, welding torch Operating mode: switch 4-stage: 2-stroke, 4-stroke, 4-stroke with 2 currents, gas test, test, program Fgsln Sel Sm Hbo Ampjb Program memory: 20 memory locations freely assignable AC frequency: 50-200 Hz AC balance: 9-91 % Gas pre-flow time: 0-3 s Gas afterflow time: 0-25 s Current rise time: 0-2 s Current decrease time: 0-20 s Ignition pulse: 0-100 ms Dot time: 0.1-2.5 s Pulsing slow: 10 ms-2.5 s Pulsing fast: 50 Hz-5 kHz Hotstart time: 0-1.5 s Hotstart current: 10-200 % Current readjustment: 100-250 Pushbutton: Test protection device button: program selection LED: Mains ON, overtemperature, fault, protection circuit, display hold, start current increase, current 1, current 2, decrease, final current Current source: IGBT inverter Ignition: High frequency or lift tig Standard: EN 60974-1 "S" / CE Burner connection: EURO central connection with 5-pin plug Cooling torch: Water circulation cooling device Socket 50 mm²: workpiece cable Socket 50 mm²: Electrode welding cable Mains connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder gas bottle holder: 10 - 20 - 50 l gas bottle More items - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2021, Condition: ready for operation (used), Track width: 3600mm, table dimensions: 6200x2300/ 3200x2500mm, max. workpiece thickness: 150mm, length: 10,700mm, width: 5070mm, height: 1980mm. With four oxyfuel torches, bevel cutting, segment-by-segment extraction of the areas where firing takes place, automatic gas setting (OmniFlow) for cutting oxygen (max. 15bar), heating oxygen (max. 10bar), fuel gas (max. 2bar), ALFA MS 4452/250 machine cutting torch, OmniWin2021 software. Available from February 2025, an inspection on site is possible. Feln S Amsu R Uvyspjgb

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: N 1000 1687, This is a NIMAK BMP 6-6/260MF spot welding machine ARTICLE NO: N 1000 1687 U1N: 400 V / 50 HZ SP: 116.3 kVA U20: 13.2V in 1 stage I2CC: 55kA I2p: 8.8 kA Fmax: 1600 daN P1Max: 10 bar P1Min: 6 bar Weight 790 KG Fgeln S Amsvf Hh Tjpjb Cooling water: 24L/min

Year of construction: 2007, Condition: ready for operation (used), A CNC CO2 laser cutting machine Bystronic is available. Laser medium: CO2, wavelength: 10800µm, laser diameter: 20mm, laser power: 4400W (4.4kW), working range X/Y/Z: 4000mm/2000mm/1700mm, max. material thickness: 25mm/20mm/12mm, max. workpiece weight: 1600kg, simultaneous positioning speed: 113m/min. Machine dimensions X/Y/Z: approx. 16000mm/6700mm/2100mm, weight: approx. 20000kg, control: Bystronic ByVision. Documentation available. On-site inspection is possible. Fgoln Sovtb Hge Ampjb

Year of construction: 2010, Condition: ready for operation (used), A welding robot with positioner and associated welding technology is available. 1) Robot Kuka KR 5 arc HW, year of manufacture: 2010, payload: 5kg, reach: 1423mm, axes: 6, repeat accuracy: +/-0.04mm, dead weight: 126kg. 2) Turn and tilt positioner SMT DSP 2000, year of manufacture: 2008, power: 12kVA, load capacity: 2000kg. Including associated welding technology. Documentation available. On-site inspection is possible. Expected to be available from September 2025. Fgoln Sevb Hbxo Ampeb

Year of construction: 1999, Condition: ready for operation (used), Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible. Fgeln S Asuui Ecompob

Condition: ready for operation (used), Year of construction: 2008, Laser type: CO2, laser power: 2.2kW, working range X/Y/Z: 1500mm/3000mm/100mm, max. material thickness: aluminum: 8mm, mild steel: 10mm, stainless steel: 6mm, max. workpiece weight: 890kg. Positioning speed X/Y: 100m/min, simultaneous positioning speed: 140m/min, total energy consumption: 37kW, max. sheet weight: 70kg/m². Dimensions X/Y/Z: 6000mm/6400mm/2150mm, weight: approx. 13500kg. Fjljttv T Son S Ampogb

Year of construction: 2008, Condition: ready for operation (used), Laser power: 1kW, laser type: CO2, control: Fanuc 160i-L, working range X/Y/Z: 1250mm/1250mm/100, max. sheet thickness (steel): 12mm, max. sheet weight: 160kg, positioning speed X/Y/Z: 30m/30m/15m /min. Dimensions X/Y/Z: approx. 2200mm/2900mm/2000mm, weight: approx. 3300kg. Documentation available. Feln Sjtyaw Is Ampjgb

Year of construction: 2015, Condition: ready for operation (used), Welding robot: RV20-16 with turntable, welding source: Merkle High Pulse 551 RS, positioner: integrated welding positioner, cabin equipment: double station with high-speed doors, welding type: MIG/MAG welding. Machine dimensions X/Y/Z: approx. 3800mm/2400mm/2200mm, weight: approx. 3750kg. Including all available tools, spare parts and accessories. Documentation available. On-site inspection is possible. Felnjuiykqj S Ampjgb

Condition: ready for operation (used), A used submerged arc welding system from Oerlikon is for sale, which was regularly serviced and fully functional until last year. The system is mounted on a crane rail and has a cross travel arm with a travel distance of 10 meters, which carries a 6.5 meter long boom that can be extended up to 5.5 meters. The system includes four power sources, each with 1,000 amps from Oerlikon/Miller, suitable for tandem welding with two quills, each with a travel distance of 2 meters. It is designed for welding wires with diameters of 2.4 mm, 3.2 mm and 4.0 mm. Although the unit is designed to be rotatable, it is currently stationary due to an attached trolley for welding consumables. Documentation available. On-site inspection is possible. Fgeln Sjtia E Sj Ampjb

Year of construction: 1995, Condition: ready for operation (used), A welding cell with Kuka robot is available. Robot: nominal payload: 30kg, max. payload: 36kg, reach: 2100mm, number of axes: 6, repeat accuracy: +/-0.06mm. Dalex welding machine: electrode force: 215-1290daN, rated power: 100kvA, throat depth: 250mm, stroke: 200mm, weight: 720kg. Fjln S Aotxbz Sjmpjgb

Condition: ready for operation (used), A PlymoVent welding fume extraction system is available. Compressed air tank volume: 11l, compressed air quality: class 6, operating pressure: 4bar-5bar, compressed air consumption per pulse: 40nl-50nl. Documentation available. On-site inspection is possible. Fgjlnsvgffts S Ampjb

Year of construction: 2006, Condition: ready for operation (used), A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible. Fjln Ssviv Dle Ampjgb

Condition: ready for operation (used), Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible. Fjln S Asu N Hc Asmpogb

Year of construction: 2011, Condition: ready for operation (used), A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025. Fjln Sst Nhm Is Ampegb

Year of construction: 2010, Condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Fgjln S Ajri Skaempeb