Used welding sets for sale (322)

Condition: good (used), Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 Dsdpfx Asqvp Nkjizscp -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Djdpezd Rmgofx Aizscp Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, type plate available, Rehm Focus ARC P400 Dsdpfxjy Tzhio Aizocp

Condition: new, functionality: fully functional, type of input current: three-phase, total height: 575 mm, total width: 300 mm, total length: 600 mm, input voltage: 400 V, overall weight: 39 kg, type of cooling: air, electrical fuse: 32 A, sheet thickness aluminum (max.): 8 mm, welding power (max.): 13 kVA, open-circuit voltage: 70 V, welding current at 60% duty cycle: 280 A, welding current at 100% duty cycle: 250 A, input current: 15 A, protection type (IP code): IP23, welding current (min.): 300 A, welding current (max.): 10 A, Professional inverter TIG/MMA welding machine LogiTIG 300 AC/DC for sale. Suitable for welding aluminum, stainless steel, and mild steel. The machine supports TIG AC/DC and MMA modes, and features HF ignition, pulse function, 2T/4T modes, adjustable AC frequency, and balance control. Dcjdpoy U E Rwjfx Aizsp This unit offers a high duty cycle of up to 300 A, making it suitable for professional and industrial applications. Compatible with foot pedal and remote control connections.

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment Dcjdpfx Aiortvi Ujzjp - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: used, Shielding Gas Welding Machine MIG-O-MAT Type U 405 Serial No. Year of manufacture 1991 Output 400 amps = 60% duty cycle 280 amps = 100% duty cycle Adjustment range 18 steps Torch hose length 5 meters Power supply 380 V, 50 Hz, 32 amp plug - Spot and interval welding function - 2-stroke and 4-stroke welding functions - Wire feed with 2-roller drive - Water-cooled - Shielding gas pressure regulator - Supplied with 1.2 mm welding wire Dimensions L x W x H: 1300 x 500 x 900 mm Dcedpfeyy Dfqox Aizep Weight approx. 200 kg In good condition

Condition: good (used), Wire Welding Machine Stock number: 2793 Dcsdpfxjx Uwcfj Aizjp Manufacturer: CEA Year of manufacture: Model: Maxi-compact 370 2100 HE 1252 Machine number: 9004382 Welding current at 35% duty cycle: 370 A / 32 V at 60% duty cycle: 300 A / 29 V at 100% duty cycle: 230 A / 25 V Connection: 18 kVA Cooling type: Equipment: Torch hose package for connection; welding torch; mobile unit Dimensions: 1,000 x 700 x 1,000 mm Weight: 0.5 t

Condition: good (used), Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case Dcsdpfxevm U R Es Aizep -Manufacturer: Dinse gas-cooled wire feeder case -Type: DIX -Quantity: 7x wire feeder cases available -Price: per piece -Dimensions: 700/250/H390 mm -Weight: 27 kg/pc.

Condition: used, Technical details: power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 64 kg dimensions of machine: 0,65 x 0,32 x 0,5 m Welding rectifier/inverter MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Dsdpfx Aou Nwd Djizecp Cooling type: F (water cooled) Protection class: IP 23 without hose package without grounding cable *

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Technical data: - Grooving width: 1 – 15 mm - Cutter head with reversible cutting inserts - Grooving angle: 30° - 37.5° - 45° - 60° - Power supply: 220 V / 1100 W - Dimensions (approx.): W 450 x D 300 x H 350 mm - Weight (approx.): 20 kg Dcjdei Ab Unjpfx Aizop - Transport case

Condition: used, Technical details: Dedpfx Asvz Abhsizocp welding current: 500 A weight of the machine approx.: 128 kg dimensions L x W x H: 1,2 x 0,8 x1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 4.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 4.7 m Wire feed: 4 roller drive with wire Ø for 1.0/1.2 mm *

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA) and manual electric welding Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Dcjdpfsu U Iixox Aizep Shielding gas / solenoid valve Gas-cooled torch head with remote control for welding current Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters *

Condition: used, Technical details: welding current: 440 V weight of the machine approx.: 242 kg dimensions L x W x H: 1,5 x 0,8 x 1,3 m MIG/MAG control unit: with 2/4-cycle switchover with 3x12 welding stages Cooling system: water-cooled with frost protection Shielding gas with solenoid valve and pressure reducer Hose package 3.6 m long Torch head Ground clamp with ground cable 4.8 m long Wire feed with 4 roller drive for wire diameter: Ø 1.0 mm/Ø 1.2 mm Djdevz Advopfx Aizjcp *

Condition: ready for operation (used), Migatronic MTE 440 WIG AC/DC welding machine for steel and aluminum. Water cooling system: Migatronic CTU 3000. The maximum welding current is 440 A. Inspected by EWM Service. You are welcome to visit us for an inspection. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. If you have any questions, please do not hesitate to contact us by phone. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change. Djdpfx Aish Ib Idjzscp Shipping is exclusively to business customers; for private consumers, only collection is possible.

Condition: used, 1 used welding machine Manufacturer: Fronius Model: Synergic 3400 G/W/E Dsdpfxoyl Id Te Aizecp Suitable for welding steel, stainless steel, and aluminium using the MIG/MAG process. Technical specifications: Max. welding current: 340 A Wire diameter: 0.8/1.0/1.2 mm possible Connection voltage: 380 volts Duty cycle (ED) 35% at 340 A Digital display Dimensions (L x W x H): 890 x 460 x 945 mm Total weight: 139 kg

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 with separate wire feed case Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires, steel [Ø in mm]: 0.6 - 1.6 Weldable wires, stainless steel [Ø in mm]: 0.8 - 1.2 Weldable wires, aluminium [Ø in mm]: 1 - 1.6 Weldable wires, CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Continuous MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Dodpey Ia Hmjfx Aizjcp Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Mains: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Line protection 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulating material class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling type: Gas-cooled, water-cooled Cooling Nominal cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Dimensions wire feeder case (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Why buy from us rather than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! Dcodpfxsvlwh Ds Aizep - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Insured shipping on pallets is of course possible! All prices are starting from £100. You can configure the devices with us. Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. It's best to call us. We'll discuss your application and give you an initial price estimate.

Year of construction: 2018, condition: used, current intensivity 400 A weight of the machine ca. 125 kg dimensions of the machine ca. 470x1025x865 mm min. current voltage (V) 400 max. current voltage (V) 400 min. Welding current intensity (A) 10 max. welding current intensity (A) 400 Fuse protection 25 Dedpfxenf Ir As Aizjcp IP protection class 23 Insulation class H

Condition: like new (used), Year of construction: 2018, Set for robotic plasma welding .( Robot not included - without robot ) Dcjdpfx Aisrfuc Hjzsp Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Dcsdpsyhq A Rofx Aizjp Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: refurbished (used), Stable arc – for DC and AC. The V 27 is available in all power versions as a DC and AC/DC model. The V 27 is fundamentally characterized by a very stable arc. When welding with AC, the current waveform is optimized for both excellent cleaning of the aluminum oxide layer and reduced noise. Additionally, the AC/DC version features an arc spot function. Thanks to the rectangular current waveform, the V 27 excels with increased power and maximum arc stability when welding aluminum. Robust and safe: the V 27 housing. The high-end technology inside the V 27 is protected by a robust industrial housing made of metal – ideal for outdoor use. In addition, the fully load-bearing handles allow the power source to be suspended from a crane and also serve as a holder for the hose pack. The double gas cylinder securing system ensures a maximum level of safety in the production environment. Pulsing and fast pulsing up to 20 kHz. The integrated pulsing and fast pulsing function up to 20 kHz is particularly well suited for processing thin sheet metal. It also enables excellent weld pool control and guarantees perfect results – even with difficult welding tasks. Energy efficiency at full performance. The integrated standby function ensures the automatic switching on and off of individual components. Thermocontrol sensors monitor the temperature of the system and control the fan as needed. This reduces fan noise and dust levels inside the machine and also saves energy. Optimal parameters with SmartBase. Djdpfszibw Tox Aizscp Thanks to SmartBase technology, the arc is always perfectly matched to the electrode you have selected. Welding parameters, arc starting, and working range are automatically adjusted to the ideal settings. For optimal freedom, you can fine-tune the arc individually. This guarantees that you weld with the optimal arc for your needs. Technical data TIG welding Welding range 3~ 400 V:[A] 3 - 270 TIG duty cycle AC 400 V Duty cycle AC 100% (40°c):[A] 250 Duty cycle AC 60% (40°c):[A] 270 Duty cycle AC max. welding current (40°c):[%] 60 TIG duty cycle DC 400 V Duty cycle DC 100% (40°c):[A] 250 Duty cycle DC 60% (40°c):[A] 270 Duty cycle DC max. welding current (40°c):[%] 60 Electrode welding Welding range 400 V:[A] 20 - 220 Weldable electrodes:[Ø in mm] 1.5 - 4 Electrode duty cycle Duty cycle max. welding current (40°c):[%] 80 Process-independent data Open-circuit voltage:[V] 43 - 96 Power supply 400 V Power supply voltage 3~ (50/60 Hz):[V] 400 Power supply fuse 3~ (50/60 Hz):[A] 16 Positive power supply tolerance 3~ (50/60 Hz):[%] 15 Negative power supply tolerance 3~ (50/60 Hz):[%] 15 Power plug Power plug: CEE 16 Standards and approvals Protection class: IP23S Insulation class: F Standard/Norm: EN 60974-01 Labeling/Certification: CE, S Cooling type Cooling type: Gas-cooled, Water-cooled Cooling Standard cooling capacity (l/min):[kW] 1.1 Tank capacity:[l] 4.3 Dimensions Dimensions (LxWxH):[mm] 1.130 × 450 × 815 Weights Weight:[kg] 92 Weight water cooling (filled):[kg] 14.7

Condition: used, Year of construction: 2023, Operational machines! Dcodpfewctnaox Aizep Ask for additional information!

Condition: used, Technical details: welding current: 520 A Length: 1200 mm height: 1100 mm weight of the machine approx.: 147 kg dimensions L x W x H: 1,2 x 0,75 x1,1 m Djdpfx Aiswc R Udszecp Welding process TIG/E/MIG-MAG Delivery consists of: Welding transformer, feed unit, cooling unit Protection class IP23C Insulation class B/H *

Condition: used, 1 item = 720 kg of BÖHLER-THYSSEN stick electrodes Welding electrodes for electric arc welding Stored dry, in 6 kg packages Type Phoenix SH Yellow B + Phoenix Special Yellow AWS A5.1-91 Item No. 18952 Electrode diameter: Ø 5 mm Electrode length: 450 mm DIN: EN 499-E38 2 RB 12 - Rutile-based stick electrode. - Easy welding in root, fill, and cover passes - Excellent welding in all positions - Suitable for X-ray quality welding in pipeline, boiler, and tank construction - Can be used on factory-coated sheets - In unopened original packaging, stock item Dodpfsxcnktex Aizscp Total weight: 720 kg The scope of delivery is: 30 packages of stick electrodes, each containing 24 kg are available 1 package = 24 kg of stick electrodes, welding electrode for electric arc welding = 4 packages of stick electrodes, each containing 6 kg 720 kg = 120 packages, each containing 6 kg = 30 packages, each containing 24 kg

Condition: new, welding current max. 250 A open-circuit voltage max. 66 Volt connected load frequency 400 V weight 65 kg Dimensions (LxWxH) 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: Dodpey Aa Itjfx Aizecp incl. 3m hose package.