Plate Bending Machine - 4 Rolls

AKBEND AHS 30/06

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V Dsdpor H Df Iefx Agkecd

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dcjdsxdigfspfx Agkjd Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Ostas 4-roll round bending machine 4R OHS 2070 x 220 Hydraulic side roller infeed Hydraulic folding bearing Hardened rolls Conical bending device Separate control panel Roller length : 2000 mm Top roller diameter : 220 mm Side roller diameter : 180 mm Total motor power : 4+3 KW Weight : 4900 kg Dimensions (mm) : 4050 x 1550 x 1470 (L x W x H) Performance data bending: 11 mm with smallest inner diameter (5 x top roll) 9 mm with smallest inner diameter (1.5 x top roller) Bending performance data: 9 mm with smallest inside diameter ( 5 x top roller ) 7 mm for the smallest inside diameter (1.5 x top roller) Dodpfx Agetvn D Tekecd All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 structural steel ) Special accessories installed: Infinitely variable rolling speed: NC control:

Condition: ready for operation (used), total length: 3,620 mm, total width: 1,380 mm, total height: 1,250 mm, empty load weight: 5,000 kg, nominal power: 7.5 kW (10.20 HP), digitale uitlezing conische buiging Dodex Dd Htspfx Agkocd Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 2100 x 8/10 mm Roll dia upside: 190 mm Dia under roll - side rolls: 150 mm

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Dcjdpfx Agjx Ii Hvokjd Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Dcodpfx Agjw Hpzwsksd Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Year of construction: 2026, condition: new, Specifications: - Performance: 700 L/h (From 20°C to 80°C) - Electric demands: 1 kW, 230 V, 6 A, monophase - Heat performance: 80kW (diesel burner) - Fuel: diesel fuel - Fuel consumption: 7,5 L/h Dcodpfxofhb Ite Agked - Flue gas outlet: 110mm chimney - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750x1700x1170 mm - Weight: 380 kg - IP65 certified electronics - Heat exchanger: soft water - Connections: DN 25 - Thermometers: 2 pcs - With automatic by-pass valve - Automatic heat control, very easy to clean - Automatic operation - flowthrough type - With 4pcs vibration-free feet - It requires minimal maintenance Available options: Two filler superstructure: BB top 180 semi-automatic BiB filler, 6 head bottle filler, puffer tank with level switches

Condition: new, bending length: 2100sheet thickness: 6upper roll diameter: 160 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 4.600,-- - Automatic material extractor Dcodpod Ab Slefx Agkod - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: 20440067, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: DAVI GENIUS, number of rollers: 4, roller (bottom) diameter: 170 mm, roller (top) diameter: 200 mm, side roll diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 25 mm, working height: 700 mm, sheet thickness (max.): 14 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 4,000 kg, total length: 3,700 mm, total width: 1,050 mm, total height: 1,450 mm, power: 4 kW (5.44 HP), input voltage: 3,80,460 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, DAVI 4 ROLL 2000X10 MM MODEL MCB2020 _CNC GENIUS -YEAR 2004 MACHINE USED IN REGULAR WORKING CONDITION Capacity: -Width of plate: 2000 mm -plate rolling thickness 10 mm -plate pre-bending thickness 8 mm Rollers surface length 2050 mm upper roll 200 mm pinch roll 180 mm side rolls 150 mm Configuration installed: Surface hardening of the four rolls Conical bending hydraulic attachment - hardened pad. Central rollers powered driven rotation with gear unit & hydraulic motor individual Calibration system for re-rolling of welded shells rounding. Console electric centralized commands joysticks with screen readout CNC DAVI GENIUS Opening front side hydraulic drop-end to unload closed shells. Variable speed or rolling Safety installation with emergency stop. CNC controller Davi Genius , programmable for automatic plate roll. digital readout of the 4 roller on screen. Dimension 3700x1050 x H 1450 mm - weight 4 ton Voltage 380 / 415/440/480 Vac - Hz 50 / 60 Dcodpfx Agoyh Aqwoked User manual, service manual, cnc manual, with the machine

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm Dcedjx Sr Dfspfx Agked side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)