Section Bender
AKBEND APK 50

Name: AKBEND APK 50
Brand: AKBEND
Availability: InStock

Year of construction

2025

Condition

Ex-display machine

Location

Ahaus

Machine data

Machine type:: Section Bender

Manufacturer:: AKBEND

Model:: APK 50

Year of construction:: 2025

Condition:: as good as new (ex-display)

Price & Location

Location:: Ahaus

Call

Details about the offer

Listing ID:: A19924445

Reference number:: 1125-8404204

Update:: 16.09.2025

Description

I - beam section - flat steel 80 x 16 (d 1200) mm
I-beam section - upend 50 x 15 (d 1000) mm
L-beam 50 x 5 (d 1200) mm
round material 40.0 (d 800) mm
bar material dia. max. 70 x 2.0 (d 1600 ) mm
square material 80x30x3 (d 4000) mm
channels - flange UNP 80 (d 800 ) mm
bending speed 4.4 m/min
roll diam. toproll 157 mm
bore 50.0 mm
Ibedsxabr Sspfx Achoa
oil volume 18.0 Liter
total power requirement 1.1 kW
weight 485 kg
Exhibition machine from 2025
with only approx. 2x operating hours
Condition as NEW
Special price on request

Equipment:
- electro-hydraulic ring/profile bending machine
- hydraulic bottom/side roller adjustment
* for extra small bending radii
- bottom/side roller can be adjusted individually
- 3x driven rollers
- divided roller segments
- digital position display of the bottom/side rollers
* Display with touchscreen function
- hardened tool holder (42CrMo4)
- machine base
- 2x manually adjustable side guides
- horizontal and vertical work possible
- freely movable control panel
- pressure gauge / pressure display for the rollers
- CE mark / declaration of conformity
- operating instructions in German

Seller

Registered since: 2011

746 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

Wien

6,310 km

Pipe-Bending Machine
AKBENDAPK 50

Call

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm I-beam section - upend 50 x 15 mm roll diameter 157 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers Iodjyv Nk Rspfx Achjba - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German

See details

Listing

Plate Bending Machine - 4 Rolls FALKEN 4 R HMS 1550 x 150

Ahaus

7,000 km

Plate Bending Machine - 4 Rolls
FALKEN4 R HMS 1550 x 150

Call

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm Ibsdpfx Aexabkbechea total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

See details

Listing

Boxmeer

7,074 km

Ring & profile bending machine
SahinlerPK35

Call

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Capacity (kW): 1.5 Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Ibodpswt Sy Ajfx Achja Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

See details

Listing

Jib crane Abus overhead crane 15.050 mm x 12,5 ton

Beesd

7,126 km

Jib crane
Abusoverhead crane 15.050 mm x 12,5 ton

Call

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, overall weight: 5,770 kg, total length: 15,050 mm, load capacity: 12,500 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: double-girder – Capacity: 12,500 kg – Lifting height: 6 m – Year of manufacture: 2018 – Hoist type: steel wire rope – FEM/ISO hoist: 1Am / M4 Dimensions – Span: 15,050 mm centre-to-centre – Installation height: 970 mm – Width of wheel set incl. buffers: 3,370 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Total weight: 5,770 kg (of which trolley 846 kg) Speeds – Hoisting: 5/0.8 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Specifications – Control: Abus radio control, including spare transmitter – Crane manual available: yes – Dismantled: yes, available immediately – Hour meter: 306 hours (as of 26/6/2025) – Last service: 26 June 2025 Isdjy T Hfgjpfx Achoba – Condition: in very good condition, well maintained

See details

Listing

Lathe - cycle controled SEIGER SLZ 1200 x 6000

Germany

7,039 km

Lathe - cycle controled
SEIGERSLZ 1200 x 6000

Call

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1250 mm turning length: 6000 mm Iedpfx Ajyktvxochoba spindle bore: 130 mm Turning rate: 5 - 710 U/min. turning diameter over bed slide: 850 total power requirement: 37/52 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 12 x 4 x 2 m Teach In Controll HEIDENHAIN 1 fixed steady *

See details

Listing

Hergensweiler

6,797 km

Welding turn table
ProtecW 5000

Call

Listing

Babberich

7,060 km

Profile bending machine ROUNDO - R-4-S
RoundoR-4-S

Call

Listing

Treading machine ORT Italia - RT 10 ORT Italia RT 10

Babberich

7,060 km

Treading machine ORT Italia - RT 10
ORT ItaliaRT 10

Call

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Ibedpfxsx H Rmue Achea Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Coevorden

7,021 km

Laser cutting machine
AORETR12069 Tube + profile

Call

Condition: new, Year of construction: 2025, TR series is a laser pipe cutting machine focusing on heavy pipe processing, the use of traditional horizontal bed, high bearing capacity, with mobile gantry structure, can cope with a variety of complex cutting conditions, widely used in building beams, pipeline processing, steel structure industry. Iedpfx Acomxl S Ajhjba Big tube and profile laser cutting machine. Up to diameter H profile till 12 meter tube or profile lenght laser head depend on material thickness. Power: 3-12kW Max. Raw Material Length: 12500mm Round Tube Diameter: Φ70-Φ680mm Square Tube Side Length: □70*70-□480*480mm Max. Acceleration: 0.5G Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

See details

Listing

Wide belt sander BÜTFERING OPTIMAT SKO 213/ CC

Randers

6,829 km

Wide belt sander
BÜTFERINGOPTIMAT SKO 213/ CC

Call

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed Iedpfx Asvdtxiocheba - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

See details

Advertise here

Section BenderAKBEND APK 50

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Section Bender
AKBEND APK 50