Circular sawing machines

Altendorf F 45 Evo Drive

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm Dcedpfx Aew I Uxcobcon - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: new, Year of construction: 2023, functionality: fully functional, cutting width at rip fence: 1,300 mm, cutting height (max.): 204 mm, main saw diameter: 550 mm, height adjustment type: electric, table height: 910 mm, slide length: 3,200 mm, power: 5.5 kW (7.48 HP), Equipment: motor brake, rotational speed infinitely variable, Altendorf F45 EvoDrive Year of manufacture 2023, new machine - Template holder on the terminal - Extended cutting height, saw blade up to 550 mm, cutting height 204 mm - Motor 5.5 kW (7.5 HP) VARIO (infinitely variable speed control) - Preparation for 2-axis scoring saw - Table top extension 840 mm - Double roller carriage length 3200 mm Dcsdpfx Aovw S Hfebcsn - Angle miter stop - CNC parallel stop 1300 mm - Front support roller

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16-08-12-016, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, Equipment: rotational speed infinitely variable, Factory-reconditioned F45 with EvoDrive control & additional features!\n\nTECHNICAL DETAILS\n\nMax. cutting length: 3,000 mm\nCutting width at rip fence: 1,300 mm\nSaw blade diameter: 450 mm\nTable length: 840 mm\n\nMACHINE DETAILS\n\nMotor power: 5.5 kW\n\nFEATURES\nInfinitely variable speed control\nScoring unit\n2-axis scoring unit with tilting function\nRAPIDO for single-sided 2-axis scoring unit\nLED illumination on scoring unit\nDouble roller carriage, 3,000 mm length\nAngle stop 90° – 3,200 mm\nCNC rip fence\nSTEG/second support on double roller carriage\nLASER cut line indicator Dcjdpfexc Ub Ssx Abcen

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air. Dcjdjwf Hdgjpfx Abcon