Accessories and Others

Altendorf Typ DUPLEX

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Nedpsychqzefx Aikjda Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm Ndedpfxshlp D Ne Aikoa -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Nodpotrl R Aefx Aiksda Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads Ndsdpfx Asvwbg Ujikea 300 mm working width With 3 cutting heads, to make max 4 slats in one run New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: used, Year of construction: 2001, Technical description: Operating side: right Working height: 900 mm, adjustable: +/- 50 mm Nominal width: 1,400 mm Effective working width: Nominal width – 100 mm Transport: Smoothing roller Material of workpiece: Wood, wood-based material, inflexible Dimensions (min.) Thickness – Width – Length: 5 – 50 – 300 mm Njdobwc Dvopfx Aikeda Dimensions (max.) Thickness – Width – Length: 80 – 1300 – 2000 mm Tolerance max. across roller width: +/- 0.2 mm Total connected load: approx. 1.5 kW Mains voltage: 400 V / 50 Hz with a load-bearing neutral conductor Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar, max. 8 bar Weight: approx. 1,300 kg Machine without control cabinet, as it is integrated into the machine line!

Condition: used, planing width: 630 mm, total width: 1,100 mm, total height: 1,300 mm, overall weight: 1,200 kg, total length: 1,200 mm, planing height: 200 mm, space requirement height: 1,300 mm, space requirement length: 1,200 mm, space requirement width: 1,100 mm, No. 3249 Thickness planer Hombak D 63 Used Planing width 630 mm Planing height max. 200 mm Njdjx Ilzvepfx Aiksda 2-knife shaft Kickback protection Toothed infeed roller Smooth outfeed roller 2 feed speeds 9 / 18 m/min 2 height-adjustable rollers in the thicknessing table Knife setting gauge from Panhans Transport dimensions approx. 1200 x 1100 x 1300 mm LWH Weight approx. 1200 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 1987, Wide belt sanding machine Manufacturer: Samco Type: EG Ndjdpoxdnrgofx Aikoa Year of manufacture: 1987 Sanding length: 3,000 mm Includes spare belts ä3826

Condition: good (used), Code: 0060 Brand: SAOMAD Nedev Hqfxjpfx Aikjda Model: UTP 150/6 - CE Standard Tenoning machine for wooden frames, doors - CE Standard Technical data: Circular saw unit: Blade diameter mm 400 F30 - Motor Hp 4 - Cutting height mm 125 - Horizontal shifting mm 150 Cutterhead unit: Cutterheads lenght mm 150 - Max opening between cutterheads mm 185 - Cutterheads diameter mm 160 - Motor Hp 3 - Horizontal cutterheads adjustment shaft tenoning unit: Shaft diameter mm 35 - Useful working length mm 160 - Motor Hp 5,5 - Vertical and horizontal adjustment - Max tool diameter mm 320 Manual tilting tenoning carriage mm 600 x 600 Pneumatic workpiece holders Inclinable graduated fence +/- 45° Sliding safety guards N° 3 suction ports diameter mm 140 N° 1 suction port diameter mm 80 Compressed air 6 atm Overall dimensions mm 3550 x 1400 x 1600 h

Condition: new, Year of construction: 2025, COST CUTTING OPTIMIZER Superangle 600 is the ideal cutting center for angular and optimized cuts. A direct technological evolution of traditional cutting methods, Superangle 600 is able to increase productivity, guarantee maximum precision and maintain a simple and flexible process logic. EXTREMELY ROBUST Structure completely in thick and reinforced painted steel. Pusher support carriage mm. 300x345x25. Toothed belt width 50 mm. with 33 internal steel inserts. TECHNOLOGICALLY INNOVATIVE Electronic system consisting of a computer connected in real time to a latest-generation numerical control. Software in Windows environment. Complete with management of 5 qualities. 22” LED color video. Tele-service via internet. + Macro Excel. FAST Total optic system. Brushless electronic movement motor servo driver. Brushless electronic movement motor servo driver for angular cutting movement. Adjustable cutting speed. Two aligners. RELIABLE AND SAFE Transmission system with sliding on double tempered and ground guides. “Skf” ball bearing slides with double dust protection and automatic lubrication. Self-supporting electrical panel separated from the machine. Independent pneumatic adjustments to adapt to different types of processing. Ndsdpowk E Uusfx Aikja Maximum safety protection lock on the rear side.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 940x640x136 mm Nedpfsv A Hzbox Aikeda Weight 96 kg Total power requirement 1,5 kw