Shredder

AMIS Packbandshredder APS 15

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,600 kg, Year of construction: 2006, Eric Schomberg ES 60/120 Shredder in good condition for sale year of manufacture: 2006 Cutter width 600 mm Cutter length 1200 mm Hedpfx Ajtzbvyodwsfb Cutter shaft center distance 250 mm Cutter shaft speed approx. 16 rpm Cutter shaft torque approx. 17,000 Nm Filling hopper 1,200 mm x 2,400 mm Drive power 2 x 11 kW Total drive power 22 kW Weight 2,600 kg

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Hfodpfx Ajumubyodwsb Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Condition: reconditioned (used), functionality: fully functional, Rotary shear, twin-shaft shredder, Drive power: 110 kW (2 x 55 kW), Rated current: 210 amps Blade width: 75 mm Cutting unit size: length 1600 mm x width 980 mm Quick-change blade system, SEW gearbox, Including hydraulic pusher, hydraulic rated power: 7.5 kW, Control cabinet, Cutting unit overhauled, Dimensions: Length approx. 6150 mm x width approx. 3100 mm x height approx. 3150 mm, Hfjdewva Hiepfx Adwob Total weight: approx. 17 t

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 Hedsur Ravspfx Adwefb The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing

Year of construction: 2003, condition: excellent (used), 7x piece MOTAN Material container for dryer 200 LT Heating devices Year ca 2093 The tank has own Temperature reglet Hfedpfx Adefwx Ebowsb 8x pieces available Available 7X STK

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Hsdpfx Adet Ucqfewsfb Model: LV2020PFT Serial number: 099314 Year of production: 1994 Maximum capacity: 25,000 kg/h Bale outlet dimensions: 77 cm x 52 cm The baler is operational - it worked until the production line was extinguished. Recently there was a problem with automatic binding.

Year of construction: 2017, condition: ready for operation (used), Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Nominal output: 77kW, PCU output: 30kW, extruder output: 18.5kW, motor output: 10.7kW, heating zones: 1, heating output: 12kW. Documentation available. On-site inspection is possible. Hodpfx Ajwty Hksdwsfb

Condition: used, Year of manufacture 2003 2.2 kW 3.0 HP including documentation, COC Hsdpfxew Upn Ej Adwofb

Condition: used, Year of construction: 2006, operating hours: 54,050 h, pressing force: 80 t, filling opening width: 1,020 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,100 l, power: 94 kW (127.80 HP), empty load weight: 21,000 kg, Technical data baler: Manufacturer Paal Typ Konti 275 E Year of construction 2006 Hours of operation in total 54,050 hours Press power main press 80 tons at 300 bar Specific press capacity 9,7 kg/cm² Feed channel 1,600 x 1.020 mm (l x w) Throughput capacity under operating conditions 350 m³/hour Bale size 750 x 1,100 mm, length variable Driving motor 75 kW Connected load 94 kW Rated current 180 A Tying system 4-fold vertical, fully automatic Bale weight up to 750 kg, depends on material Volume hydraulic oil tank 2,100 l SPS controller (manuf., type) Siemens Simatic S7-300 Hsdpfjxcxm Eex Adwofb Operating panel (manuf., type) Siemens Multi Panel Transport dimensions only baler 11,152 x 2,152 x 3,000 mm (l x w x h) Machine weight baler approx. 21 tons Condition of the baler: The press and conveyor belt are in satisfactory working condition, see photo documentation. Further technical data and dimensions for the conveyor belt are not currently available. The plant is currently still in operation and is to be replaced by a larger press plant in the coming months. Scope of delivery: Bale press, bale chute, conveyor belt and machine documentation. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Dismantling and loading is the responsibility of the buyer. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, filling opening width: 1,250 mm, filling opening length: 1,000 mm, overall weight: 1,300 kg, Technical data: Funnel opening: length x width 1250x1000 mm Length x width 1250 x1000 mm Cutting unit opening: Length x width 562x462 mm Number of shafts: 4 Hfsdpfovuphuex Adwjb of which: cutting shafts 2 Number of cutting discs: 23 Speed of the shafts: 25 rpm.