Mill for sawdust

Bühler

Condition: good (used), functionality: fully functional, Food pellet crumbler / cracking mill. Produced in 80´s. In normal working condition In set goes factory refurbished mill roll packed. DOZD-84029-830 fluted roll 250x1250 hardness 480-530HB Klodsyahlyepfx Adwel 250 corrugation form 43 twist 12% Price includes packing and loading to buyers truck.

Condition: used, Year of construction: 1988, functionality: fully functional, Bühler animal food processing pelletpress. Bühler DPAA – 83017 Matritce inside dm = 520. Matritce working with 140 mm 110Kw- was working fine until demounting. Kedpfx Adsyahk Nowsll Available totally 2 sets. Coolers are missing- dust extraction included.

Year of construction: 2022, condition: used, Manufacturer : Buhler Haas-Mondomix B.V. Model: HAKA type VA-15L Year : 2022 Type : Foam / Aerator mixer Previous application : Application : Whipped cream Production capacity : 100 kg/hr nominal Input density : 1,0 kg/l Output density: 0.6 – 0.8 kg/l   Near as new condition. Unit consisting of : – Pre-mixer PCM 400 litres Capacity: 400 litres Design: conical bottom Lid with hinged access for manual loading of ingredients Jacketed, insulated and protected tank Stirrer: cutting blade + Teflon scrapers PT100 temperature sensor – HALA type dispensing pump with frequency converter Volumetric pump with frequency converter Jacketed design Mass flow meter with regulator – HAKA VA-15L type continuous aerator Rotor / stator with 912×5 mm square lugs Effective volume 2 ltrs Mixing head stator Double-walled front and rear plate for cooling Rotor designed for cooling Kljdpox R A Rtefx Adwsl Temperature sensors Jacketed piping 7.5 kW direct drive motor, frequency converter controlled Air injection: manual or automatic with mass flow meter Automatic pressure control and regulation Cabinet + PLC, Siemens S7 type – HANB cold water production unit Autonomous chilled water unit (thermoregulation) for cooling the expansion head tank Water temperature between 5°C-20°C Spiral heat exchanger / Centrifugal pump / Closed water tank – CIP Easy Clean system for easy cleaning Stainless steel platform supporting all equipment

Year of construction: 1998, condition: used, Manufacturer : Buhler Machine model: K60 Number: SRB 220 Year: 1998 Type: Bead mill / grinder with conical slot agitator.   Dynamic pressure compensation in the mixer Cooling system for stator, rotor and separation ring. Grinding chamber volume: 4.8 dm3 / 4.8 liters Klodsx R A Daopfx Adwsl Grinding chamber filling volume: 6.4 dm3 / 6.4 Litres Pressure system swept volume: 2.5 dm3 / 2.5 Litres Power rating: 30 kW Variable speed drive   Sold with progressive cavity pump PCM 2.6L10 Documentation available Product example : paints, pastes, …  

Condition: used, Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included. Klodpfex Ryu Nex Adwol Specifications: Power: 45 kW Style Blades: butterfly / tri-foil agitator

Condition: used, Used Buhler horizontal hammer mill. - Carbon steel rotor has diameter approximately 980 mm. Kodpfx Ajx Ryp Hedwell - Rotor is divided into 3 section. - Rotor has (8) shafts, each shaft is equipped with (10) swing hammers. - Rotor is driven by 75 kW, 380/660 V, 1480 rpm, 50 Hz electrical motor. - Includes number of spare screens and switchboard.

Condition: good (used), Year of construction: 2012, ITW BÜHLER WILSON HARDNESS TESTER SuperRockwell Hardness Testing Device Kedexnpvzopfx Adwjll BRIRO RK-Automatic Year of manufacture: 2012 Test height: 0-235 mm Throat depth: 145 mm with HM-Control evaluation system with RS-232 data interface for data transfer with settings for HR15N; HR30N; HR45N; HR15T; HR30T; HR45T used Weight: 150 kg

Condition: used, Year of construction: 1996, functionality: fully functional, total length: 2,050 mm, total width: 1,020 mm, total height: 2,820 mm, overall weight: 3,050 kg, rotational speed (max.): 1,480 rpm, Offered are two ball mills, model Cobra 751, from manufacturer Bühler. Both machines come together with a pre-mill (model SRK-690) from the same manufacturer. All machines are in used condition but are fully operational. All machines comply with up-to-date safety standards. An inspection of the machines is possible upon request and by appointment. Ksdpfx Aexldumodwell We are available for any further questions. The stated price is for one pre-mill and one ball mill together, not for all 4 machines!

Year of construction: 1998, condition: used, functionality: fully functional, machine/vehicle number: 10302038, Offered is a 3-roll mill from Bühler AG, year of manufacture 1998, and a press from geiger Maschinenbau AG, year of manufacture 2004. Both machines are in used condition and are currently not in operation. In terms of safety, the machines are up to the latest standards. Both machines are ready for operation. Klsdpfjxb Rc Asx Adwsl - 1300 mm roll width - max. 75 kW drive motor An inspection of the machines is possible upon request and by appointment. For further questions, we are at your disposal.

Condition: used, Buhler control cabinets Quantity: 2 units Type: MEAG See our other listings Kjdex Nzznepfx Adwsll VMA Wekerom