Veneer press BÜRKLE U 80 -used-

BÜRKLE U 80

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Gbjdpou Damdefx Anzjn

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Gsdpfxswka Ntj Anzjbn Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: excellent (used), Four side planer scm compact xl - planing width 23cm - planing height 13cm -electric lifting of the upper head and feed rollers Gedpfelat Hdox Anzobn - all spindles adjustable vertically and horizontally - bottom 4kW, right and left from one motor 7.5kw kW, upper 5.5kw universal 5.5kw Machine in very good condition

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Gbsdpfoug Ty Hex Anzsn Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: SÇ 5000 S ALÜMİNYUM PVC 3 EKSEN CNC FREZE MAKİNESİ, - Conforms to CE standards - It is a machine that can perform door, sash, arm barrel and triple drilling of aluminum and PVC profiles. - CNC control 10" touch screen - 3 independent axes (AXIS) - Cooling system for aluminum profiles - Metering system with right and left arm and rest - Precise operation thanks to linear slide system - Ability to adjust the speed settings of all processes - Easy switching from touch screen to Aluminum Pvc profile and automatic change of speed settings - Unlimited memory capacity - Automatic protection cover for safety Gjdpfsra Nybsx Anzebn - Servo motor system in X, Y, Z axener

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Godovu Hgbspfx Anzsbn Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm Godpfxjqpdkcj Anzobn - Capacity: about 7,500 - 15,000 dowels/hour

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor Gsdpsmb U Tusfx Anzjbn • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: used, Year of construction: 1991, Plate size: 3600 x 1350 mm Total pressing force: 160 t Specific pressing force: 3.5 - 5.0 kg/cm² Operating pressure max.: 320 bar Pressure cylinders: 8 x 90 St/DM mm Opening width: 400 mm Weight approx. 8300 kg Dimensions: 4130 x 1520 x 2150 mm Gedpfxjy Hrzmj Anzjbn Functionally tested = new top plates (gold anodized) Location: Nattheim

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Working width 230mm Working height 160mm Head arrangement: Bottom 5.5kw Right 4kw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads Gbjdpfx Anerb An Uszen CE certificate Year of production 2003