Used veneer presses for sale (19)

Condition: used, Year of construction: 1983, Max. press length: 2500 mm Max. press width: 1250 mm Total pressing force: 80 t Specific pressing force: 2.5 kg/cm² Press opening width: 400 mm Dcedpfxozkl Tbs Angjk Heating plate material: standard aluminum Operation: button control Swivel button: Yes Number of pressure pistons: 4 Safety edge strip: Yes Condition of heating plate: good Weight: 3800 kg Dimensions: 2850 x 1410 x 2000 mm Storage location: Nattheim

Condition: used, total length: 3,800 mm, total width: 1,650 mm, total height: 2,400 mm, Colour: Green Empty weight: 3.500 kg - Details: - └ Description: The plates need to be repaired - Documentation available: No - CE certificate present: No - Main motor power [kW]: 2.2 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 450 - Total stroke [mm]: 450 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Top/bottom separately heated: Yes - Voltage [V]: 400 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 3800mm x 1650mm x 2400mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dedpfxeztc R Ae Angsck Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 3,950 mm, total width: 1,500 mm, total height: 2,150 mm, Colour: Green Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Serial number: 19198 - Main motor power [kW]: 1.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3100 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 390 - Total stroke [mm]: 390 - Number of work zones [pcs]: 3 - Number of levels [pcs]: 3 - Plate material: Wood Dodpfx Ansy Rq Efjgock - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 80 - Total pressure [Ton]: 160 - Options: Disable partial cylinders - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3950mm x 1500mm x 2150mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1996, pressing force: 14 t, This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. • Plate dimensions: 2550 x 1350 mm • Heating: Hot water heating • Number of pressure cylinders: 6 • Total pressing force: 135 t Dedpeztgf Dofx Angsck

Condition: ready for operation (used), Year of construction: 1996, pressing force: 14 t, This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Dsdpex D E Avefx Angjck • Plate dimensions: 2550 x 1350 mm • Heating: Hot water heating • Number of pressure cylinders: 6 • Total pressing force: 135 t

Condition: used, Year of construction: 1972, Second-hand machine Year of manufacture: 1972 Dodpfx Ajzk N U Nongsck Features and technical specifications: - Pressing surface 2500 x 1100 mm - Total pressing force: 650 kN - Opening width: 400 mm - Number/diameter of cylinders: 4/80 mm - Operating pressure: 325 bar - Closing time: approx. 16 sec. - Panel type: aluminium / natural - Thickness: approx. 51 mm - Power rating per heating plate: approx. 6.8 kW - Heating-up time to 90°C: approx. 16 mins. - Dimensions: 2900 x 1300 x 2050 mm - Weight: approx. 2,900 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2013, Second-hand machine Year of manufacture: 2013 Features and technical specifications: - clearly laid-out controls - ideal working height - large opening - Full access on all four sides - Push-button control - Stop button - Safety cable - Emergency stop at every point - Timer with audible signal - Automatic pressure switch - automatic temperature control system - infinitely variable stroke limitation - heavy-duty rack-and-pinion compensation - Energy-saving circuit as standard - side cylinders can be deactivated - Total pressing force: 120 tonnes - Panel dimensions: 3000 x 1350 mm - Number of cylinders: 6 - Piston diameter: 85 mm - Max. opening / stroke: 400 mm - Closing time: approx. 16 sec - Heating time to 80°C (from room temperature): approx. 14 mins Dsdpfx Anezk N Shogock - Maximum permissible operating temperature: 140 °C - Total power rating: 20.1 kW - Hydraulic power: 1.21 kW - Fuse rating: 35 A - Dimensions: 3500 x 1610 x 2000 mm - Total weight: 6,200 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Second-hand machine Features and technical specifications: - Pressing area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tonnes - Configuration: 1 stage - Heating plates: gold-anodised ELKOM energy-saving plates - Opening width: 350 mm - Rated power: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Dcedpfx Aezk Nyxongok Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2026, total length: 4,000 mm, total width: 2,100 mm, total height: 2,050 mm, Colour: White Empty weight: 4.020 kg - Year: 2026 - Documentation available: Yes - └ Type Documentation: Technical data, Electrical diagrams, User manual - └ Language: EN - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: Yes - Main motor power [kW]: 2.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 400 - Total stroke [mm]: 400 - Number of work zones [pcs]: 1 Djdpezkr Tbefx Angeck - Number of levels [pcs]: 1 - Plate material: Assembled panel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Total pressure [Ton]: 70 - Working pressure [kg/cm²]: 2 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Transport dimensions: 4000mm x 2100mm x 2050mm (l x w x h) - Transport weight [kg]: 4020kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, Hot platen press Brand: OMC Type: PL 90s New machine Technical data Plate size: 3000 x 1300 mm Stroke: 400 mm Stroke type: Upward stroke (from bottom to top) Plate type: Elkom electronic plates Press force: 90 tons on 80% of the surface Press cylinder: 6 x Ø 70 mm Specific pressure: 2.05 kg/cm² on 100% of the surface, 2.56 kg/cm² on 80% of the surface Loading and unloading side: 3000 mm Heating system: Electronic 25.4 kW, maximum temperature of 120°C Automatic opening with timer Control panel: Standard Connection: 400 V, 50 Hz, 3 ph Safety device: Safety cable around the entire press Emergency button Two-hand operation CE standard Press structure The press structure is made of composite and welded steel. The structure of both the fixed and moving platen is made of composite and welded steel. The press is equipped with a rack and pinion guide system to ensure perfect parallel movement during the closing/opening of the plates. Elkom heating plate Elkom electric plates with electric resistors The plates consist of a chipboard on which an aluminum sheet with the electric resistors is mounted. Dcjdpeyalmbefx Angjk Maximum working temperature 120°C. Maximum thrust = 7 kg/cm² Hydraulic system - The hydraulic system consists of a two-stage unit with submersible pump to reduce noise and lubricate the rotating parts. - Pump for fast closing/opening (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). - 2 HP electric motor - The hydraulic unit is equipped with the following control/safety valves installed on the tank: - Maximum pressure valve: prevents excessive pressure in the hydraulic system in the event of an electrical or electronic control fault - Pressure retention valve (check valve) - Valve for low drain pressure (pre-drain valve). It prevents dangerous shocks within the system. - Oil drain magnetic valve Control panel and electrical system The pressing parameters can be set on the control panel, which is equipped with the following switches/meters: - 2 temperature regulators for setting the plate temperature - Pressure gauge for pressure regulation with automatic pressure equalization system - General on/off switch - Two manual safety buttons for closing the press - Timer for automatic opening - Switch to select manual or automatic opening of the platens after the work cycle . - Off/on switch for upper and lower platen resistance Safety systems - Timed bimanual control for closing the press - Safety rope on the four sides of the press - Platen lock for maintenance - Protective guards for the pinion and rack units - Safety stickers and warning notices - Operating and maintenance manual - The press complies with CE standards Optional: Touchscreen display - Programmable logic controller 7-inch color touchscreen display specially developed for setting the following parameters - temperatures - pressing time - Daily setting of the heating system - automatic switch-off of the heating system when the set temperature is reached and automatic temperature recovery - new system for automatic pressure setting - Possibility to save historical data/parameters - Diagnostic system Sensor for checking the plate parallel stroke Anodized (anodized) surface on the 2 plates Electrical exclusion of 2 cylinders + sensors for parallel control Mylar film on panels Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top)

Condition: used, Year of construction: 1999, machine/vehicle number: H 40, functionality: fully functional, total length: 2,200 mm, total width: 1,100 mm, total height: 1,800 mm, temperature: 120 °C, Veneer press 2200 x 1100 mm with heating, press pressure via hand pump. Dcsdpfx Anoyuva Uegok

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,700 kg, Shelf length: 3000 mm Shelf width: 1300 mm Hot water heating system Two daylight openings 6 hydraulic cylinders Cylinder diameter: 85 mm Djdpfx Aezgf Uwjngeck Emergency safety pull-cord switch Timed press opening Daylight opening: 400 mm total / 2 × 180 mm Year of manufacture: 2006

Condition: ready for operation (used), Veneer press with 30 floors Size of press plates 3000 x 1650 mm Hydraulically operated. Hot water for heating In-feed system and out-feed system included Dcsdpfx Ajyh A E Uengsk

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, operating hours: 5,000 h, pressing force: 200 t, table width: 1,400 mm, table length: 3,200 mm, total length: 3,200 mm, total width: 1,400 mm, total height: 2,900 mm, overall weight: 23,000 kg, operating temperature: 200 °C, workpiece height (max.): 150 mm, temperature: 210 °C, For sale is a virtually new veneer press with an infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of manufacture 1992). The machine is in excellent condition and has seen very little use. Machine type: Continuous press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of manufacture: 1992 Location: 57223 Kreuztal Dodpfewnpcdjx Angjck Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Infeed: yes Conveyor belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Clearance height: approx. 100 mm Preheating temperature: 200° Heating capacity: 45 kW Heating medium: oil Pressing force: 200 tons The press machine is in top condition, has seen very little use, and has been used exclusively for development projects for the past 15 years. I would be happy to send you more information and pictures upon request. The machine is available immediately and can be inspected at any time by appointment. Self-collection only! Functional video available upon request. If you are interested, I am happy to provide you with further information or arrange a viewing!

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 3/1406, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, Veneer press, Joh. Langzauner & Sons Djdpfx Anoy Twrkogsck ----- Technical data ----- Pressing area: 2,550 mm x 1,300 mm, Power per heating plate: 7,200 W, Number of cylinders: 4 pcs.

Condition: like new (used), Year of construction: 2004, working width 2700 mm working height 100 mm hydraulic cutting gauge adjustment to size cast body power supply 400V 3000 kg Dcodpfxsxcn Dts Angok Year of manufacture 2004

Condition: like new (used), shelf length: 3500 mm shelf width: 1300 mm shelves made of stainless steel pistons and seals replaced number of pistons: 10 Dcsdpfxeyfr T Ej Angek piston diameter: 85 mm water heating weight: 6100 kg

Condition: ready for operation (used), Year of construction: 2019, This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine. Dcjdpfx Anjx U Tv Ijgjk Machine Benefits Technical Machine Benefits • For connection to existing heating system / pressing temperature up to 90°c / the fabricated steel platen can take a maximum pressure of 5kg/cm²Plate: 110 X 240 cm, 120T, 5kg/cm2

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4712, functionality: fully functional, pressing force: 120 t, number of cylinders: 6, cylinder diameter: 90 mm, pressing speed: 200 mm/s, TECHNICAL DETAILS Maximum pressure: 120 t Pressing area dimensions: 2,500 x 1,300 mm Pressing height: 200 mm Number of cylinders: 6 Cylinder diameter: 90 mm Dcodpfxsyuxh Is Angsk Pressing speed: 12 m/min EQUIPMENT Complete line with: Loading system Gluing machine Destacker High-frequency cabinet (offered separately)