Wide belt sander

BÜTFERING ECO 2 RC 1100

Condition: used, Year of construction: 2000, Used feeder Year of manufacture: 2000 Suitable for Kündig Uniq edge sanding machine Technical specifications: Max. reach: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Ljdpfx Asumpp Eskferk Roller width: 60 mm Spring travel of rollers: 25 mm Speed settings: 8 (2/4/5.5/6.5/11/13/16.5/33 m/min) Motor power: 0.75 kW Connection: 400V/50 Hz Weight: 32.5 kg The console shown in the picture is not included in the scope of delivery! Location: Flörsheim Availability: Immediately

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Lrjdpsb Auu Rjfx Akfok Engine power: 0,75 KW Voltage: 230 Volt 5 amps, 50 Hz, Machine no.: 4/14242 Dust bag Location: Ex warehouse Bitburg

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Ljdpfsfxpbmex Akfork

Condition: like new (used), Log circular saw, for diameter until 1100mm Lrjdoi Ek Hpopfx Akfek

Condition: excellent (used), Wide belt 1100 mm, 2 belt roller, sanding pad, only 3280 hours, top section adjustment Lrjdpfxexbntfe Akfjk

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: completely checked + serviced, incl. new feed belt Features and technical specifications: - Incl. combination unit with contact roller and sanding shoe - With height-adjustable contact roller for calibration - With air-cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With a rotating cleaning brush at the machine's outfeed side - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of the lateral belt position for even belt wear - With roller table at infeed - With digital display unit for the electric motor-driven workpiece thickness adjustment - With additional veneer sanding beam - With 2x spare sanding shoes - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - Extraction connection 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Lrsdpfswka T Sox Akfek Weight: approx. 2300 kg Pictures show the machine in unrefurbished condition! Availability: approx. end of January 2026 Location: Röllbach

Condition: good (used), Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm -Projection: 380 mm -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm Lrodpfxer Ngp Ue Akfsk -Weight: 1262 kg

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad Lrodpjw R Hh Ujfx Akfek - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: excellent (used), Sawblade tiltable 45 ° Length of the rolling table 3.200 mm cutting width 1.250 mm Ledpoyq Ab Djfx Akfsrk Motor output 5,5 kW Saw blade diameter 350 mm Scoring unit 0,75 kW Altendorf type F45 Elmo sliding table saw for precise rip, cross and mitre cuts in solid wood, panel materials and coated materials. The machine enables precise and repeatable cuts thanks to the smooth-running sliding carriage, motorized adjustment (Elmo), scoring unit and stable cast construction. Ideal for joineries, furniture construction and interior fittings.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pneumatic press for edge-gluing wood panels. Ledsyivr Hjpfx Akfork TECHFA type PTD 6000 Max. dimensions of glued elements: - length: 6300 mm - width: 160 mm - height: 850 mm Press is divided into 4 sections.