CNC mortising unit

Benz. CAVO-V Fitschenaggregat

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Dcedpfx Ast Hagnoddor Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Dodpfju N Skfjx Addscr Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8

Condition: used, Working width 1350 mm Number of sanding units 2 st. Workpiece thickness max. 160 mm sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS Dedpjrmucxjfx Addscr

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Dsdpfsh E Sghox Addecr Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available

Condition: used, Year of construction: 2019, Used machine Year of construction: 2019 Equipment and technical data: - Designed for classic nesting processing with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry design traveling column Dcodpewkbbdjfx Addor - Helical rack and pinion drive in X and Y directions; ball screw drive in Z direction for precise positioning - Processing dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. traverse paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm grid - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Rotation direction: clockwise/counter-clockwise alternately - n(max): 1000 - 4400 rpm infinitely variable - Holder: M10 thread – 11 mm fit - Without tools and holders - 6 horizontal spindles: - 2 double drilling spindles in X direction - 1 double drilling spindle in Y direction - Holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from mounting end - Without tools and holders - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm infinitely variable - Max. power at 12000 to 24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety guard according to CE standard - Safety fencing at sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety via light barriers in the front machine area - Handheld control unit for remote operation with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license comprising: - CAMPUS NC-HOPS: - Graphic variant system with dialog programming and CAD/CAM functions for creating part variants with macro technique - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust protection by overpressure in each guide carriage - Simultaneous lubrication for all linear ... (text evidently continues)

Condition: good (used), Year of construction: 2002, operating hours: 5,900 h, functionality: fully functional, machine/vehicle number: 74343, working width: 1,350 mm, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, Bütfering Optimat SBC 313 wide belt sander, already dismantled and stored on site Wide belt sander Year of manufacture: 2002 Model: Optimat SBC 313/QCE/Classic - with 3 units (description available in the photo) - top sanding Dcjdpeqvl D Hsfx Addor Working width: 1350 mm Abrasive belt width: 1370 mm Abrasive belt length: 2620 mm Cross belt width: 150 mm Cross belt length: 4700 mm Further details can be found in the photos

Year of construction: 2008, condition: good (used), Industrial stainless stell humidifier , steam generator Dcsdpfjfl Iquox Addor Outdoor unit 4x8 kw heating wire 32kW 160 ° C max

Year of construction: 2006, condition: excellent (used), machine/vehicle number: W144, Technical data: Dodpfxjp Artdj Addscr 1 Demag KBK column slewing crane NL 50 KG Payload at full radius 50 KG payload Height: approx. 3.8m, UK boom: approx. 3.3m Projection: approx. 5m, hook height: approx. 2.95 m Weight completely approx. 300KG with 125Kg steel ST chain hoist with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Test book is available Very good condition, see pictures Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment

Condition: used, machine/vehicle number: 007826, X axis working area: 5600 mm Y axis working area: 1200 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 17 Total number of tool changer positions: 12 Dsdpfx Aewgkt Ueddscr

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. Dsdpju S N R Eofx Addecr - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50