Biesse Rover 27

Biesse Rover 27

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 94464, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 155 mm Number of work zones: 2 Drilling Head Vertical spindles X-axis: 10 Vertical spindles Y-axis: 12 Horizontal spindles X-axis: 6 Horizontal spindles Y-axis: 2 MACHINE DETAILS Electrical Data Power: 20 kW Voltage: 380 V Current: 25 A Frequency: 50 Hz EQUIPMENT Vertical electrospindle with C-axis vector, automatic tool changer, ISO 30 taper Automatic tool change system with 3 side-mounted positions for aggregates Automatic tool change system with 20 positions and chain 8 manually adjustable bars for suction cup holders with display 3 manually adjustable suction cups per bar 8 pneumatically actuated Bakelite bars for panel lifting Iaedpjxx Rz Tefx Adwjl Perimeter safety fence Motorized conveyor belt for chip extraction Vacuum pump

Condition: used, Year of construction: 2010, Used machine Isdpfx Asw I H Rkodwsal Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: used, machine/vehicle number: 008131, Max. panel width: 4400 mm Max. panel length: 4400 mm Main saw blade projection: 75 mm Iajdpew Idh Hjfx Adwjl No of Grippers: 7

Condition: excellent (used), Motor power 1.2 HP, 400 V, 50 Hz Speed 2800 rpm Drilling table size 650 x 330 mm Cross adjustment 300 mm Depth adjustment 150 mm Height adjustment 170 mm Iedpfx Aovzramjdwoal Table height 880 mm Weight approx. 280 kg

Year of construction: 2002, condition: ready for operation (used), Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible. Iedpfx Adsn Tpm Hswjal

Year of construction: 1999, condition: repair required (used), machine/vehicle number: AL 1 / 99, Connection 9,0 kW 400 V Compressed air connection 6 bar suction 1x160 mm 3400 m³/h 30 m/sec Compressed air consumption 200 NL/min drilling spindles 9 pcs / 3000 rpm Iodpfx Aeiiy E Todwoal grooving spindle 1 pc / 6000 rpm milling spindle 1 pc / 16000 rpm LxWxH 4050 x 2050 x 1900 mm weight approx. 1500 kg max. plate thickness 55 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Iaedjxvz T Ispfx Adwel Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last service by Homag in 11/2024) Features and technical data: Iajdpfx Ajwx Aaqsdwjl - Workpiece thickness min.: 12 mm - Workpiece thickness max.: 60 mm - Workpiece min. (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) - Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) - Feed speed: steplessly adjustable 18–25 m/min (frequency-controlled) - Gluing system: EVA hot-melt adhesive - Glue application (tank / cartridge / nozzle): Melting unit with granulate hopper - Glue volume / cartridge size: Granulate hopper, melting capacity 18–35 kg/h, level-controlled - Heating time: approx. 8–10 min - Edge magazine (positions): 2 coils (automatic coil change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure section: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: FK13 profile milling unit, automatic 8-position tool changer (R = 2 mm) - Bevel / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in FA11 finishing unit - Jointing unit: KAL310/A20/S2 jointing milling unit, 2 × 3 kW - Workpiece pre-heating: available - Release agent spray device: top / bottom, type 2929 (F.01) - Extraction nozzles: multiple Ø 100 mm (individual extraction per unit) - Control system: power control PC22 (industrial PC, woodCommander running Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant per EU directive 98/37/EC Dimensions / required floor space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg Please note: The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania

Condition: good (used), CNC Machining Center for Drilling and Milling Operations on Wood Panels, Derived Materials, Plastics, and Non-Ferrous Alloys Precise and highly reliable thanks to high-quality components, this machine is ideal for both craftsmen and industrial manufacturers aiming to increase flexibility and production quality. The main structure is made of a single welded steel base frame, constructed with thick-gauge steel plates. TECHNICAL SPECIFICATIONS • Working area X - Y - Z: 6,170 x 1,380 x 180 mm • Axis stroke X - Y - Z: 6,635 - 1,780 - 250 mm • Axis speed X - Y - Z: 100 - 100 - 30 m/min • Worktable: 10 bars • Bar carriages: 3 • Vacuum modules: 3 per bar • Pendulum processing up to: 2,975 mm • Two independent work zones allow simultaneous processing of two identical, mirrored, or different parts • Lifting device for easy positioning of heavy and large panels • 5-sided machining capability • "C-shaped" open frame structure • HSD routing unit • Air cooling system • Inverter included • Tool magazine: 1 with 10 positions • Drilling unit: • Vertical drilling spindles: X = 7, Y = 7 • Horizontal drilling spindles: X = 2+2, Y = 1+1 • Integrated saw blade: Ø 120 mm • Control system: NC 500 based on PC • Easy programming and file import • Remote control panel/console • Teleservice and video diagnostics for real-time support • Automatic guide lubrication system • Vacuum pumps: 2 x 100 m³/h • Chip conveyor belt • Centralized extraction duct • Extraction ports: 1 x Ø 250 mm • Safety devices: • Side protective curtains for the working unit • Perimeter safety guards with access door • Total installed power: 25 kW • Compressed air consumption: 400 NI/min • Operating pressure: 6.5 / 7.5 bar Iajdpfxotuxa He Adwel • Air consumption for extraction: 3,816 m³/h • Machine dimensions: 8,300 x 4,020 x 2,730 mm (h) • Machine weight: 4,100 kg + 600 kg (electrical cabinet) • Included documentation: user and maintenance manual, software manual, spare parts catalog, electrical diagram, CE declaration of conformity.

Condition: ready for operation (used), Technical characteristics Machining X 3180, Y 1340 Drilling capacity X 3405, Y 1260 Pneumatic locking HSK63 12 KW 3-axis electro-chuck Ijdpfotqka Tjx Adwoal Displacement 0-100 m / min 0-90 ° blade grooving group 14-pin vertical drilling unit, 6-pin horizontal, 15-inch screen control cabinet included SOFT and control Machine to be restarted Nombre de ventouses12 Nombre de poutres6 Caractéristiques usinageVacuum pump Capacité pompe à vide100 m3/h Power and Motors Overall dimensions