Tube Laser Cutting System

BLM LT 8

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Ksdpfxsylp Sls Afdsnb Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 X-path: 745 mm Y-path: 370 mm Kjdpfsqgcdtox Afdenb Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Dimensions: 185x180x235 cm LxWxH

Year of construction: 2015, condition: new, Vertical furnace height: 1100mm Kedpscdi D Djfx Afdonb useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, type of input current: three-phase, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Knedpfx Aextau Esfdjb Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm

Condition: new, Year of construction: 2024, The Durma HD-TC 60220 pipe laser stands for maximum precision and efficiency in the processing of pipe materials. With its impressive maximum pipe diameter of Ø220 mm and the ability to cut both square profiles of 160 x 160 mm and rectangular profiles of 200 x 100 mm, this pipe laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the ability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects that require fast production with consistently high quality. The minimum material length for automatic loading is 3000 mm, which further increases the efficiency of the machine and reduces processing time. Max. Tube diameter: Ø220 mm Laser power: 3 kW Max. Dimensions of the square profile: 160 x 160 mm Max. Dimensions of the rectangular profile: 200 x 100 mm Min. pipe diameter: 20 mm (12 mm with manual loading) Max. Tube diameter for automatic loading: Ø170 mm Max. Profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. Material length: 6500 mm Min. material length for automatic loading: 3000 mm Length of the last piece: 4000 / 6000 mm Unloading length: 150 mm Max. Material weight per meter: 52 kg/m Max. Material weight (total length): 340 kg Max. Loaded weight: 3000 kg Profile types: Round, Square, Rectangular, Elliptical Kedpfx Ajq Tpkyjfdjnb Types of open profiles: L, U

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Knedpfx Aem Twnlofdeb Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w X/Y-axis positioning accuracy: 0.05mm X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, installing in place, greatly reducing installation time. 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. 3. Rectangular Tube Welded Bed Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. Knedpfxjg Rgt Us Afdjb 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 441 h, machine/vehicle number: LCG3015AJ, laser hours: 228 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 2 mm, table length: 3,070 mm, table width: 1,550 mm, travel distance Z-axis: 100 mm, type of cooling: water, compressed air connection: 6 bar, overall weight: 9,300 kg, total length: 10,136 mm, total width: 2,840 mm, total height: 2,432 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, The machine is in as-new condition. It is connected to power; test cuts are possible. Nozzle changer: 8 stations. Knjdpfox Tft Aex Afdob

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 Knedpfxsu Dw I Ee Afdjb The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: new, Year of construction: 2025, TR series is a laser pipe cutting machine focusing on heavy pipe processing, the use of traditional horizontal bed, high bearing capacity, with mobile gantry structure, can cope with a variety of complex cutting conditions, widely used in building beams, pipeline processing, steel structure industry. Ksdomxl S Aspfx Afdonb Big tube and profile laser cutting machine. Up to diameter H profile till 12 meter tube or profile lenght laser head depend on material thickness. Power: 3-12kW Max. Raw Material Length: 12500mm Round Tube Diameter: Φ70-Φ680mm Square Tube Side Length: □70*70-□480*480mm Max. Acceleration: 0.5G Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands