Edgebander

BRANDT AMBITION 1440

Condition: like new (used), Year of construction: 2011, machine/vehicle number: 0-261-04-5736, functionality: fully functional, operating hours: 806 h, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, feed rate X-axis: 11 m/min, total length: 5,700 mm, Equipment: documentation/manual, Brandt AMBITION 1440 KDF Year of manufacture: 2011 Nkedpfsylvpqox Ag Nou Year of commissioning: 2013 In very good condition

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Njdsxyiiljpfx Ag Nsku Storage location: Nattheim

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Nsdpfxjyg H Hij Ag Neku Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: good (used), Year of construction: 2018, 0,4 - 6 mm Njdpsx I Sgrsfx Ag Njku Workingpiece thickness from to 8-60 mm Total length 3960 mm Feed speed 10 m/min. Weight 1055 kg

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 2459, functionality: fully functional, Machine in very good condition - Very user-friendly control panel - Minimum workpiece width approx. 80 mm - Minimum workpiece length approx. 200 mm - Feed rate approx. 10 m/min - Transport chain with firmly bolted special chain plates - Double roller top pressure - Machine length 4,300 mm - Machine width 1,400 mm - Weight approx. 1,250 kg - Extendable workpiece support at the front - Automatic central lubrication for cross-cut saw & corner milling unit - Melt glue container with Teflon coating (very low maintenance) - Ready for operation after approx. 5-6 minutes - Jointing unit - Pneumatic trim roller cutter - Direct glue application to the workpiece - Trimming unit for front & rear edges - Flush/chamfer/radius milling unit - Corner rounding - Surface scraper with dual sensing Nksdpox Ahmusfx Ag Neu

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Application Types Edge Banding Nksdpsx D Rklsfx Ag Neu

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area Njdsyfn Urspfx Ag Nsku fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: used, Year of construction: 2010, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, edge thickness (max.): 10 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total length: 4,500 mm, total width: 1,200 mm, Max. edge thickness: 10 mm Max. panel thickness: 60 mm Max. roll material thickness: 3 mm Max. feed speed: 12 m/min Manual height adjustment Granulate glue system: glue pot below Quick-change glue pot: Yes Strip magazine: Yes Jointing milling unit: Yes Cut-off saw unit: 2 motors Flush/radius trimming Scraper unit: profile scraper, flat scraper, Yes Buffing unit: Yes Nksdpjw Av E Isfx Ag Nou Version: right-hand machine Machine dimensions: approx. 4,500 mm x 1,200 mm Control: FORMAT 4 E-MOTION Price plus VAT Machine is still in operation and can be tested at any time.

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Nedpfx Agjyf I T Ue Noku Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale: edge banding machine Brand O KDF 530 C. Fully functional, in operation, regularly serviced. Available for collection from 03/2026. Nedpeyg H Nksfx Ag Noku