Edgebander

Brandt KDF 670

Condition: ready for operation (used), Year of construction: 2003, Brandt Edge Banding Machine Type: Profi KDF 670 Single-sided edge banding machine in right-hand configuration suitable for craftsmanship, for hot-melt adhesive application. Quick-change gluing module for processing PU glue granulate in compliance with adhesive processing regulations. Infrared hot-melt glue activation Automatic edge magazine for coil material for thick PVC/ABS Heavy-duty pressure zone Centrally adjustable top pressure Operating panel at machine infeed PC 16 electronic control Technical Data: Edge thickness: 0.4 - 8 mm Roll cut, max. 3 x 45 mm or 0.8 x 60 mm Workpiece thickness: 8 - 55 mm Feed rate: max. approx. 14 m/min Tool set R = 2 mm (exchangeable for R = 3 mm) Quickmelt gluing module Motor-driven height adjustment for top pressure - PC 16 Adjustable infeed fence Program-controlled adjustment for infeed fence Additional unit for laminate overhang Program-controlled pressure zone Release agent application for workpiece Jointing milling unit Jointing cutter set, Dia End trimming unit with chamfer/straight cut 0 - 15 degrees Pneumatic adjustment for end trimming unit, chamfer/straight Flush milling unit Pneumatic adjustment for milling unit Pneumatic two-point adjustment for vertical tracing rollers Jointing unit 0 - 25 degrees, synchronous flush milling Radius cutter set (exchangeable for chamfer cutter) Program adjustment for edge thickness Pneumatic adjustment for side tracing rollers Profile milling unit above and below - For profiling/flush trimming of end edges on post- and softforming parts and corner rounding of thick PVC edges. / Wood edges possible to a limited extent Scraper with quick-change heads Pneumatic adjustment for scraper Flat scraper glue joint Gedpfxex Nrtnj Ah Hebg Cleaning agent application for workpiece Buffing unit, 2 motors Electrical and mechanical preparation of the edge banding machine for integration of Ligmatech workpiece return conveyors ZHR01/ZHR02/ZHR15 Weight: 3000 kg Total connected load: 15 kW Length: 5880 mm Location: ex-site customer - Immediately available - System must be dismantled by the buyer

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Gedpfx Ahowka Nys Hobg Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 2600 kg Measurements height 2300 mm Gbedpjx E Eggefx Ah Hog Dimensions Machine Length 6060 mm This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. Application Types Edge Banding

Condition: used, Year of construction: 2008, POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid wood edge thickness (mm) 12 Feed speed 20 m/min Manual infeed guide Pre-trimming unit EVA glue application and pre-melting unit Edge holder plate End trimming unit Two-motor overlapping trimming unit Two-motor staggered chamfering unit with NC adjustments Two-motor rounding unit Edge scraper unit Glue scraper unit Brush unit Godew Db Rfepfx Ah Hjbg

Condition: used, machine/vehicle number: 008131, Max. panel width: 4400 mm Max. panel length: 4400 mm Main saw blade projection: 75 mm Gbsdpfx Aew Idh Hoh Hog No of Grippers: 7

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Gbsdjxvz T Iepfx Ah Hsg Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 22.198, input frequency: 50 Hz, Showroom model Fully CNC-controlled edge bander, very comprehensively equipped: Pre-milling unit Gluing unit Front and rear cut-off saw unit Fine milling unit (top and bottom) Corner rounding unit (front and rear) Radius scraper unit Additional options available: Infeed roller for 2 types of edge bands, including solid up to 5 mm. R-8 N glue scraper unit. PC 19” touch screen (new). CNC-controlled infeed guide. Pre-milling unit with 65 mm high diamond tools. Pneumatic on/off. Infrared lamp at infeed. Universal feed rule. Antistatic at infeed (type Riepe) Anti-adhesive unit after the milling unit (type Riepe) Cleaning unit at outfeed (type Riepe) LED in the cabin. WiFi Kit unit. LED motion system. Duo Melt EVA/PUR glue unit. Nesting for panels with hinge holes. Automatic chain lubrication. Gsdpsw Ufuhjfx Ah Hsbg

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last service by Homag in 11/2024) Features and technical data: - Workpiece thickness min.: 12 mm - Workpiece thickness max.: 60 mm - Workpiece min. (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) - Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) - Feed speed: steplessly adjustable 18–25 m/min (frequency-controlled) - Gluing system: EVA hot-melt adhesive - Glue application (tank / cartridge / nozzle): Melting unit with granulate hopper Gbodpfxswx Aaqo Ah Heg - Glue volume / cartridge size: Granulate hopper, melting capacity 18–35 kg/h, level-controlled - Heating time: approx. 8–10 min - Edge magazine (positions): 2 coils (automatic coil change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure section: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: FK13 profile milling unit, automatic 8-position tool changer (R = 2 mm) - Bevel / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in FA11 finishing unit - Jointing unit: KAL310/A20/S2 jointing milling unit, 2 × 3 kW - Workpiece pre-heating: available - Release agent spray device: top / bottom, type 2929 (F.01) - Extraction nozzles: multiple Ø 100 mm (individual extraction per unit) - Control system: power control PC22 (industrial PC, woodCommander running Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant per EU directive 98/37/EC Dimensions / required floor space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg Please note: The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers Gjdpfx Ahev H D S So Hjbg finished cutting saws top-bottom milling unit 2 x finishing unit profile scraper flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Gbjdpjwka N Tofx Ah Hsg Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice