Laser cutting machine

Bystronic Bylaser 4400

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: SIEMENS, controller model: SIEMENS 840D, laser power: 4,400 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 170 mm, feed rate X-axis: 80,000 m/min, feed rate Y-axis: 80,000 m/min, overall weight: 20,000 kg, total length: 12,000 mm, total width: 6,000 mm, total height: 6,500 mm, Laser cutter BYSTRONIC - ByLaser 4400 MACH-ID 9635 Make: BYSTRONIC Type: ByLaser 4400 Control: SIEMENS 840D Year: 2010 BYSTRONIC BYTRANS Loading arms with change position BYSTRONIC BYTOWER Plate storrage  Change Table foir in and out feed manipulation Dust collector 5.0 inch cutting head 7.5 inch cutting head Under power insopections possible ! Ppjdpfx Aney U Httotet Working area X Axis: 3048mm Working area Y Axis: 1524mm Working area Z axis: 170mm Table Length: 3000mm Table Width: 1500mm Power resonator: 4.4kW / Amp Feed rate X-Axis: 80000mm/min. Feed rate Y-Axis: 80000mm/min. Sheet master loading arm:Yes, BYTRANS Sheet tower storage: Tes, BYTOWER Dust collector: Yes Cutting hours: 26000H Length: 12000mm Width: 6000mm Height: 6500mm Weight: 20000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. Ppedpfx Anjrq D Nistet The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 26,000 h, machine/vehicle number: R1011250, laser power: 4,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 170 mm, workpiece weight (max.): 890 kg, Laser source and frequency converter have been renewed! TECHNICAL DETAILS Working Area and Cutting Area Nominal plate size X: 3,000 mm Nominal plate size Y: 1,500 mm Cutting area X-axis: 3,048 mm Cutting area Y-axis: 1,524 mm Cutting head Z-lift: 170 mm Workpiece weight: max. 890 kg Dynamics and Accuracy Positioning deviation: ±0.1 mm Positioning scatter: ±0.05 mm Edge detection accuracy: ±0.5 mm Positioning speed X/Y-axis (axial parallel): max. 80 m/min Positioning speed X/Y-axis (simultaneous): max. 113 m/min Axis acceleration: max. 4.5 m/s² Laser Source Laser power: 4,400 W Laser source: Bylaser 4400 Possible laser sources: Bylaser 3000 / Bylaser 4400 / Bylaser 5200 ARC / Bylaser 6000 MACHINE DETAILS Dimensions and required space Transport system standard height: 3,650 mm Transport system height to magazine: 4,350 mm Material trolley length: 3,000 mm Additional length for extension magnet: 200 mm Material trolley width: 1,600 mm Material trolley height without plate stack: 917 mm Standard lifting height: 550 mm Lifting height to magazine: 1,150 mm Lifting height with stacked tables: 800 mm Transport data and weights Travel unit with lifting unit: 1,300 kg Vacuum gripper frame with double fork system: 1,200 kg PLC cabinet: 500 kg Material trolley: 800 kg Total transport weight ByTrans 3015: 3,800 kg Equipment and Features Vacuum gripper frame plate thickness (loading): max. 25 mm Vacuum gripper frame plate weight (loading): max. 900 kg Number of vacuum grippers: 42 Weight per gripper: max. 45 kg Compressed air: 6 bar Vacuum: -0.6 bar Double fork system plate thickness (unloading): max. 25 mm Double fork system plate weight (unloading): max. 900 kg Fork travel path: 2 x 790 mm Cutting hours: 26,000 h EQUIPMENT ByTrans 3015 Extended Bylaser 4400 Shuttle table Loading arm Integrated 4th rotary axis Vacuum gripper frame Loading unit with suction gripper frame Double fork system Material trolley Vacuum pump Plate separator Double sheet detection Cassette trolley Pedsy Rt Ezspfx Antjpt Air conditioning Control cabinet with signal lamp and emergency stop Safety fence Photoelectric sensors ByTower storage system

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 8,736 h, machine/vehicle number: R1419193, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, controller model: P8005A, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 4400, laser hours: 8,736 h, laser power: 4,400 W, laser wavelength: 10 nm, A Bystronic laser source (ByLaser 4400) is offered for sale. Maintenance, including repairs, has been carried out by Bystronic. The operating hours are subject to change, as the machine, including the laser source, is in daily use. Delivery will be arranged after consultation and can be done by the buyer dismantling the machine themselves. Parts can also be sold individually as spare parts. The laser source was installed in 2024. Ppjdpfey Rzi Ujx Antet

Condition: used, Year of construction: 2006, pressure 100 t chamfer lenght 3100 mm distance between columns 2550 mm column arm 400 mm table height 925 mm stroke 200 mm control Cybelec DNC 8805 output 11 kw total connected load 15 kW weight of the machine ca. 9,0 t range L-W-H 5,2 x 2,1 x 2,9 m Used CNC- press brake - some upper tooling (no lover tooling) - Infrared security device - documentation - hydraulic Crowning - 2 axis backgauge X + R Psdsw Rf Hispfx Antept

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 35,509 h, machine/vehicle number: R1119022, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, controller model: P8005A, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 4400, laser hours: 35,509 h, laser power: 4,400 W, laser wavelength: 10 nm, Offered is a laser source from Bystronic (ByLaser 4400). All maintenance and repairs were performed by Bystronic. Operating hours may change as the machine including the laser source is in daily operation. Handover is by arrangement, dismantling is the buyer's responsibility. Parts can also be sold individually as spare part donors. Pjdey Rzg Topfx Antjpt

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, stroke length: 300 mm, operating speed: 90 mm/s, throat depth: 1,000 mm, total length: 4,520 mm, total width: 1,900 mm, total height: 2,950 mm, overall weight: 15,000 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Lenze, controller model: 9300, working width: 4,520 mm, bending force (max.): 150 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 2,900 mm, distance between stands: 3,200 mm, installation height: 950 mm, control type: CNC control, back gauge adjustment: CNC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, Safan press brakes are reputable sheet metal working machines from the Dutch manufacturer, well recognized in the market. Pedpfex Ewnpex Antept The SAFAN E-Brake series is equipped with electric drives, which have been successfully implemented in our machines for almost 30 years. Currently, the largest model of electrically driven presses is available with a capacity of up to 300 tons and features a patented design by the manufacturer. Lenze motors and servomotors, controlled by long-life inverters, enable fast and reliable operation of the system for many thousands of operating hours. Thanks to its innovative drive, the machine uses electrical energy primarily during the downward movement of the ram and the bending process. The return of the ram is achieved by the force of springs mounted on both sides of the machine. Additionally, during idle periods, the machine consumes virtually no electricity, as the system does not include a hydraulic pump motor maintaining pressure, as is the case with hydraulic presses. Energy consumption is estimated to be up to 70% lower compared to conventional hydraulic presses. Furthermore, the electric drive is insensitive to temperature fluctuations that may occur in production halls. The machine performs excellently in both long and short production runs. Safan E-Brake 150-3100, model year 2007 - Safan TS 1 controller - 2D bending system - 13” color touchscreen - Control panel on a movable arm - CNC-controlled Y1/Y2 axis - CNC-controlled X axis - CNC-controlled R axis - CNC-controlled Z1 + Z2 axis - Wila upper tool adapter (mechanical clamp) - Safan OBS/3 lower tool table (compatible with Wila and Promecam tools) - Lightguard safety system with upper beam descent control - Work area lighting at the front and rear of the machine - Electrical installation: 3/N/PE 50 Hz 400/230 V - Opening: 690 mm - Table length: 3060 mm - Distance between machine frames: 3300 mm

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Ppedpfxjxzf Dzo Antst Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Used hydraulic press brake Manufacturer: Hämmerle Model: 200-3100 Year of manufacture: 1995 Ppsdjyklwnepfx Antet The machine is supplied with numerous tools (press brake knives).

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressing force: 135 t, stroke length: 400 mm, operating speed: 200 mm/s, oil tank capacity: 150 l, overall weight: 9,500 kg, travel distance X-axis: 625 mm, controller manufacturer: ESA, controller model: ESA S550N, working width: 3,050 mm, bending force (max.): 135 t, back gauge speed R-axis: 50 mm/s, back gauge travel distance R-axis: 180 mm, back gauge travel distance Z-axis: 2,100 mm, control type: CNC control, degree of automation: automatic, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, A very well-equipped machine with Y1 / Y2 / X / X1 / R / Z1 / Z2 axes and hydraulic upper and lower tool clamping. The control unit has just been overhauled by the manufacturer, and the machine works flawlessly. Ppedpfx Aewqhw Eontot