Wide belt sander

Casadei LIBRA

Condition: used, Year of construction: 2020, Working width 1100mm Width of the belts 1115 mm Development of 1900mm bands Working height min max 4/170mm Steel inlet roller - rubber roller - steel outlet roller Finishing skate Probe a panel Gkodex A D Arepfx Ah Dof Main engine power 11kw-15hp Motor power drive 0,4kw-0,7cv Two drive speeds 4.5/9m/min Voltage 380 V

Condition: excellent (used), Year of construction: 2020, Compact wide-belt sanding machine with combination sanding unit With special offer equipment – Top condition – Special offer equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard with diagonal-grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front side Robust tube-reinforced monoblock steel machine body, robot-welded, with work units positioned high up for maximum rigidity Motorized table height adjustment with digital display Electronically controlled sanding belt oscillation Feed carpet driven by gear motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning per unit with decimal correction possible for grit/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonal-grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Connection for extraction Extraction port diameter 140 mm Electrical data Connection voltage 400V Current type AC Phases 3Ph Line frequency 50Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Gkjdpfx Ajxac E Heh Djf Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically read out height: digital electronic control: Fox 500 KTR aggregates: 1 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no motor power: 7,5 kW suction connection: 140 mm machine length: 1388 mm Gsdpjknyhlefx Ah Dekf machine width: 1545 mm machine height: 1668 mm weight: 660 kg

Condition: new, Year of construction: 2022, I sell the new widebelt sanding machine Casadei Libra 45 RCT 110 Year 2022. Configuration: Steel moulding cylinder with spiral knives Combi unit hard rubber cylinder + segmented pneumatic jumping pad. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm Gkedpfx Ahorddh Is Def 1 Motor 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Air-blow for cleaning the sanding band. Condition NEW ! The machine was not working before. Available immediately. Including full documentation and CE.

Condition: new, Year of construction: 2022, machine/vehicle number: MR004406, Wide belt sander with a maximum working width of 950 mm. The maximum working height of this machine is 170 mm. Price is ready to use, provided with cord and hine is equipped with the following options: - Machine in accordance with CE regulations - Activate calibration roller via switch on control panel - Activate sanding shoe via switch on control panel - Automatic table positioning with thickness sensor - Automatic centering of feed carpet Technical specifications: - Number of sanding units: 1 - Sanding unit 1 type: Combi calibrating sanding shoe - Maximum sanding width: 950 mm - Maximum working height: 170 mm - Minimum working height: 4 mm - Feed speed: 4.5/9 /min - Sanding belt length: 1,525 mm - Sanding belt width: 970 mm Gkedpfel Dxgyex Ah Djf - Motor power: 10 hp - Serial number: AB00024845

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AB00021322, total width: 1,820 mm, total height: 1,960 mm, total length: 1,650 mm, working width: 1,100 mm, overall weight: 1,160 kg, power: 11 kW (14.96 HP), grinding belt length: 1,900 mm, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, input voltage: 400 V, - The calibrating and fine sanding machine LIBRA 35 is an extremely versatile machine suitable for a wide range of applications. - Robust, tube-reinforced monoblock steel frame with high-mounted working units for maximum rigidity. - User-friendly due to a clearly arranged control panel on the front side. - Motorized table height adjustment. - Digital display for working height. Gkodpfewwkuysx Ah Dof - Electronically controlled sanding belt oscillation with reduced compressed air requirement. - Automatic star-delta start-up for the main motor. - Natural rubber feed belt with negative profile. - Feed table with two rollers at the infeed and outfeed of the feed belt. - Belt feed driven by geared motor with two speeds. - Flexible steel pressure bar before the first unit. - Rubber pressure rollers before and after each working unit. - Pneumatic belt tensioning per unit with decimal correction option for grit/band thickness.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total width: 2,000 mm, total height: 2,070 mm, total length: 1,800 mm, grinding width: 1,350 mm, power: 11 kW (14.96 HP), grinding belt length: 2,150 mm, grinding belt width: 1,370 mm, extraction nozzle diameter: 200 mm, power of feed motor: 800 W, input voltage: 400 V, Slight signs of wear from demonstration. The LIBRA 45 is characterized by a rich range of standard equipment, a very robust construction (both the base frame and the work units), sanding shoes with a larger contact surface and modern control systems Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start-up Natural rubber feed carpet with negative profile Automatic carpet centering Support table with rollers at the inlet and outlet of the feed carpet Large sanding roller diameter 140 mm Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of and behind each work unit Pneumatic belt tension for each unit with decimal correction option for grain size/belt thickness Equipment: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with electronic system Rubber-coated grooved pressure roller at the inlet 1° position with Backflow protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Extraction connection Extraction nozzle diameter 2 x 200 mm Electrical data Power of height adjustment motor 0.25 kW Power of feed motor 0.8 kW Power of drive motor 11 kW Connection voltage 400 V Mains frequency 50 Hz Grinding unit Grinding belt length 2150 mm Grinding belt width 1370 mm Gedpfx Ahovxu E Ho Dskf Grinding width max. 1350 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Height min. 4 mm Height max. 170 mm

Condition: as good as new (ex-display), Year of construction: 2025, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Gedpjgf Sw Nofx Ah Djkf Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: new, Year of construction: 2023, working width: 1100 mm min. workpiece height: 4 mm Gkedpfeirmg Ujx Ah Dof max. workpiece height: 170 mm height adjustment: electrically workpiece thickness display: digital aggregates: 2 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller Link grinding shoe: elastic, sector distance 56 Electronic control: FOX 500 KTR dust brush: no motor power: 15 kW suction connection: 2 x 140 mm machine length: 1650 mm machine width: 1820 mm machine height: 1960 mm weight: 1170 kg

Condition: new, Year of construction: 2025, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Gedpfx Aocr S Ecsh Djkf Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price