Machining center

DAHLIH MCV-720

Condition: used, Year of construction: 2005, A 2005 Built The Dah Lih MCV 720 Fanuc controlled VMC in lovely condition, super clean and well maintained…fitted with 4th axis unit, rear exiting swarf auger & mist extractor Make: Dah Lih Model: MCV 720 YOM 2005 Control Fanuc Series 0i Table Size (L x W) 950 mm x 560 mm (approx. 37.4 x 22.05 in) Axis Travel (X/Y/Z) 720 mm / 460 mm / 510 mm (approx. 28.3 / 18.1 / 20.1 in) Max. Table Load 500 kg (approx. 1100 lbs) Bwsdpfjxxv E Rjx Agxjw Spindle Taper BT 40 Spindle Speed 8,000 RPM Spindle Motor Power 11 kW (15 hp) Automatic Tool Changer 24 Tool Side Mount Machine Weight Approx. 4400 kg (approx. 9680 lbs) Control: Fanuc 0iM Spec: Travel X720 Y460 Z510 mm | 8000RPM | BT40 Accessories: 4th axis unit, Mist Extractor, Swarf auger

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis Bwodpjvtrc Sofx Agxsw 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 74,617 h, functionality: fully functional, controller manufacturer: Fanuc, controller model: Fanuc i0, Dah Li MCV 720, fully functional. One owner only. Bwjdeykk Apepfx Agxow

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB Bwsdsyuqacjpfx Agxsw IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Bwodpfjuqmvksx Agxjw Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Bwedpfx Aetylazjgxsw Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Lighting Coolant system Enclosed guarding

Condition: good (used), Year of construction: 2004, HSK 63 18.000 rpm Parts shown by hand not come. Bwedpfx Agoznmifexew

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 350 mm, turning diameter: 550 mm, spindle bore: 66 mm, spindle motor power: 15 W, chuck outer diameter: 201 mm, bar diameter (max.): 66 mm, collet bore: 66 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-T, Equipment: documentation/manual, TURRET POSITIONS: 12 PARTS CATCHER TAILSTOCK CHIP CONVEYOR Bwedpfx Agsygidkjxow

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3467, Country of manufacture: Switzerland Net weight: 3000 kg Customs tariff number: 8458.11 20 Dimensions: 215 x 150 x 215 cm TECHNICAL SPECIFICATIONS (standard) Headstock (Z1 axis) (+C optional) Maximum bar capacity: dia. 20 mm Maximum part length depending on type of guide bush: 200 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum spindle power: 3.7 (5.5) kW Tool holder (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes): 2 x 5 Tool section: 16 x 16 mm Number of cross drilling/milling stations on turret: 4 Programmable rotational speed: 0–8,000 rpm End working attachment (X3/Y3) Maximum number of end working tools: 4 Programmable rotational speed: 0–8,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C optional) Maximum clamping diameter: 20 mm Bwjdpfxew Uczxs Agxsw Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum number of secondary operations: 7 Number of fixed or rotating spindles: 7 Maximum spindle speed: 8,000 rpm Tornos-Bechler/Fanuc dedicated CNC Processor type: 486 DX2 Number of simultaneous axes: all All technical data are provided without guarantee and subject to change and error.

Condition: excellent (used), DOOSAN PUMA 700LMB FANUC 21i-TB (2006) CNC LATHE WITH POWER TOOLS AND “C” AXIS Z-3000 MAIN FEATURES: Bodpfxo Af Il Dj Agxoww -CNC FANUC 21i - TB 10.4” LCD Color Manual Guide -Swing over bed: 1,030mm -Swing over carriage: 800mm -Max. Turning diameter: 900mm -Max. Turning length: 3,200mm -Bar capacity: 164mm (ASA-A1-15) -Turning spindle: 45kw 1,500 Rpm -Gearbox -Motorized turret: 12 stations -Powered tools: 11Kw 3,000Rpm EQUIPMENT INCLUDED: -Hydraulic chuck SMW type KNCS diameter 630mm -C-axis 360 (0.001º) -Automatic tool pre-setter -Integrated tailstock -High-pressure pump 70 Bar Hydracell -Chip conveyor -Hydraulic steady rest ATLING (100-420mm)* -Tool holder set including 4 powered tool holders (2 Straight – 2 Angled)* CONDITION: Machine in Excellent Condition. Available for inspection in working order. Immediate delivery.