Tool milling machine

DECKEL FP 1

Condition: used, tool adaptor 88 length 560 mm center height of top slides 65 mm weight 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is Ffedpov Dxzcofx Afpju 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m².

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Ffodpfsxgdr Ijx Afpeu

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc. Ffodsvvnfujpfx Afpeu

Condition: excellent (used), Year of construction: 2000, Machine-Details: Stock-No. 1022-2416 Fsdoyhdbmjpfx Afpofu Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 1 Year of manufacture 2000 Type of control conventional Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information: The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Fsdpfoh Sptnex Afpofu Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: good (used), Internal article no.: 26022 Ffjdpoxxkwnefx Afpeu Universal milling machine Deckel FP1 + Accessories (machine vice / dividing attachment / SK40 tool holders / tailstock) An M16 drawbar is installed in the milling head + Additionally, S20x2 drawbar The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Fedjyg I Nfspfx Afpofu Swivel table: 600 x 210 mm, max. load 200 kg

Condition: good (used), Please read the technical specifications in full. If you are considering the machine as an investment, we kindly request your complete identification, including a valid telephone number and email address, in order to provide you with an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of the milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speed vertical/horizontal: 40 – 2,000 rpm Number of gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z-axis: 1200 mm/min Feed Y-axis: manual Fixed angular table: 600 x 210 mm Swivelling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data are not binding! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed backwards. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z axis - The machine underwent partial overhaul by a specialist company several years ago. Equipment: - 3-axis HEIDENHAIN digital readout - Micro-cooling spray unit - Fixed angular table - Chip tray - Machine lamp Fsdpfexyc Tkjx Afpofu - Machine feet Further accessories available upon request! Condition: good to very good, from training workshop Available from March 2026

Condition: ready for operation (used), Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible. Fedpfsx Hz Rkjx Afpofu

Condition: ready for operation (used), Max. rotational speed: 2000/min, with instruction manual. Fsdpfx Afelbmtgjpsfu

Condition: used, x-travel 390 mm y-travel 200 mm z-travel 390 mm table-size 775 x 330 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 2000 U/min quill stroke 40 mm total power requirement 2,2 kW weight of the machine ca. 1,4 t dimensions 1,75 x 1,5 x 1,8 m Universal Milling Machine - Digital Display - Chip Guard - Coolant System - Machine Light - Chip Tray - Machine Feet Ffedpexfb Hgjfx Afpou - Operating Instructions

Year of construction: 1986, condition: ready for operation (used), A universal tool milling machine Deckel from the 1980s is available. Travel X/Y/Z: 300mm/160mm/340mm, table dimensions X/Y: 600mm/250mm, max. table load: 150kg, tool interface: SK40, speed: 2000rpm, feed rate: 1200mm/min, machine dimensions X/Y/Z: approx. 1200mm/1100mm/1500mm, weight: approx. 700kg. On-site inspection is possible. Ffedpjygmcwsfx Afpju

Condition: good (used), Year of construction: 1985, Taxed according to the differential taxation scheme under §25a of the German Value Added Tax Act. You will receive a proper invoice. Internal item no.: 26006 You are welcome to inspect the machine under power in our heated warehouse area of over 500m². Universal milling machine Deckel FP1 (3-axis active digital) Year of manufacture: 1985 Travel distances: X300 / Y160 / Z340 mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: infinitely variable 5-500 mm/min The control system works perfectly, but the LEDs are defective! + Hydraulic machine vice Röhm BB110 Ffodpoygv Upefx Afpju The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Fsdpfxexnniaj Afpjfu Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: reconditioned (used), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete credentials, including a valid phone number and email address, in order to provide an offer. Deckel FP1 AKTIV (3-axis active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment features: Fodpoxpwfgofx Afpofu - Heidenhain 3-axis active digital readout, type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Quill stroke on vertical milling head: 60 mm - Vertical milling head swivels and can be extended horizontally by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry check videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring distance 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring distance 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital readout overhauled - Set of wipers installed - LED indicators for digital readout replaced - Oil change - Vertical milling head newly mounted - Oil sight glass replaced Price quoted is net, ex-stock, loaded.