Tool milling machine

deckel FP 1

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Ledpfx Anor U St Uj Ijad Weight: 770 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: SN1744271, Overheadcrane ± 11.550 mm x 5.000 kg Ledpfx Ajv Ipvxsn Ioad

Condition: used, Univ. universal tool milling machine DECKEL, type FP 1 Machine no. 52185, year of manufacture 1968 Travel distances: X: 300 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 250 mm Spindle mount: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-shifting Power connection: 380 volts, 50 Hz - Feed in the X and Z axes Lsdpfxsdzqb Sj An Isad - Two motor speeds and 8 gear stages - Quill travel on the vertical milling head: 60 mm - Fixed tilting table - Coolant system in the machine base - Adjacent control cabinet - Counter holder with counter bearing for horizontal milling, SK 40 Space requirement L x W x H: 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Laodpfx Anjiy Ekvj Isd Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 Lodpfemhfrrjx An Isad with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Lsdpjghtvaofx An Ijad Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Lasdpjznn Hrjfx An Ijd Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill Lodpfx Anerb A Tcj Isad electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Ledpjxcbl Dsfx An Ioad Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm Ljdpfer D T U Dex An Ioad - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Ljdpfx Asxmurrjn Ioad

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 33064, Year of manufacture approx. 1960, overhauled in 2012 Travel distances: X: 300 mm, Y: 150 mm, Z: 330 mm Table size: 600 x 210 mm Spindle mount: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power connection: 380 Volts, 50 Hz - Feed in the X and Y axes - Quill movement on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Adjacent control cabinet with cable plug connection Space required L x W x H: 1100 x 900 x 1600 mm Lsdpfxsdzp T Ej An Isad Weight: approx. 900 kg Good condition Machine was overhauled in 2012.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display K&C, stepless feed, light gray color, CE compliant, in excellent condition. Technical data: >> Year of manufacture 1980, machine number 2101-1423 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system >> Machine lamp >> Operating manual, parts list >> Tool holders, vise, backstop Ljdpfx Aezl Uz Den Isad About the machine: Offered is a universal milling machine Deckel FP1, CE compliant, in very good condition. The machine has very little backlash and all spindles move easily. The bellows are all new. In this newer FP1 model, the feed is steplessly adjustable on two axes, and the machine also has a rapid traverse function. An oil change has been carried out. Mechanically and electrically inspected. Thanks to the new digital display from K&C, working with the machine is easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered on.

Condition: good (used), Year of construction: 1993, machine/vehicle number: 28794, Offer 24419 Technical data: Lasdpfx Ansuk D I Rj Ied - Roller diameter 520 mm - projection 510 mm - max. passage height 420 mm - Table size 750 x 800 mm - Table swivels left + right 15 / 30 ° - Table height from floor 1020 mm - Saw blade length 4120 - 4200 mm - saw blade width 20 - 25 mm - infinitely variable cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welding unit in the machine stand - Grinding stone - Shears + air pump - lighting

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and continuously variable feed, in very good condition, CE compliant. Technical data: >> Year of manufacture: 1987, Machine No. 2102-3562 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 3 axes >> Rapid traverse in 3 axes Lodpfx Anszl Eife Ijad >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel ranges X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list >> Tool holders, vise, counter holder About the machine: Offered is a universal milling machine Deckel FP1 in very good condition and CE compliant. The machine has very little backlash and all spindles can be moved easily. Even at maximum speeds, the milling machine runs very smoothly. In this newer FP1 model, the feed is continuously adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.