Universal Milling Machine

SIXIS

Condition: good (used), UNIVERSAL MILLING MACHINE "SIXIS" S-103 spindle head ISO 30, standard fix table with 7 T-slots Manufacturing origin CH Custom position 8459.6930 TECHNICAL DATA Table travel Longitudinal by hand and automatic 450 or 300 mm 1 Handwheel turn 4 mm 1 division at nonius 2/100 mm Vertical by hand and automatic 400 mm 1 handwheel turn 2 mm 1 division at nonius 2/100 mm Automatic feeds Longitudinal = 8 possibilities 12-19-30-45-63-96-150-216 mm/min Vertical = possibilities 6-9,5-15-22,5-31,5-48-75-108 mm/min Rapid feeds Rapid travel by front pedal Horizontal 1000 mm/min Vertical 500 mm/min Headstock Travel in the axial way of arbor only by hand 175 mm 1 handweel turn 4 mm 1 division at nonius 2/100 mm Spindle speeds controlled by pulleys and gearbox a.spindle motor 1400 min-1 9 speed scales 60-90-130-175-265-390-530-800 et 1200 min-1 b.spindle motor 2800 min-1 9 speed scales 120-180-260-350-780-1060-1600 et 2400 min-1 c.2-speeds spindle motor 18 speeds – above scales a. and b. Kdodpod Aly Aefx Ab Hjr Spindle taper ISO 30 or ISO 40 errors and omissions excepted-data given without obligation Inventory Nr.2170110, machine’s accessories list : 1 vertical milling head ISO 30 1 standard fix table with 7 T-slots 4 short mill-fittings ISO 30 1 collet holder ISO30/E32 2 reduction sleeves MT2+MT3 1 boring head ISO 30 3 mills 1 stay

Condition: new, Brand new stainless steel container Article number: 10846 Volume: 550 L Type: Standing on a plastic pallet Material (in contact with the media): Stainless steel V2A / AISI 304 Number of fixings: Plastic pallet Bottom: Dished bottom Max. operating pressure: Atmospheric Container dimensions: Inner diameter: 815mm Outer diameter: 890mm Total height: 1330mm Cylindrical height: 1070mm Total width: 890mm Materials: Inside: 14301 / AISI 304 Kjdsv Dunfjpfx Ab Hjdr Outside parts: 14301 / AISI 304 Facilities: Nameplate: no Outlet diameter: 50mm Distance from drain to floor: 160mm

Condition: new, functionality: fully functional, machine/vehicle number: 07, UNIVERSAL MILLING MACHINE "SIXIS" TYPE S1101 with simple table 300 x 120 mm (201) and vertical milling support (211) Machine is new 4 machines on stock new Manufacturing number 07 Manufacturing origin Swiss TECHNICAL DATA Feeds : longitudinal 150 mm transverse 100 mm vertical 150 mm Drive Motor 2800 rpm 0,33 HP Spindle speeds with gearbox rpm. 125-250-500-1000-2000-4000 External diameter of quill 55 mm Takes collets W-12 BENCH TYPE : Kodob Axrmepfx Ab Hedr Net weight 58 kg CABINET TYPE : Net weight 110 kg errors and omissions excepted data given without obligation

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 Kdodpfx Abjuhbxao Hjr - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 Ksdsirax Uepfx Ab Hodr -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: ready for operation (used), Year of construction: 1964, functionality: fully functional, machine/vehicle number: 16079, three-jaw chuck diameter: 250 mm, Used conventional lathe DLZ 502 The spindle, lead screw, cross slide, and top slide should be replaced. The bed ways are still in very good condition. Accessories: Like-new 3-jaw chuck with boring and soft jaws Faceplate D = 500 mm, various tool holders, centers, steady rest Machine dimensions: Width = 1.1 m x Length = 2.8 m x Height = 1.25 m Weight approx. 1.5 tons Kdodpfx Aszlkyieb Her Drive power 5.5 kW

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Kjdeu Rni Hjpfx Ab Hedr Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base Kdsdeghtvajpfx Ab Hsr - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05 Ksdpfx Abswuuc Ao Hedr

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Kdsdpfx Aex S Rcmeb Her