Tool cutter

DECKEL FP3

Condition: used, x-travel 500 mm y-travel 300 mm z-travel 400 mm digital readout Heidenhain spindle tunring speed 2.500 U/min tool taper SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Includes various accessories. Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically noted in the additional information. Dedpfx Adsx Edvqsdscr Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, As-new DMG CTX 1250 TC 2nd Generation Siemens 840 sl Operate 21.5" Ergoline Djdpsx Ah Edsfx Addocr 5-axis simultaneous machining Counter spindle ISM 76 synchronized 48 tool positions HSK 63A DIN 69893 Year of manufacture: 2019 Low operating hours (see photo) Max. turning diameter: 500 mm Max. turning length: 1200 mm Draw tube internal max. 77 mm main spindle Further technical specifications in PDF Blum TC 60 touch probe Bar feeder interface Turning/milling spindle with increased speed 20,000 rpm 19/22 kW Scraper-type chip conveyor incl. coolant tank 600 l 8 bar/20 l/min Centrotex clamping system incl. accessories. The machine is available immediately.

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines Djdpshvz Iisfx Addscr FP1 -FP2-FP3-FP4 Single sale demand inquiries.

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Dedpfx Ajh Rv U Eeddecr Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: good (used), Year of construction: 1991, 1 used universal tool milling machine Manufacturer: Deckel Type: FP 1 with Heidenhain active digital readout Year of manufacture: 1991 Technical specifications: X-travel: 300 mm Y-travel: 160 mm Z-travel: 340 mm Spindle taper: SK 40 Vertical quill stroke: 60 mm Dcodpfx Asw Sdmdsdder Table size: 600x210 mm Spindle speeds: 40–2000 rpm Machine weight approx.: 1 t Connected load: 7.5 kW Space requirement approx.: 1.6x1.3x1.8 m equipped with fixed table swivelling table universal dividing head various tool holders horizontal support

Condition: used, Year of construction: 1987, - Lid Contour 3 CNC control - Sliding vertical milling head with extendable spindle - counter bearing for long milling arbors - Hydraulic tool clamp - Automatic speed gearbox - Automatic clamping in X/Y/Z axes - Automatic central lubrication - coolant device - direct path measurement - Collision protection clutch in Z/Y axes - year of construction 1987 Technical data Working range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Vertical quill stroke: 80 mm - Vertical milling head can be moved on headstock: 150 mm Main drive: - Motor: pole-changing three-phase AC brake motor and manual gearbox with clockwise/anticlockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Step change: 1.25 - Tool holder: SK40 (M16) Dcodpsu Awlzefx Addsr - Tool clamp: hydraulic Feed drive: - X-axis: 1 DC motor - Y- and Z-axis: 1 DC motor - All axes: ball screws - Feed speed programmable: 10 - 1000 mm/min - Rapid traverse X-/Y-/Z-axis: 2000 mm/min Universal table: - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore Ø/depth: 63H6 / 8 - Distance from table center to screw-on surface: 260 mm - Max. Passage height (vertical milling spindle/table surface): 490 mm - Permissible load: 300 kg - Weight: 230 kg - Rotation range in horizontal position (axis C): 360 ° - Tilt range (axis A): +450 / -150 ° - Pivoting range (axis B): ± 450 ° - Measuring range with direct digital display: Resolution 360000 x 0.001 ° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Space requirement with safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg - Floor load: 3000 kg/m²

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout AXESTA and 2 Accessory Cabinets from University Ownership, Excellent Condition Technical Data: >> Machine No.: 0494 >> 3-axis digital readout AXESTA >> Swiveling, tilting, and rotating table >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm Djdpfx Ajxxzl Neddecr >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Drawbar system S20x2 >> Weight approx. 1,300 kg Accessories and Equipment: >> 3-axis digital readout AXESTA >> Coolant system >> Central lubrication system 2 accessory cabinets with tooling: collets, horizontal and vertical tool holders, clamping tools, dividing head with 3-jaw chuck, vise, tailstock, faceplate, additional small swiveling, tilting and rotating table, rotary table, tailstock, vise, and much more About the Machine: Offered here is a Deckel FP3 universal milling machine in excellent condition. All spindles move easily. The machine comes with 2 tool cabinets filled with accessories. Previously owned by a university. An oil change has been carried out. Mechanically and electrically tested. The digital display makes operation easier and even more precise. Take the opportunity to view and test the Deckel FP3 under power on site.

Condition: ready for operation (used), Year of construction: 1982, travel distance X-axis: 1,650 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 3,500 kg, Mitutoyo 3-axis DRO table 2000 x 700 mm travels 1650 x 1000 x 1000 mm Djdpfewxyzfsx Addjcr automatic lubrication spindle taper SA 40, maximum spindle speed 2066 rpm weight 7500 kg

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories. Dsdpfxjwwwqhs Addscr

Condition: good (used), Year of construction: 1998, Machine is dirty Technical condition good Rotating and swivel table is mounted Dcjdpfx Adovptmkjder

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Dedpfx Adsrt Ip Nsdjcr Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 Dcsdetwlwzspfx Addsr >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2867 >> Turn-tilt-swivel table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan Dcjdot Aarpopfx Addjr To the machine : We are offering a Deckel FP1 universal milling machine built in 1985 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 1,260 mm, total length: 1,500 mm, Universal dynamic balancing machine for rotors from 3 - 300kg. CAB803 measuring system, class C protection, CE mark Dcedpfx Adou Nmppjdsr

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0681 >> Swivel and tilting table (recently overhauled) >> Speed range: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Features: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Equipment and Accessories: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication Dcsdsxu E I Hepfx Adder About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are nearly new. The swivel and tilting table is as new. An oil change has been carried out. The machine has been mechanically and electrically tested. The digital readout makes work easier and more precise. Take advantage of the opportunity to inspect and test the Deckel on-site under power. The machine is immediately available!!!