Coiler straightening machines

Dimeco straightener 800 x 1 mm

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via Fgjdpfx Adecxxx Rjdsk analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² Fgjdpfx Adocdrmmodjk - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable. Fsdpfxog U Utvj Addegk

Condition: good (used), Year of construction: 1999, Lg 33922 Unwind-straightener combination SOPREM BRH 7-200-80U-1250 BAP strip width max. 200 mm Coil weight max. 1,250 kg Spreading range approx. 380 to 430 mm Fgjdpfx Adjhuwacjdjk Coil outer diameter max. 1,300 mm Strip thickness approx. 0.8 to 3 mm Working direction from right to left

Year of construction: 2009, condition: used, material width 320 mm material thickness 8 mm Fsdpsp U Uwisfx Addegk no. of straightening rolls 9 material cross-cut 2000 mm² weight of the machine ca. 4,2 t dimensions of the machine ca. 2000x2000x2400 mm

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Fedoi El Ucspfx Addogk

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller Fgedpfxjq A Tw Rs Addek • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: used, Year of construction: 1984, material width:350 mm coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm Fodpfet Hmk Tjx Addsgk coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 weight of straightening machine:2 t dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm weight of decoiler:1,3 t dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m

Condition: refurbished (used), Year of construction: 2025, Drive: servo motor Fgjdpfx Adsr H Dwijdjk Belt width max. 300 mm Belt thickness 0.5 - 4.0 mm Cross-section max. 1,200 mm² Feed length 0 - 9,999.9 mm Accuracy + / - 0.05 mm Roller diameter 80 mm The feed rollers are hardened and ground. The top roller is lifted to feed in the strip via a pneumatic cylinder and valve. pneumatic cylinder and valve. The contact pressure of the top roller is applied pneumatically via short-stroke cylinders. The top roller is mounted in a torsion-resistant manner to prevent one-sided roller pressure. roller pressure is prevented. Off-center belt transport is permitted. An infeed roller basket, an adjustable lateral belt guide and a belt end belt end control on the infeed side are included in the standard version. included. Protective covers on the feed rollers and the drive elements. The intermediate lifting can be closed and switched off

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Fgodpfx Adetgvgpedok Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder