Hydr. pressbrake

DURMA HAP 30.90

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm Blsdpfxew S Efzs Apvsk swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, Year of construction: 2014, operating hours: 1,760 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 650 mm, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, rotational speed (max.): 4,500 rpm, swing diameter over cross slide: 380 mm, chuck outer diameter: 210 mm, bar diameter (max.): 66 mm, Equipment: documentation/manual, We offer this used DMG MORI NEF 400 CNC lathe, year of manufacture 2014. type: NEF 400 serial number: 01620009641 Bjdey Iuvcopfx Apvslk year of manufacture: 2014 max spindle speed: 4,500 rpm Hydraulic chuck Swing over cross slide: 380 mm Turning length: 650 mm Siemens ShopTurn 840 D Bar diameter: 66 mm Hydraulic tailstock 12-position turret With chip conveyor Only 1,760 spindle hours If you have any questions or would like more information, please feel free to contact us or give us a call.

Condition: good (used), Pressure 110 Ton Bedpfx Aew Hx Rzspvolk Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Blodpfx Aporfx Utovok Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 1,000 kg, total height: 3,500 mm, load capacity: 2,500 kg, throat depth: 5,000 mm, working height: 3,000 mm, DGUV certified until: 06/2025, Equipment: documentation/manual, Column-Mounted Jib Cranes & Wall-Mounted Jib Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoist – Multiple Systems Available For sale are several column-mounted and wall-mounted jib crane systems from Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The systems offer a load capacity range from approximately 50 kg up to 2,500 kg, making them suitable for use in workshops, manufacturing plants, assembly workstations, as well as in in-house logistics. Some of the cranes are designed as classic column-mounted jib cranes with a single jib arm, while select models feature a double-jib column design, allowing coverage of two separate working areas. All cranes are equipped with electric chain hoists and trolley carriages, operated via pendant controls. The systems can be purchased individually. Inspection by appointment is possible. Taucha Column-Mounted Jib Crane – Load capacity 2,500 kg Heavy-duty column-mounted jib crane with floor-mounted steel column and jib arm for industrial lifting and assembly applications. Taucha Column-Mounted Jib Crane – Load capacity 2,000 kg Column jib crane with pivoting jib for material handling in production and assembly areas. Taucha Column-Mounted Jib Crane – Load capacity 1,600 kg Bljdpoyt Hc Djfx Apvek Industrial crane with column base and pivoting jib, suitable for medium to heavy loads. Taucha Column-Mounted Jib Crane – Load capacity 1,250 kg Column jib crane with jib arm and trolley for precise material movement. Taucha Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with electric chain hoist and pivoting jib for assembly workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with Liftket electric chain hoist, suitable for industrial lifting operations. Taucha Column-Mounted Jib Crane – Load capacity 800 kg Column jib crane with pivoting jib and trolley, ideal for workshop and production areas. Taucha Column-Mounted Jib Crane – Load capacity 800 kg (Double Jib) Column jib crane with two opposing jib arms, suitable for servicing two workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with electric chain hoist, ideal for lighter lifting tasks. Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with Liftket chain hoist and pivoting jib. Demag Wall-Mounted Jib Crane – Load capacity approx. 315 kg Wall-mounted jib crane with Demag electric chain hoist, suitable for workstations with limited space. Taucha Column-Mounted Jib Crane – Load capacity 250 kg Compact column-mounted jib crane for light loads. Taucha Column-Mounted Jib Crane CS KD 250-6 – Load capacity 250 kg Column-mounted jib crane with pivoting jib and electric chain hoist. Liftket Column-Mounted Jib Crane – Load capacity 250 kg Column jib crane with Liftket electric chain hoist for assembly tasks. Taucha Column-Mounted Jib Crane – Load capacity 200 kg Column jib crane for light material handling. Taucha Column-Mounted Jib Crane – Load capacity 125 kg Lightweight column jib crane for smaller components and tools. Taucha Column-Mounted Jib Crane – Load capacity 100 kg Compact workshop crane for light loads. Taucha Column-Mounted Jib Crane – Load capacity 50 kg Very light jib crane for small lifting applications.

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Bsdpfx Asyxn H Nspvolk

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, throat depth: 410 mm, oil tank capacity: 220 l, travel distance X-axis: 750 mm, controller manufacturer: ESA, controller model: S 875W, working width: 4,100 mm, bending force (max.): 220 t, back gauge: 750 mm, distance between stands: 3,600 mm, control type: CNC control, degree of automation: automatic, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Hybrid Bending Press MVD 4100 x 220 Tons HC-Series CNC ESA S 875W 21″ *dxf 3D ready 8 axes (Y1-Y2-X-R-Z1-Z2-X5_conical_A1) Automatic WILA crowning table Dsp Laser GIVI MISURE high-precision optical scales UNIMEC back gauge Upper tool clamp: Promecam Rolleri Type H = 150 mm Multi-cavity die, full length Blsdpfsx N Rxcsx Apvsk Press force: 220 tons Bending length: 4100 mm Distance between uprights: 3600 mm Throat depth: 410 mm Table – ram opening (“light”): 515 mm Working height: 965 mm Y-axis stroke: 310 mm Y-axis descent speed: 200 mm/s Y-axis working speed: 0–10 mm/s Y-axis return speed: 200 mm/s X-axis back gauge stroke: 750 mm Power: 18.5 kW Dimensions (L x W x H): 5600 x 2200 x 3040 mm Approximate weight: 13,700 kg

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas M70 Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + FMB m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader Bsdpfxjy Hl Hie Apvolk FMB turbo 3-36 equipped with swarf & coolant tank, fire distiguisher. ON/OFF 29.564h (status 24.03.2026) Running hours 26.607h (status 24.03.2026) GBL function (standard) LFV function: no

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping Blsdpfjxaa Ursx Apvek - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN 530, workpiece length (max.): 1,250 mm, workpiece width (max.): 850 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,200 kg, table width: 850 mm, table height: 640 mm, table length: 1,250 mm, spindle speed (max.): 18,000 rpm, distance table to spindle center: 700 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, DECKEL MAHO DMC 100V Machine after complete rebuild. Spindle overhauled and bearings replaced. Tool measurement laser: BLUM Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: DECKEL MAHO Model: DMC 100V LINEAR Control: HEIDENHAIN 530 Year of manufacture: 2003 Table size: 1250x800 mm Travel: X 1000, Y 800, Z 500 mm Workpiece weight: max. 1200 kg Bsdpfx Apox Elxijvjlk Major machine overhaul: 06.2025 Spindle: HSK 63A 18000 rpm Power S1/S2: 15kW/19kW Torque S6 40%ED: 130Nm Tool changer: 60 positions Workpiece probe: HEIDENHAIN Tool probe: BLUM laser Chip conveyor Internal coolant supply (IKZ) Machine in very good condition, after complete overhaul. Regularly serviced. Machine is in continuous operation.