Circular saw with double shaft

DWUPIŁA DMS 330P

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger Gjdpfxogwqk Sj Ad Ujtw One single blade horisontal resaw Conveyors system between the machines included.

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit Gsdpfed Inktjx Ad Ustw - Fine trimming unit - scraper - buffing unit

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Gtodpenl Nqqofx Ad Uew Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Godod H Hmhepfx Ad Uotw Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: new, Year of construction: 2022, Diameters 40-140mm Engine 2.2kW Gtodpfx Ajdprvued Uow Price per 1 piece

Condition: good (used), Year of construction: 1983, functionality: fully functional, Tool sharpening machine with wet grinding. Technical data as per photo. With coolant pump Gjdpfoup U R Tsx Ad Ustw and dividing unit.

Condition: new, Year of construction: 2024, Padeves trepe. Stepfeeder. For log feeding and separation Height from 1.0 m. Gedjudzycspfx Ad Uotw Width from 1.8 - 6 m For material diameters from 5 - 20 cm Speed up to 20 pieces/minute Hydraulic Automatic feed

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Minimum cutting length: 500mm Minimum cutting width: 100mm Godpfxelrtnte Ad Ujtw Maximum cutting height: 160 mm Minimum cutting height: 40mm Pneumatic clamps

Condition: new, Year of construction: 2019, Produced diameters: 40-140 Engine 5kW End-of-shift product 30m3 per shift Gtsdpfod Rh Dxjx Ad Ujw

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, type of input current: AC, travel distance X-axis: 4,970 mm, travel distance Y-axis: 2,120 mm, travel distance Z-axis: 250 mm, number of slots in tool magazine: 24, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, spindle motor power: 12,000 W, mount diameter: 350 mm, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, spindle speed (max.): 20,000 rpm, spindle speed (min.): 600 rpm, tool weight: 8 g, Equipment: documentation/manual, Complete machine, with Coral filter system and SCM lifter for sale. The equipment has very little use. Numeric control machining centre, with mobile gantry and fixed worktable for the processing of solid wood and various types of materials: glued laminated timber, plywood, chipboard, MDF, Aluminium etc. Designed using the best three-dimensional solid modelling systems, the structure is composed of a machine bed and a mobile gantry made of electro-welded steel. Component's milling of machine bed are performed on high quality CNC machining centres, with one single positioning operation, in order to guarantee the very best planarity, perpendicularity and precise tolerances. The control unit is a numeric control interfaced with an industrial PC. The CNC solution with PC combines all of the qualities of numeric controls with the user-friendliness typical of personal computers. Godpewd Nrdjfx Ad Ujtw The PC allows to use the operator interface Maestro cnc, developed by SCM to make machine programming fast and simple even for the less skilled operator. Technical specifications: - drilled and tapped holes spaced 120x120 mm for vacuum connection of jigs and equipment fitting - groove scheme spaced 40 mm for suction cups or rubber gaskets - n. 2 working areas - max. dimension to work in Y direction = 2170 mm TELESOLVE teleservice via internet Mobile console with "eye-M PRO" integrated PC TECPAD - Remote machine control Mobile console with 7" touch-screen color monitor for control and management. PRISMA KT Machining Head The machining head with 5 interpolating axes, fixed directly to the mobile gantry, guarantees maximum strength during routing operations and provides top finishing quality also with high stock removal. Technical specifications: Routing unit with 5 interpolating axes − electro-spindle with HSK 63F quick release tool-holder − Rotation speed 600-20000 rpm − right and left rotation − max power (S1/S6) 11/12 kW (15/16.5 HP) from 9000 rpm − Inverter − C-axis rotation = 640° − B-axis rotation = 270° − C-axis equipped with TTS locking system (Total Torque System – SCM Patent) − "For Life" grease lubrication − liquid cooling with heat exchanger - Automatic dust extraction hood with four positions and ON-OFF by workpiece program. Two 250 (300) m3/h - 50 (60) Hz vacuum pumps Vacuum pump for each half-table. Independent vacuum circuit for each half-table. PRO-SPACE Safety system – full protection of the machining head with anti-ejection strips curtains and bumpers with emergency sensors - Emenency cable in the operator area - rear and side protection along the perimeter Enclosed cable-holder chain MAESTRO ACTIVE Human-Machine interface software (HMI) Maestro active is the new interface software (HMI) which has been unified across all SCM technologies. A single operator can easily and confidently run multiple SCM machines, reducing operator training times and facilitating entry into production. Windows 10 embedded 64 bit operating system Maestro cnc programming software MAESTRO CNC SOFTWARE SUITE – USER INTERFACE AND PROGRAMMING Advanced nesting free-form + Label module for Maestro cnc Rapid 24 - Rear Tool store Circular tool store anchored to the mobile gantry. Max load 96 kg