FLAT GRINDING MACHINE

ELB GERH

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 total power requirement: 22 weight of the machine ca.: 8,2 t dimension machine xH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Bjdju Tq U Iepfx Afhjcu Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Bcodpet Hwziofx Afhsu Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Bcsdoqzkdmepfx Afhsu

Condition: good (used), Year of construction: 1992, 1,0 St. gebr. Flachschleifmaschine Hersteller: ELB Typ: SUPER - RUBIN 024 CNC Bcodpsi Ra Tyjfx Afheu Baujahr: 1992 Verfahrwege: Schleiflänge: 600 mm Schleifbreite: 275 mm Schleifhöhe: 375 mm Tischaufspannfläche: 900 x 300 mm Tischbelastung: 300 kg Vertikal - Vorschub: max. 300 mm/min. Quervorschub: max. 2.000 mm/min. Steuerung: UNICON Im Lieferumfang sind Schleifscheiben enthalten siehe Fotos.

Condition: good (used), Centre distance: 450 mm Bcedpow I A Uxofx Afhju Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Bcedpsvrxd Hefx Afhju Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Bcjdpfx Afow Au H Rohju Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: used, Year of construction: 2004, Technical details: faceplate diameter: 4770 mm Bodpfx Aovb Hlwofhocu swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm main drive: 100 kW total power requirement: 200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *

Condition: used, Year of construction: 2000, max. working diameter 20 mm max. working lenght 320 mm passage of spindle 24 mm Spindle speed 200 - 10.000 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. Bjdpfx Afsvnwfzjhecu The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Bsdpfxovca Izj Afhocu Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.