Climatic chamber temperature and humidity

Espec PL-2KPH -40°C bis 180°C

Condition: excellent (used), CTS Type: C-40/60 CTS small climate chamber air-cooled Test volume: 60 liters Temperature range: -40 °C / +180 °C Humidity range 10% to 98% relative humidity +10 °C to +90 °C in the temperature range +5 °C to +89.5 °C in the dew point range Dimensions (WxDxH): Inside: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal voltage: 230V 1/N 50 Hz Output: 3.3 kW Rated current: 13 A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Lhsdpfxsu Hlb Ee Abcod (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Year of construction: 2023, A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible. Lhsdpfx Abewx Rcyjced

Condition: ready for operation (used), 1 used bed type milling machine Manufacturer: Knuth Model: KB 1400 Year: 2006 Technical Specifications: Working Area Distance spindle axis to table surface: 150 mm – 650 mm Number of T-slots: 3 Table clamping surface: 1400 mm x 400 mm T-slot width: 18 mm T-slot spacing: 100 mm Height adjustment speed (max.): 1670 mm/min Travel X-axis travel: 950 mm Y-axis travel: 400 mm Z-axis travel: 500 mm Vertical Milling Head Spindle taper: SK 50 DIN 2080 Overhang: 510 mm Spindle speed (vertical): 30 rpm – 1800 rpm Quill stroke: 105 mm Head swivel range: ±30° Rapid Traverse Rapid traverse X-axis: 1670 mm/min Rapid traverse Y-axis: 1670 mm/min Ljdpfjxnp Epex Abcohd Rapid traverse Z-axis: 1670 mm/min Feed Feed speed X-axis: 18 mm/min – 627 mm/min Feed speed Y-axis: 18 mm/min – 627 mm/min Feed speed Z-axis: 18 mm/min – 627 mm/min Drive Capacity Main drive motor power: 7.5 kW Feed motor power: 0.75 kW Z-axis motor power: 0.75 kW Coolant pump motor power: 0.04 kW Dimensions and Weight Coolant pump flow rate: 12 l/min Dimensions (L x W x H): 2.29 m x 1.77 m x 2.12 m Weight: 3660 kg

Year of construction: 2015, condition: ready for operation (used), A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Lhedpfx Aboxvrt Socsd

Condition: excellent (used), Type: Weiss WT3-340/70 Very good condition Weiss temperature cabinet with S!MCON / 32 control, air-cooled (refrigerant (R-404A) (can be converted to R452A on request) Test room capacity: approx. 335 liters Test room dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Data for operation: Test room lighting halogen bulb 24V, 50W Lsdpfev Edd Ssx Abcohd Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Nominal current: 12.5 A Nominal power 4.1 kW Fuse provided by customer 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 58 dB(A) Data for temperature tests: Temperature range: -72 to +180 °C Temperature deviation over time in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-404A / R-23 Weight: 585 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run with calibrated measuring devices. Condition: used / used Very good condition

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Ljdpouudx Djfx Abcehd Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Year of construction: 2005, Main Drive Lsdpfx Aox E Eagebcshd Spindle Speed 4000 RPM Number of axis 3 Movement X-Axis Movement 762 mm Z-Axis Movement 406 mm Y-Axis Movement 305 mm This 3-axis HAAS TM1 was manufactured in 2005. It features a vertical machining center with a spindle speed of 4000 rpm and travel dimensions of X 762 mm, Y 305 mm, and Z 406 mm. If you are looking to get high-quality milling capabilities, consider the HAAS TM1 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Bead mill Molteni MS.15 Ex-protected version grinding container 15 l additional grinding tank double jacket power 17,5 kW Lhedpfjiu H Ucjx Abced Very good ready to use condition, directly from production!!!

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space) ±0.1°C ... ±0.3 °C Maximum temperature change rate Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time ±1% ÷ ±3% Dew point range for long-term tests +2 / +94 °C Dew point range for short-term tests -20 / +2 °C External dimensions (L x D x H) 1320 x 2235 x 2137 mm Test space dimensions (L x D x H) 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per grid: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerants: R404A and R23 Ledpfowfddwsx Abcohd Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 52AMXTE5308, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 815mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.04, 0.08, 0.15mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.25Kw Spindle speeds (inf. Variable) 50-3500rpm Spindle to nose to table 0- 450mm Spindle centre line to column 171 – 482mm Overall height 2100mm Overall depth 1300mm Overall width 1625mm Weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 3 axis DRO system Infinitely variable spindle speeds longitudinal power feed Cross power feed Table guarding One shot centralised lubrication system Lhedpfx Abswmn A Tjcod Lighting Base splash tray Coolant system NB Machine ex Dyson apprentice training facility, in excellent condition