Base plate with main shaft and bearing

EWD Esterer SS 71 / HDE 71

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Nsdpfx Aexw Ubnokfewf

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled Nwedpfx Akowp Rqfofof All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 1990, condition: new, Brand SKF Type 6202-Z/QE6 Year of manufacture: Unused Weight (kg) approx. 9400 gross / 8780 net Number of pieces in stock 193.200 ( approx) Made in France Comments Contact us for min. quantity Nwsdpfx Aksqa Am Tofsf Verkoopcondities Contact us for min. quantity

Condition: like new (used), Min. input length: 500 mm, max. 6 m. Cross section: max. 140 X 250 Motor: 5.5 kW Sawing stroke servo swing arm Feed by means of rollers, 6 pieces top, 6 pieces bottom CNC control Maxi 8.0 Nedpfx Aksr A Et Tsfowf 1 X sorting unit per 11.5 m Machine is set up according to your wishes

Condition: good (used), power: 122 kW (165.87 HP), overall weight: 27,000 kg, Year of construction: 2001, operating hours: 21,200 h, For sale is a Sennebogen 825 Year of manufacture: 2001 Operating hours: 21200 Nodpfx Asua At Nekfewf Total weight: 27000Kg

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Nwodpfel Sli Djx Akfef

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW Nwjdpfxewvqkls Akfsf • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 10 ft, color: grey-black, empty load weight: 860 kg, ☎️ Call now Looking for a shipping container, storage container, or office container❓... Found it❗ ► New & used ► 10ft | 20ft | 40ft ► Various models | Side door | High Cube (HC) | Custom modifications, etc. ⏳ Nationwide delivery within a few days Why choose a shipping container? ✅ Durability ☰ Shipping containers are built to withstand the harshest weather conditions at sea for decades. ✅ Security ☰ Four steel walls protect your valuables—offering a level of security no garage can match. ✅ Flexibility ☰ By buying or selling, you can adjust your storage capacity at any time. ► Why choose us? Nwsdpswzkgdofx Akfjf ⚡️ Fast Delivery within just a few days. ☺︎ Honesty You get exactly what you pay for—no surprises. ☎️ Expert Advice Benefit from our expertise in: - Storage containers - Container conversions - Self-storage / container depots ✊ One-stop service Consultation→Sales→Delivery→Crane unloading→Customer support ⚙️ Quality Even our used shipping containers are fully functional, wind- and watertight. What are you waiting for? Call us now for a no-obligation consultation!

Condition: good (used), functionality: fully functional, Inclined conveyor for round timber and logs with 5 chain strands. Conveyor length approx. 2.70 m. Width approx. 6.15 m. Chain spacing 1.40 - 1.0 - 1.60 - 2.0 m Increasing from 0.70 to 1.90 m. Chains with flighting. Nwjdpfx Aowcp Snokfef Shaft 70 mm. Driven by a 3.7 kW geared brake motor. Can be demonstrated.

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Nwodpfxoxgt U Eo Akfof Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,