Used other equipment for sawmills for sale (54)

Condition: used, Connecting rod / bar frame strut / connecting rod as a spare part for a Wurster & Dietz GXV 71 or EWD bar frame. Technical data: Fgsdpfjzrx Etjx Adrjf - Overall length: approx. 3,270 mm - D1: 190 mm - D2: 150 mm - Material thickness: 50 mm - Centre-to-centre distance: approx. 3,020 mm

Condition: good (used), Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 32 A, cutting height (max.): 900 mm, cutting width (max.): 900 mm, Equipment: documentation/manual, lighting, motor brake, This sawmill includes: Fedpozk Exdsfx Adregf 2x Clamping devices 4x Vertical stops 4x Leveling devices with clamps 3x Log lifting arms 1x Pre-cutter 1x Log roller with drive 1x Saw blade lubrication 1x Water lubrication 1x Electric positioning control Basic cutting length: 9.0 m Log passage: approx. 90 cm Hydraulic pump: 17 liters Motor power: 11 kW Saw blade width: 100 mm The saw was used as a secondary source of income; approximately 500 cubic meters of timber were cut per year. The friction wheel gear has been replaced with a hydraulic feed system, and the hydraulic pump has also been replaced. It features a foldable cabin and a heater for the fingers, which is supplied by the warm hydraulic oil. The cast iron rollers were replaced approximately two years ago, and approximately 800 cubic meters of timber have been sawn with them. Two saw bed extensions are included, one 3.0 m and one 2.0 m, for a total cutting length of 14.0 m. A suitable 18.5 kW electric motor is also included, but has not yet been installed. Approximately 15 saw blades for hardwoods and softwoods are included, some of which are new. The machine runs very well, all components are fully functional, and there are no leaks in the hydraulic system. The saw can be inspected while in operation. Sale due to the purchase of a new machine.

Condition: used, Bruks RR 700 butt end reducer Fgodezrfakspfx Adrof Technical data: Log length: 3.0 to 6.2 meter Max log diameter: 700 mm Max rootflares: 180 mm radial Capacity: 2 - 7 logs/ min

Year of construction: 2026, condition: new, functionality: fully functional, log sorting line with 10 pockets, 5 on each side. processes logs with diameters of 5-200 mm and lengths of 1.5-4.2 m. consists of: 1. accumulation conveyor, 12 m long. 2. separator. 3. receiving conveyor, 6 m long. 4. scanner conveyor, 9 m long. 5. 10 sorting pockets. total length: 28 m. Fsdpfx Aozn Awfodrjgf the cost of electrical connection with Siemens components is not included in the equipment price; estimated at 30,000 EUR.

Condition: like new (used), functionality: fully functional, HBS 840-44-E Bark Shredder totally renovated and as good as new Fgodpfei E Tkwsx Adref

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Fodoxl Aaujpfx Adrogf

Condition: as good as new (ex-display), 7 pieces of guides suitable for the gang saw ESTERER HD 30 or EHD 30, absolutely as good as new because unused, 5 of the 7 guides are hollow body guides for cooling water flow Fodpsigqqhjfx Adrogf

Condition: new, pinion heads for gang saw complete with ball joint pins and red brass bushes, spare part number 23 a + b or 235254-01 Fedpfx Astq Eq Redrsgf

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Fgsdjywh Hmepfx Adref

Condition: excellent (used), functionality: fully functional, Complete sawing frame for EWD Esterer gate, type HDN 600 or HDS 600 with width adjustment. Fsdpozn Uv Hsfx Adrsgf Includes Jansen double-yoke tensioner. Lightly used. Ideal for keeping spare parts in stock.

Condition: excellent (used), For sale: FINSCAN moisture meter scan moisture meter, measures dried lumber. (these pictures are just as reference, the Finscan for sale is exact same) Available for delivery July 2026 Fjdpfszdq Nnex Adrogf Located in Finland.

Condition: used, Wood sawmill 1/26 Fjdpfx Adszkh N Sjrsgf

Condition: used, Wood sawmill 2/26 Fgjdpfezkh N Esx Adrjf

Condition: like new (used), Used belt conveyor in good condition Fgjdpefh Inwofx Adref

Condition: reconditioned (used), A completely refurbished infeed for Resaw in excellent condition Fjdshpyakepfx Adrogf

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Fgjdpfxoyw Sv Eo Adrjf

Condition: used, heavy-duty gate tension car, manufactured by Linck, type Va, with auxiliary car Vy. Fgodpec Ulvbjfx Adrjf

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc. Fedpszht Hwefx Adrsgf

Condition: new, 2 new, two-part gang saw bottom rollers, 250 mm diameter, bore 105 mm, 685 mm long Fgsdpfsyctwtex Adrjf

Condition: excellent (used), HHydraulic drive variator with 3.0 kW motor, 1450 rpm, with reduction gear for speed reduction, electric adjustment via worm gear motor, output speed 0 to 25 rpm, output torque 1200 Nm at 14 rpm or approx. 3 kW at 14 to 25 rpm Fgodpfxox U Tfps Adrsf

Condition: reconditioned (used), Total length 550 mm including 2 hydraulic side pressure registers and 2 adjustment registers for frame posts 70 mm, max. tensioning force per saw blade 6.5 tonnes If required: Magnetic gauges with 3 tubes, 2 magnets and 1 hole for insert sheets are in stock for the following wood dimensions: 18/20/24/25.5/38/40/45/48/50/58/60 and 75 mm, as well as inserts with 12 mm Ø fixing bolts in various widths from 2 to 12 mm Fgjdor Ezyxspfx Adref

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Fgedpfxozf Nbxj Adref

Condition: used, Meassuring frame for logs and timber type Rema 9001 Maximum meassuring field 700 mm Fgodpfx Adszd Azvorof

Condition: excellent (used), functionality: fully functional, Robust EWD reduction gearbox for gate drive. Shaft 100 mm. Pulleys 900 x 280 and 560 x 450 mm. Pulleys attached to the shaft with tensioning elements. Used for 2 years. Suitable for all EWD / Esterer gates. Fgjdpfx Adjzdiq Sorjf

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm Fedpfx Adsw Eu Akjrsgf 1 set of lower guide shoes for bearing 6210 for SS 56