Bed type milling machine

FIDIA K 911 - 5 ASSI

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 • 45° diagonal milling head (C 0.01° / A 0.01°) • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 • HR 550 FS handwheel • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm Gbsdjygtnaopfx Anzon • Tool holder SK 50 BIG-PLUS • Panelling and grating • Double chip conveyor • SHW-UniScan • Sealing air • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area

Condition: used, Aufspannplatte - Tisch einer Langhobelmaschine - Tischbreite/Aufspannbreite: 1845 Tischlaenge/Aufspannlaenge: 5505 mm Gsdpfx Ansbn Amfezebn 7 T-Nuten laengs fuer T-Nutensteine: M 30 T-Nutenabstaende zueinander: 263 mm Gesamtlaenge: 6230 mm Plattenhoehe insgesamt: 350 mm Gewicht: 11 t

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 1,80,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 1,80,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Gbsdpewdmy Sefx Anzon Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Condition: used, Year of construction: 2023, Lathes Travel distance X: 495 mm Travel distance Y :125 mm Travel distance Z: 1560 mm turning length: 1540 mm max. turning diameter: 660 mm max. circulation diameter: 660 mm spindle boring: 65 mm range of revolutions till: 5000 rpm powered tools B-axis: ±120° Tool spindle speed: 12,000 rpm Tool magazine: 38 tools Machine weight: 18,800 kg Condition: rarely used, like new Gbodoy Nxc Aepfx Anzjn

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC-Steuerung Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Gbjdpfx Ajy H Epwsnzjn Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Gedpfxsvf E Avs Anzjbn Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), Description: The machine is in good technical condition; testing is possible by prior agreement. Application: production of gears (spur gears, helical gears, shafts) CAPACITY Max. gear diameter: approx. 400 mm Max. module: typically 6–8 (sometimes up to 10 for newer versions) Max. gear width: approx. 275–400 mm SPINDLE AND TOOL Cutter speed: up to approx. 500 rpm Gbodpfjy Amiqox Anzsn Tool diameter: approx. 160–240 mm Motor power: approx. 15–17 kW TABLE Table diameter: approx. 380–400 mm Table bore: approx. 80 mm Load capacity: up to approx. 1000 kg DIMENSIONS AND WEIGHT Length: approx. 4680 mm Width: approx. 2395 mm Height: approx. 2515 mm Weight: approx. 5–6.5 t (standard version)

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing Gbjdpfxovkpu Ho Anzon *

Condition: new, functionality: fully functional, Year of construction: 2026, Product characteristics: The Cormak 2-ton gantry crane is a specialized industrial machine designed for moving heavy loads in industrial halls. It consists of many elements, including a supporting frame, a trolley and other components that enable easy, safe and precise movement of loads horizontally and lifting and lowering them using hooks. The model is distinguished primarily by its durability and stable construction, thanks to which it can be used in difficult industrial conditions. This crane is also resistant to torsion, which is ensured by additional reinforcements used in the structure. Gbsdpferidh Nsx Anzen One of the most important features of the crane are four return rollers that ensure easy movement of heavy loads. These rollers are extremely durable and abrasion-resistant, which guarantees their long service life. Another important element are the built-in parking brakes, which ensure safe stopping of the crane in any place. Height adjustment on the device is easy and safe when the lever is not loaded and with the help of two screws securing each bracket. The crane's structure is durable and stable, and its ease of use makes it an ideal solution for companies that need an efficient and reliable machine for moving heavy loads. Moreover, the multitude of retrofitting options allows it to meet even more applications and tasks in various industrial sectors. Thanks to its efficiency and precision, the overhead crane is a versatile work tool that can be additionally equipped with rope or chain winches. After using a block, an overhead crane with a winch or chain allows for even more precise and effective movement of heavy loads. As a result, it is used in many industrial sectors, such as construction, metallurgy and the chemical industry. Using a gantry crane, you can carry out warehouse, assembly, loading and unloading works, as well as repairs. All these activities are performed with high precision and safety, which in turn translates into higher quality of work. Technical parameters: Load capacity: 2000 kg Double T-carrier: 100 x 180 mm Height: 2400 mm – 3600 mm Width: 2360 mm Weight: 168 kg Overhead crane without a winch visible in the photos

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Gedod Nw Ttjpfx Anzobn Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv