Minibus

Ford Transit Minibus 2.4 - Dach-Klima - 17er

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm control SIEMENS, SINUMERIK 840 D travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm Nsdowx R Rkepfx Ag Nowc main spindle bore 53 mm main spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 12 tool shaft (cylinder shaft DIN 69880) VDI 25 speed of driven tools 0 - 8000 U/min max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant

Condition: excellent (used), Year of construction: 2015, operating hours: 167 h, For sale at a bargain price, a wireless lawnmower controlled by a remote control, is ideal for difficult conditions such as steep roads or dangerous places. (see Video) It has 4-wheel drive and a long range remote control. It will mow up to 1500m per hour. - A bargain price because of the winter season, it will be 20% more expensive in the spring! So it is recommended to buy this equipment now! Of course, fully functional and ready for further work. - Straight from a bankrupt company from Sweden. The new one cost them over 25 4-wheel drive, remote control - everything is 100% functional. The lawnmower was purchased in December 2014 and only used in the spring of 2015! Key data: Performance / Consumption Engine Briggs & Stratton 950 Displacement 223 cm3 Fuel tank capacity 4 l / 1 gallon Fuel unleaded petrol Hydrostatic transmission Speed 0 - 4 km/h / mph Wheel steering Blade 1 rotary Cutting width 56 cm / 22 in Cutting height 4 - 9 cm / 2 - 4 in Manual clutch Option Mulching kit 2 Capacity up to 1500 m/h Fuel consumption 1 l/h Gradeability 30 degrees / 58% Dimensions 1040 x 900 x 600 mm Weight 125 kg Nsdpfovv Hi Esx Ag Njwc Transportability in Poland and the European Union!

Condition: used, Year of construction: 2013, travel -x axis 800 mm travel -y axis 520 mm travel -z axis 550 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min numbers of positions in the tool changer 24 520 x 950 (B x L) mm Milling machining centers - vertical | POSmill - C 800 Kompakt equipped with 24- way tool changer and ITC. The machine is in a well-maintained condition. For further technical details, please refer to the offer. Nsdpfxjv Td Ias Ag Njwc - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C800 | C-800 | C800Kompakt | C -800-Kompakt

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Njdpfxjwhm S No Ag Njwc Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Nwedpevf D Ansfx Ag Nec

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Nodpfx Agsvvtpxo Nswc Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, Used Complet Bitzer Co2 Cooling installation for processing rooms and or corridors This unit, in excellent condition, is equipped with the following main components: 1. Compressors Rack Teko ROXSTA 2.O, with 4x Co2 Compressors Bitzer 4DTC-25K-40P, and 1x Co2 Compressor 4FTE-20K-40S, and original control cabinet - Compressors Type: 4DTC-25K-40P (x4), 4FTE-20K-40S (x1) - Volume: 21.2 m3/h (x4), 17.5 m3/h (x1) - Cooling capacity for CO2: 264.5 kW at -5°C/30°C, 222.6 kW at -10°C/30°C, 153.5 kW at -20°C/30°C - Dimensions of the compressors rack: 3300 x 950 x 2200 mm - Control cabinet dimensions: 1350 x 950 x 2000 mm - Year of production : 2018 2. Evaporators - 5 pieces Guntner S-DHN 051C/24 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-DHN 051C/24- - Cooling capacity: 18.9 kW at DT8, 15.3 kW at DT7 - Surface: 101.9 m2 - Air flow: 11 240 m3/h - Fin spinning: 4 mm - Fans: 2 x 510 mm - Dimensions: 2550 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2019 Nwjdexpvtcepfx Ag Nsc - Volume: 25.7 L - Weight: 149 kg - Quantity : 5 pieces - Year of production : 2019 3. Evaporators - 3 pieces Guntner S-CXDHN 046C/37 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-CXDHN 046C/37 - Cooling capacity: 21.9 kW przy DT8, 17.7 kW przy DT7 - Fin spinning: 7 mm - Fans: 3 x 460 mm - Dimensions: 2950 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2021 - Volume: 29.9 L - Quantity: 3 pieces - Year of production : 2021 4. Evaporators - 1 pieces Guntner S-CXDHN 046C/37 dual discharge, - Type: GADC CX 035.1/41M/HEC7E.TNNN - Fin spinning: 7 mm - Fans: 4 x 350 mm - Dimensions: 3150 x 1000 x 300 mm - Electric defrost - Year of production: 2024 - Volume: 14.2 L - Quantity : 1 piece - Year of production : 2024 5. Evaporators - 4 pieces Guntner GACC CX 040.1/3-70.E-1845718M, standart cubic evaporators - Type: GACC CX 040.1/3-70.E-1845718M - Cooling capacity: 17.8 kW at DT8, 14.4 kW at DT7 - Surface: 63.3 m2 - Air flow: 8 640 m3/h - Fin spinning: 7 mm - Fans: 3 x 400 mm - Dimensions: 2370 x 550 x 580 mm - Electric defrost - Year of production: 2019 - Volume: 11.1 L - Weight: 114 kg - Quantity : 4 pieces - Year of production : 2019 6. Gascooler Guntner GVD080.4C/2x3-EK.E, V-shape - Type : GVD080.4C/2x3-EK.E - Year of construction : 2018 - Volume : 60,2 ltr - Fans: 6x 800 mm, 490 RPM, with inverter - Dimensions: 4500 x 2320 x 2850 mm

Condition: used, Feeler gauge, dial gauge, measuring probe, measuring probe, centering device, centrizer, 3D probe, probe insert, measuring probe, digimatic indicator -Manufacturer: Heidenhain, measuring probe TS 220 . 293 488-07 -Intake: SK50 -Case: with accessories, see photo -Dimensions of the case: 400/195/H140 mm Nwedpfxsg T Amrs Ag Njc -Weight: 6.4kg

Condition: used, mileage: 2,49,108 km, power: 92 kW (125.09 HP), first registration: 07/2015, fuel type: diesel, number of seats: 17, gearing type: mechanical, next inspection (TÜV): 07/2025, emission class: euro6, color: white, Year of construction: 2015, Equipment: ABS, air conditioning, navigation system,

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 8P31127C4, functionality: fully functional, operating hours: 10,799 h, travel distance X-axis: 1,145 mm, travel distance Y-axis: 615 mm, travel distance Z-axis: 615 mm, controller manufacturer: Heidenhain, overall weight: 6,500 kg, controller model: iTNC 530, coolant supply: 20 bar, number of spindles: 1, rotational speed (max.): 12,000 rpm, spindle nose: SK-40 DIN69871, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10,799 h, Equipment: chip conveyor, rotational speed infinitely variable, Pinnacle LV 116 Control: Heidenhain iTNC 530 Travel X: 1145 mm Travel Y: 615 mm Travel Z: 615 mm Table size: 1200 x 600 mm Nwsdpfotphbzox Ag Noc Tool holder: SK-40 DIN69871 Tool positions: 30 Max. spindle speed: 12,000 rpm Operating hours: 11,658 h (as of 20.06.2025, machine remains in use) Rapid traverse: 30 m/min Weight: 6.5 t Equipment: - Through-spindle coolant 20 bar with belt filter unit - Mobile electronic handwheel - Heidenhain iTNC 530 Payment terms: 100% prior to dismantling and loading The spring disc pack for tool pull-in force was renewed in August 2024. We are a toolmaking company reducing our production capacity. The machine is powered up and in ongoing use. Inspection and test operation are possible. The machine can be handed over at short notice by arrangement. In the event of purchase, we can additionally offer: - Training of your personnel - Cleaning of the machine - Installation of transport locks - Loading onto the truck - Transport with our own truck - Unloading at your site - Placement of the machine at your premises - Alignment of the machine - Connection and commissioning