Frame- & Staircase- & Mortisingmachine

Gannomat Master 325

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm Fgedpfexdttpsx Addsk - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: new, power: 6.77 kW (9.20 HP), Year of construction: 2024, SCHORR track dumper RR500DHKAH PRO - Discover the advantages: - 9.2 hp four-stroke engine - Self-propelled & powerful track drive - Hydraulic scissor lift (discharge height 1.44m) - 500kg payload - Large & high-quality tipper body with large tipping angle - Folding passenger platform as standard - 6+2 gears SCHORR TRACK DUMPER DHKAH PRO WITH TIPPING HYDRAULICS, RIDER PLATFORM AND SCISSOR LIFT The SCHORR RR500DHKAH track dumper has a hydraulic tipping drive and a payload of 500 kg as well as a powerful 9.2 hp single-cylinder 4-stroke petrol engine. The special feature of the RR500DHKAH is the hydraulically controllable scissor lift function. This allows you to eject the transported material up to a height of 1.44 m - ideal for trailers, containers or other higher areas. Thanks to its slim design (700 mm), the minidumper can also drive through narrow paths and doors, making it an extremely flexible means of transportation. Thanks to the minidumper's powerful track drive, you can also overcome rough terrain, inclines and kerbs with ease. The rubber tracks provide a secure footing in any working area. Lifting and lowering the tipper body / box is effortless and effortless thanks to the hydraulic tipper drive, even when fully loaded. With a robust body made of thick sheet metal and a straight outlet that ensures quick and easy discharge, this dumper is a must for anyone who needs to transport heavy loads. Even tipping on slight inclines is no problem. The large tipping angle ensures that even fully loaded skips are emptied completely without you having to help manually. This saves time and effort and makes the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR500 Model: DHKAH Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight without/with packaging: 363 / 388kg Drive Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Speed: forward gear Forward gear: max. 8km/h Reverse gear: max. 5km/h Liquids Fuel tank capacity: 6L (unleaded gasoline) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil tank capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Max. Hydraulic oil flow rate: 9L/min Basic dimensions Total length platform folded: 1900mm Fedottg Upspfx Addegk Total length platform unfolded: 2100mm Total width (incl. chain): 710mm Overall height: 1050mm Container dimensions (inside): 740 x 665 x 435mm Container dimensions (outer dimensions): 1060 x 710 x 520mm Track width: 710mm Load volume (liquid): ~ 200L Load volume (heaped): up to 370L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm Packaging size: 1890 x 740 x 1220mm Filling height Side: 1030mm Front: 810mm Discharge height min./max.: 810 / 1440mm We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or e-mail. We look forward to hearing from you and being able to help you with advice.

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Fgodpfx Adsxmatnjdjk Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm Fgodpsi Hpk Uefx Addek minimum workpiece length: 250 mm aggregates: 2 brush units separately adjustable 1. brush: scotch brite medium / diameter 220mm, vario drive 2. brush : Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: Handwheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely variable) Motor power feed: 0.37 kW Machine length: 1400mm machine width: 900mm Weight: 500kg

Condition: excellent (used), SCM S520 thicknesser Working width 520mm Fgedpjitkx Eefx Addjk Working height 250mm Feed speed adjustable: 4 steps Shaft with conventional knives 4 knife shaft Power 4kw Weight 670kg

Condition: new, Year of construction: 2025, flue capacity: 350 kW Conventional yeld capacity: 279 kW flue diameter: 200 mm hot air delivery pipes: 3 x 300 mm flue length: 1200 mm oven width: 740 mm oven hight: 1040 mm air flow: 17800 m³/h power consumption hot air fan: 3 kW power consumption flue gas exhaust: 600 W aproximate surface to heat up: 5000 m³ area to be heated: 1000 m² heater height without hot air conveying pipes: 2500 mm heater width: 1100 mm Fgedpfx Aek Utrteddok heater length: 1900 mm weight: 850 kg

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting Fedpsd Exwgofx Addjgk KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Number of inserting heads 1 Programming CNC-driven Z-axis Working width 1200mm Working height max. 36mm Available immediately

Condition: used, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement surface scraper unit - finish Fgjdpfxexu E Nws Addjk spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: reconditioned (used), Year of construction: 1995, Motor power: 8.6 kW Fgjdpjv Npqrofx Addsk Voltage: 400 V 50 Hz Spindle: 30 + 40 mm Sliding table: yes Circular milling: yes Brake and emergency stop Speeds: 3000, 4000, 6000, 8000, 5000, 10000 rpm

Year of construction: 1997, condition: excellent (used), Window making machines Fodpfsiix Uvex Addegk WEINIG automatic tapping and slotting machine UNITEC 10, year 1997 profiling and milling machine UNIVAR 10, year 1997