Briquetting press

Gross GP Genius 2/50

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Container size: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Kdedjpfatpspfx Aadow Machine height: 1100 mm Weight: 400 kg

Condition: used, No. 04485 Veneer press Ott JU 2513 Used Electrically heated heating plates Hydraulic pressing pressure Aluminum heating plates Kdodpfx Ajw Npbzoadsw Plate dimensions 2550 x 1350 mm LW BUSSE heating plates renewed in 2019 and covered with Mylar film 4 hydraulic cylinders each 90 mm diameter Total pressing pressure 90 tons Specific pressing pressure 2.8 - 4.0 kg/cm2 Button control for closing / opening / stop Emergency stop rip cord Opening width 400 mm Total power 19 kW Stable construction with 3 longitudinal beams in the upper part of the press and 2 longitudinal beams in the press table Transport dimensions approx. 2900 x 1500 x 2000 mm LWH Weight approx. 4200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Kdodpfxoupwx Hj Aadow Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Condition: excellent (used), functionality: fully functional, BRIQUETTING machine , HYDRAULIC , AUTOMATIC , model POR STANDARD second hand machine working conditions : Excellent briquette cutter system CE mark : Yes briquett diameter mm. 65 briquett length mm.50 / 300 production from 60 kg. to 90 kg./hour motor power Hp 7,5 Kjdpfx Ajw E Iyioadodw net weigth kg. 800 overall dimensions cm.195 x 110 H=cm.150 volt. 380/50

Condition: as good as new (ex-display), Year of construction: 2023, Performance: 150-180 kg/h Motor: 11 kW Kdedekt Rcmspfx Aadew Voltage: 400 V Frequency: 50 Hz Weight: 1.5 t

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm Kdodpfjqlclbex Aadjw 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dealer wanted! Tariff number: 84659600 Briquette diameter: 70 mm Front bushing: 120 mm Kdodpfsvucclex Aadsw Briquette stroke max.: 100 mm Briquette stroke opt.: 80 mm Throughput (depending on material): up to max. 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil quantity: 220 liters Silo diameter: 1200 mm Silo shape: 12-corner Silo content: approx. 1.0 qbm Pump: 75 liters Hydraulic pre-compressor The feed must be free of metals and mineral contamination. Damage to the pressing tools and/or increased wear may result.

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used Ksdpfx Aoxl Ha Seadodw - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw 0.55 kW Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2025, Dealer wanted! Tariff number: 84659600 Briquette diameter: 50 mm Kjdpfovuccfex Aadedw Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput (depending on material): 30-60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Engine power: 5.5 kW Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil quantity: 110 liters Silo diameter: 1000 mm Silo shape: 12-corner Silo content: approx. 0.7 qbm Pump: 27 liters Hydraulic pre-compressor The feed must be free of metals and mineral contamination. Damage to the pressing tools and/or increased wear may result.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Kedpfew Hpizex Aadjdw Throughput: approx. 80 - 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Oil heating 6,374 operating hours Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Optional: Extraction unit available as a hopper attachment. Requirements: Ideal input material: chip length less than 25 mm Moisture content: 6–12% ATRO Machine is suitable for intermittent operation, e.g. up to 2 hours briquetting; 1 hour pause, etc. If the machine is to run continuously for more than 2 hours at a time, an optional cooling system must be connected.