Guilliet KXL four side planer

Guilliet kxl

Condition: used, Nikmann FS 41N planer and thicknesser - Planing width: 41 cm Lrsdpfx Abeya Drvscoi - Shaft with 4 knives - 2 table rollers - Motor with brake Machine in very good, excellent condition.

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Ljdpfx Aew Ix Alsbceri

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of Ljdjvuhumepfx Abceri operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables no. tables 4 Control system NC 410 Ledomt Hhwjpfx Abceri Safety standard CE mark Total installed power 20 KW

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table Lodpfx Abehlp D Njcjri - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: used, Weinig Profimat 22 with 4 shafts. Movable left shaft with measurement sensor, for automatic movement based on the width of the pieces inserted into the process. Dimensions and weight: Cm. 330*145*H160. Weight 1400 kg. (on pallet) Loderyb D Sspfx Abceri

Condition: excellent (used), Four side planer scm compact xl - planing width 23cm - planing height 13cm Lredpelat Hdefx Abcoi -electric lifting of the upper head and feed rollers - all spindles adjustable vertically and horizontally - bottom 4kW, right and left from one motor 7.5kw kW, upper 5.5kw universal 5.5kw Machine in very good condition

Condition: used, Year of construction: 1995, Swivel spindle: Yes -5 to 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling jaw adjustment: manual Height display: mech. counter Lrodpeuzkwzjfx Abcji Swivel angle display: mech. counter Milling stop display: mech. counter Milling spindle diameter: 30mm / new milling spindle Speeds: 3000, 4500, 6000, 9000 Motor power: 5.5 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2000mm Machine depth: 1400mm weight: 900kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Ledpfxsvz Eqxo Abcjri Weight 280 kg Total power requirement 2,2 kw

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm Lrjdpfx Aemiik Tebcoi