Hydr.CNC press brake

HAEMMERLE AP 200 / 3100

Condition: used, Year of construction: 1992, pressure 0200 t chamfer lenght 3100 mm distance between columns 3000 mm stroke length max. 400 mm feed down 160 mm/sec feed up 140 mm/sec feed under pressure 10 mm/sec oil volume 500 l dayligth 600 mm Control ModEva 12 S Cybelec throat 250 mm total power requirement 28 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 4,5 x 2,7 x 3,4 m Electric hydraulic machine with Cybelec ModEva 12S control, some Ledpfjyy A D Ssx Alysah accessories, foot and two hand switch pane and safety arrangements. Machine has been verhauled and modernized in 2009 !! Machine is floor standing. Machine has 9 controled axes and a Laser controled crowning arrangement.

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Lodpfxjy Hvp Ij Alyjah

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 22613, bending force (max.): 200 t, stroke length: 400 mm, throat depth: 300 mm, distance between stands: 2,750 mm, working length: 3,100 mm, TECHNICAL DETAILS Press force: 200 t Bending length: 3,100 mm Frame gap: 2,750 mm Stroke: 400 mm Throat depth: 300 mm MACHINE DETAILS Laedpfjygw Azox Alysh Control: CYBELEC DNC7000 Total power requirement: 18.5 kW Oil capacity: 330 l Suitability: Suitable only for thin sheet metal Dimensions & Weight Space requirement: approx. 4,300 x 2,400 x 3,600 mm Machine weight: approx. 18,500 kg EQUIPMENT Electric backgauge (X-axis) CNC crowning 4x controlled backgauge fingers 2x front support arms with SLIDING SYSTEM Hydraulic upper and lower tool clamping Side and rear safety guards Tools (3 cabinets) Foot switch Operating manual

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Speed: continuously adjustable Hand and foot remote control Diameter: 320mm to 2800mm Laodpfxed Nmx Ts Alysh Roller diameter: 300mm Speed: 6 - 60 m/h Power: 2 x 0.55 kW

Condition: used, Year of construction: 2018, operating hours: 8,563 h, functionality: fully functional, WEILER E 30 X 750 Cycle Turning Machine (2018) Manufacturer: WEILER Type: E 30 X 750 Cycle Turning Machine Year of manufacture: 2018 Condition: Used Laodpezy Sr Nefx Alyjh Operating hours: 8563 h

Condition: used, functionality: fully functional, Year of construction: 2001, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Lajdpfew Imq Rjx Alyoh

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning-milling center GILDEMEISTER GMX 400 linear with Y-axis and milling spindle Year of manufacture: 2003 Control system: Sinumerik Powerline Technical data: Drive power main spindle ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar diameter: 90 mm Number of magazine slots: 120 pcs. Tool holder for milling spindle: HSK 63 Drive power counter spindle ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar diameter: 90 mm B-axis / milling spindle: Drive power: Speed: Torque: Tool holder: HSK 63 Y-axis: +/- 110 B-axis: +/- 120° Laodpfx Aljwzbq Toyoh Lower turret: X-axis: Z-axis: Speed of driven tools: Number of turret slots: 12 pcs. Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure system with 20 bar - Preparation for 3D measuring probe - Tailstock function for counter spindle - Automatic sliding doors

Condition: used, Technical details: turning diameter over bed: 830 mm turning dia. over face-slide: 540 mm turning length: 3000 mm turning diameter over support: 540 mm centre distance: 3000 mm faceplate diameter: 800 mm Rapid feed X axis: 4 m/min. control: MTC K (Monforts) range of revolution per miute: 2 -1.600 U/min spindle passage: 88 mm tailstock taper ISO: MK6 tailstock quill stroke: 200 mm max. workpiece weight between centers: 1250 kg max. workpiece weight -without tailstock: 3000 kg turning dia. in gap: 1.200 mm length of gap: 310 mm Weight approx.: ca. 6.85 (ohne Späneförderer und Kühlmittelbehälter) t dimension machine xH: 2,55 x 1,1 x 1,29 m Lasdpfswmlknjx Alysh Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Three-jaw chuck D=500mm without clamping jaws Various accessories *

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Lodpfxjxdiige Alyoah Spindle Head Spindle taper - BT-40 (BIG PLUS System) Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar - Part probe - Tool probe - Rigid tapping - Electronic handwheel - 2 longitudinal chip conveyors - Separate tank with filtration unit - Full enclosure

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm Lasdpfsu Nc Riex Alyjh table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *