Drilling and milling machine Hans Schreiner ZAY7040H-HK

Hans Schreiner ZAY7040H-HK

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base Kdjdpfxsghtvao Akljr - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm Kdsdpfx Akovpfzyolor total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: used, Technical details: x-travel: 500 mm y-travel: 200 mm z-travel: 300 mm spindle taper ISO: MK 4 quill stroke vertical: 60 mm spindle head swivable left - right: 45° ° Distance- spindle nose to clamping surface: min./max.: 50 / 350 vertical mm throat: vertical 250 mm table clamping surface:: 710 x 200 mm table swivable approx.: 45° rechts/links turning speed range: 50 - 2 240 / 24 step U/min Kjdpfx Akou Nc Uuoljdr feed:: 25 - 1 120 / 24 step mm/min total power requirement: 3,2 kW weight approx.: 1390 kg dimension machine xH: 1,7 x 1,5 x 1,7 m - spindle center distance / clamping surface vertical: min/max: 50 / 350 mm - spindle nose / clamping surface horizontal: min/max: 0 / 350 mm - travel range of the milling bar 600 mm - without counterholder - incl. machine vice *

Condition: reconditioned (used), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete credentials, including a valid phone number and email address, in order to provide an offer. Deckel FP1 AKTIV (3-axis active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment features: - Heidenhain 3-axis active digital readout, type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Quill stroke on vertical milling head: 60 mm - Vertical milling head swivels and can be extended horizontally by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry check videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring distance 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring distance 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital readout overhauled - Set of wipers installed - LED indicators for digital readout replaced - Oil change Kjdpfxjxpwfgs Aklsdr - Vertical milling head newly mounted - Oil sight glass replaced Price quoted is net, ex-stock, loaded.

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg dimensions of the machine ca. 1,4 x 0,7 x 1,2 m cessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets (see photo) Steel Multifix system, size A with 3 quick-change inserts rotating center point chip guard chuck guard Kodpfxey Hxp De Aklodr fixed steady rest The machine comes from the training workshop of a renowned German corporation.

Condition: used, Pressure: 200 t Length of stroke: 40-180mm Strokes by minute: 32 Up table size: 630x500mm Down table size: 900x800mm Technical characteristics: AIR CLUTCH Power: 15 HP DIMENSIONS: Height: 3000 mms Width: 1000 mms Ksdpfx As Dvi Uokljdr Length: 2750 mms Weight: 14000kgr New electric system

Condition: like new (used), Type: for META Clip boltless shelving units Size: For shelves 30 cm deep Height: 15 cm Finish: Galvanized Kdsdem Dr Txjpfx Akljr Price: 30 cm €1/each The 50 cm version has already been sold. A shelf divider or shelf organizer is a practical storage accessory that allows shelving units to be divided into smaller compartments or sections. These elements are primarily used to create order and clarity for various items – such as books, documents, dishes, clothing, or office supplies. Shipping: Please inquire about freight costs by stating your postal code, location, and the desired quantity. Additional services: Planning, shelf assembly/disassembly, purchase/sale Changes and errors in technical data, specifications, and prices as well as prior sale reserved!

Condition: new, Year of construction: 2024, shaft diameter: 80 mm, Profile bending machine AHB 100 - with universal rollers - Three roller drive Kdodpfx Akevaw Eleler - Digital display left and right bending axis - Hydraulic lateral rectifier - Hydraulic drive of the bending rollers - Vertical and horizontal operation - built according to CE standards - Bending capacity flat bars max. 12 x 20 mm - Flat bent 200 x 40 mm - U profile inside and outside 180 mm - Angle profile web outside 100x100 mm - Angle profile web inside 90x90 mm - Solid material round 75 mm - INP 140 - Shaft diameter 100 mm - Roller diameter 315 mm - Bending speed 5 m/min. - Motor power 11 KW - Weight 2600 kg - module max Wcm3 -400 Volt 50 Hz. 3 ph. -1950x1600x2100 mm

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Matador VS2 lathe, year of manufacture 1992, three-jaw chuck, Multifix, rear splash guard, electric chuck guard. The machine is in good working condition and can be demonstrated under power by appointment. Ksdpfx Aksx Sqvgsledr

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany Kjdpfog Dvdcjx Aklsdr The pictures show you an older bigger machine