Edgebanding machine glue pot

Hebrock Leimbecken K36 Top Zustand

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail Hjdpfozx Ennsx Airow guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Hodpfx Aiszku Rperow In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV Hodpfx Aisqlckpsrjw - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, type of input current: three-phase, spindle diameter: 30 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, height adjustment type: electric, milling spindle length: 140 mm, SCM T130E Spindle Moulder Hjdpfsxzyltox Airew Spindle diameter: 30 mm Spindle length: 140 mm Variable spindle speed: 3000/4500/6000/7000/10000 RPM Main motor power: 7.5 kW Electronic spindle height adjustment via switch 4-roller feed unit Feed speed adjustment via variator CE certificate DTR technical documentation

Condition: excellent (used), Year of construction: 2010, Altendorf F45 Elmo 3-axis control Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Hedpfx Aey Sbvkoirjw Scoring unit: Prepared Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Crosscut fence with mitre function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Duplex mitre fence Year of manufacture: 2010 Price: 15,500.-

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Equipment: CE marking, documentation/manual, Automatic edge bander with EVA glue pot, chain panel feed, pre-milling, and corner rounding units. Technical features and options: • Feed speed: 9 m/min • Permissible panel thickness: 8 – 50 mm • Permissible edge thickness in rolls or strips: 0.4 – 3 mm • Permissible edge thickness in strips (manual feed): max 5 mm • Maximum edge roll diameter: 800 mm • Minimum panel length: 110 mm • Minimum panel length for cross-cut unit VR1/VS1: Hodpey Izktjfx Airew – With workpiece height h=18 mm: 180 mm – With workpiece height h=50 mm: 210 mm • Minimum panel width: 70 mm Machine equipment: • Conveyor belt with rubber pads • Pressure beam with bearing-mounted rubber rollers • Automatic edge feeder • Pressure rollers • Extendable support for safe positioning of large workpieces • Touchscreen control panel • Automatic cleaning agent spray unit (for easier removal of glue residue and to reduce glue buildup) • FLEX quick-change glue pot system • Internal LED lighting • CE certification

Condition: good (used), Year of construction: 1999, 0,4-5 mm Workingpiece thickness from to 6-45 mm Total length 4130 mm Feed speed 11 m/min. Hjdozafppepfx Airow Weight 1250 kg

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper Hsdpfeymyp Rex Airjw - Flat scraper blade - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm Hsdpfx Aow Imptsirjw - New exhibition machine -

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Hsdpfeyyvttsx Airew Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)