Cross rung cutter

HESS SPROSSEN FRA

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Ncjdpou Damdjfx Adpou

Condition: good (used), Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with independent motorisation Nedpfx Aeytufgsdpocu Squaring carriage length 3800 mm Main blade diameter 400 mm Scoring blade diameter 120 mm Blade tilt 0-45 degrees Max cutting height at 90 degrees 140 mm Max cutting height at 45 degrees 97 mm Blade rotation speed rpm 3000/4000/5000 Scoring rotation speed rpm 8500 Main blade motor power Hp 9,5 Scoring blade motor power Hp 1,7 Cutting width at parallel guide 1500 mm Parallel guide programmed with THK sliding Electronic adjustment of the scoring unit Squaring frame with ‘COMPEX’ device for angled cuts with automatic compensation of the stop position. Start/stop buttons integrated into the carriage Eccentric workpiece clamping arm Extension to the work surface Squaring guide with 3 LCD readers for stop positions Full support and Wireless: adjustable frame for angled cuts complete with wireless function Suction mouth diameter: at the base 120 mm - at the suspended guard 100 mm Overall dimensions of assembled machine mm 4200 x 4300 x 1800 h Overall dimensions for transport mm 4200 x 2350 x 1800 h + Pallet mm 1600 x 1000 x 800 h Weight kg 1140

Condition: as good as new (ex-display), Year of construction: 2026, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Njdpfeuzkxxsx Adpjcu Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Nedpfx Adexbyx Topocu Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Full load current: 32 amp Main fuse: 35 amp

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, working width: 1,200 mm, overall weight: 2,000 kg, table width: 1,200 mm, Veneer Splicing Machine Manufacturer: Fisher Rückle Model: Impetum 1200 Year of manufacture: 2019 For gluing and tightly splicing parallel-aligned veneer strips in a single operation with standard urea adhesives. Splicing Performance Continuously adjustable feed speed, practical reference value approximately 20 - 30 m/min. Technical Data: Veneer strip lengths (along the grain): 380 - 3800 mm Veneer strip widths (across the grain): 45 - 1200 mm Veneer strip thicknesses: 0.4 - 1.5 mm Feed speed: 5 - 40 m/min Throat depth: approx. 1,200 mm Njdpeymcu Njfx Adpjcu Touch panel with temperature, speed, and pressure displays. Data storage for machine settings for repeat orders. Robust and virtually wear-free stainless steel transport chains. 6 heating zones for various temperature settings. Integrated cooling unit for glue pot cooling.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x810(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us Nodpfsia Ta Uox Adpecu

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. Nedpev Hm Nmsfx Adpjcu The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 1996, Incl. 3-roller feed, control panel on top, table extensions, pull-out support, tilting from -5° to +45°. Location: supplier Nedpfoy Iddiex Adpecu

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points Ncjdpfewwtuiex Adpou - Direct extraction for continuous operation - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Advantages: - Wide selection of standard extraction systems with numerous customer-specific customization and options - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases - Small footprint due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 211 10 017, functionality: fully functional, operating hours: 1,415 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 450 mm, saw blade diameter: 550 mm, height adjustment type: mechanical, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 2,900 rpm, total length: 7,075 mm, total width: 1,350 mm, total height: 1,992 mm, overall weight: 2,700 kg, table height: 850 mm, year of last overhaul: 2026, cutting length (max.): 5,200 mm, compressed air connection: 6 bar, extraction nozzle diameter: 160 mm, hole diameter of the disc: 80 mm, table width: 950 mm, working height: 850 mm, Equipment: CE marking, documentation/manual, saw blade guard, The FLS technology with a floating unit represents a modern and versatile method for the longitudinal splitting and formatting of materials, placing a strong emphasis on production flexibility. This proven technology enhances yield, work productivity, and maintains the quality of wood material with particular attention to the cleanliness of the cut. FLS circular saws are characterized by a high level of safety and straightforward operation. Ncodpfx Aeubbubsdpju The saw offered above features premium equipment compared to the standard configuration. This includes, for example, clamps on the sliding back pusher, an automatic workpiece ripping mode, two joysticks, and more. Further details available upon request.