Decanter centrifuge

Hiller GmbH

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Bdsdpfxeppyhto Addsk Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Year of construction: 2002, condition: used, Plant: Used decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Decapress Machine No.: 2884 Year of construction: 2002 Maximum drum speed: 3800 I/min Inner diameter of bowl: approx. 450 mm Drum material: HII/St52 Electric motor: 30 kW Total mass: approx. 3650 kg Bdodpfxeppt Sfo Addek Purchase and rent possible.

Condition: used, Year of construction: 2009, operating hours: 20,536 h, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, empty load weight: 16,000 kg, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a Bdodpfx Adou Thypsdjk bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine is currently in our workshop undergoing partial refurbishment. We expect the refurbishment work on the machine to be completed by the end of October, after which the machine will be tested and released for sale.

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Bdodpou Av H Dofx Addjk

Condition: used, Year of construction: 2024, operating hours: 270 h, Internal vehicle number: FG00716 More INFO from Luis Lucena Technical data: Operating hours: 270 h Own weight: 5.8 t Transport length: 5.79 m Transport width: 1.95 m Transport height: 2.54 m Ditch bucket capacity: 0.25 m³ Track width: 400 mm Reach: 5.97 m Digging depth: 3.87 m Breakout force: 39 kN Ditch bucket width: 1.95 m Engine manufacturer: Caterpillar Engine model: C2.4 Turbo Engine power: 34.7 kW Displacement: 2.4 l Cylinder bore x stroke: 87 x 102.4 mm Financing example: * Internal number: Excavator * Purchase price: €49,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €781.55 * Residual value: €9,980.00 If you are interested in this offer or would like to tailor it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors excepted We are happy to accept your used vehicle in part exchange. Bdodpfxswyrhto Addjk Financing available directly through us onsite. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: ready for operation (used), 🔧 Key Features Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring. Bjdownx Ngepfx Addjdk

Condition: used, operating hours: 4,000 h, Used Line for olive oil production PIERALISI 700 kg/h Overview of the Line The Used Line for olive oil production PIERALISI 700 kg/h offers a complete and professional solution for the transformation of olives into extra virgin olive oil. Manufactured in 2014, this processing line includes exclusively PIERALISI machines, a benchmark brand in the olive oil sector. With a rated capacity of 700 kg/h, the system suits medium-sized producers who require durability, consistent performance, and high processing quality. Consequently, it provides an ideal balance between efficiency and compact footprint. Furthermore, it adapts well to various operational contexts. Machine Condition and Materials The seller has completely overhauled and repainted all machines in the line. As a result, the system is in excellent working condition. It includes full electrical and mechanical safety protections, which ensures compliance with modern standards. The manual control panel operates in perfect condition and comes with updated PDF wiring diagrams. In addition, all surfaces that come into contact with the product are made of AISI 304 stainless steel, which guarantees food-grade quality and long-term resistance to corrosion. Thus, the line ensures hygienic and durable operation. Initial Processing Phase The process begins with a receiving tank PIERALISI EFFE 3, where the olives enter the line. Immediately after, a feeding pump PIERALISI 2 Cv transfers the product from the tank to the crusher. This pump, which has a new stator, operates in like-new condition and is paired with a 140-liter stainless steel tank. Moreover, the pump design supports stable and continuous flow. It feeds the olives into the crusher PIERALISI EFFE 3, which features a twin-screw system with cycloidal gears. Therefore, it ensures efficient and uniform paste production. In this way, it prepares the raw material for malaxing. Malaxing and Pasta Handling After crushing, the olive paste proceeds to the malaxer PIERALISI with a 2-ton capacity. If required, the operator can divide the malaxer into two separate vessels, each with an independent outlet. This option allows more control over the feeding process to the decanter. Additionally, it improves flexibility in handling various olive batches. For this reason, the malaxing stage becomes highly adaptable. Meanwhile, it maintains optimal mixing conditions for oil extraction. As such, the line supports both continuous and batch workflows. Separation and Oil Extraction Bdjdpfxewqxhus Addsk The PIERALISI EFFE 3 decanter centrifuge forms the core of the Used Line for olive oil production PIERALISI 700 kg/h. This unit automatically separates the solid pomace from the liquid phase and supports a capacity of 700 kg/h. Importantly, it operates in both two-phase and three-phase modes, depending on the processing goals. Subsequently, the separator PIERALISI P1500/2000 (10 Hp) performs the final clarification step.

Condition: used, Year of construction: 2001, inner diameter: 450 mm, wall thickness: 11 mm, overall weight: 3,200 kg, System: Decanter / centrifuge, used Manufacturer: Hiller Model: DP45-422 Mach. No.: 2818 Year of manufacture: 2001 Maximum drum speed: 3800 l/min Bodpfx Adjvz A Uzjdjdk Drum inner diameter: approx. 450 mm Drum wall thickness: 11.0 Drum material: H2/ST52 Weight: approx. 3200 kg Permissible density 1.50 kg/dm3

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, AS-07251-Alfa Laval Clarifier Module 10 m3/h ALFA-LAVAL PURE SOX (SWPX 810 SGV-34CGL) Bdodpjw Ap I Ajfx Addjk CLARIFIER MODULE, 316SS. Minimum capacity: 10,000 L/H Offer of 4 identical units Max bowl speed: 7200 RPM, rated at 10,000 LPH, bowl volume 15 L, sludge capacity 9.4 L, liquid discharged under pressure, solids discharge pump with cyclone tank, 35 KW motor 460/3/60/1728 RPM, Pure SOx scrubber, unitized on a common skid with all valves, piping, control panel, tools, spares and manual Year of Manufacture: 2017

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Bedpfx Aev T I Eveddedk Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH