Work center

HOLZ-HER DYNESTIC 7507

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, CNC machining center HOLZ-HER DYNESTIC 7507 Year of production: 2017 Ledpfxex Haa Ds Aanoak Technical condition: very good Technical data: - 3-axis machine - Table dimensions: 4600 × 2200 mm - 8-position tool changer - Drilling head with 10 vertical and 6 horizontal drill bits - 3 vacuum pumps - Multi-zone table (Multizone) - Labelling unit - External reference stops

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ Laodpst Hagnefx Aanek * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: new, Year of construction: 2025, Showroom machine Year of manufacture: 2025 Features and technical specifications: - Base machine DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest freeform nesting software - Uninterruptible Power Supply - UPS (ZB27) - Touchtool tool length measurement - 10.3 kW router spindle - Drilling unit with 14 spindles - 1 additional machining field (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored side stops at the front, Field A + D, in X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, one-position aggregate magazine, pivotable in X and Y direction for Clamex aggregate - 2 x 140 m³/h and 1 x 250 m³/h dry-running vacuum pumps, 400 V - 16-circuit vacuum system (VF16) - software controlled, incl. additional 25 meters sealing cord - Laser pointer - red (one laser pointer) Field D (ZB8) for positioning of vacuum suction cups or tracing the workpiece contour - Automatic central lubrication - Vacuum suction cups for smooth table surfaces, complete, 140x115 mm, height 30 mm with connecting hose - Thin sheet ejector as an addition to the ejector for special materials below 4 mm material thickness and standard wood-based materials under 2 mm - Complete conveyor belt, pusher conveyor belt, pusher table - TouchLabel PRO - touchscreen and label printer mounted on stand - Production control computer NEXTEC 4.0 - Extraction funnel at the end of the pusher conveyor belt - Availability: by arrangement - Location: Flörsheim Lodpfx Ajxc Rmkeanoak

Condition: excellent (used), Year of construction: 2018, operating hours: 1,020 h, functionality: fully functional, For sale: Nesting machine from Holzher with very few operating hours and top equipment! Manufacturer: Holz-Her Model: Nextec 7707 Year of manufacture: 2018 Weight: 4980 kg Operating hours: 1020 Processing length X: 3100 mm Processing length Y: 2200 mm Vector speed: 110 m/min Equipment: Milling unit: 12 kW, air-cooled, 1000–24000 rpm Drilling unit (XL drilling head): 24 spindles (18 vertical, 6 horizontal) including saw unit in X-direction (grooving in X-direction) Angle gear: e.g. Lamello P-System Workpiece support: High-Flow nesting table with continuous vacuum area, 16-zone vacuum controlled by software Safety device: light barrier Workpiece clamping: 2 × 140 m³/h vacuum pumps, low-maintenance dry-running, additional 250 m³/h dry-running vacuum pump Tool changer: 10-position pick-up changer integrated in the machine frame, 1-position X/Y pick-up changer with tool cover NEXTEC module: CabinetSelect Lodpfxewtiq Se Aanoak DirectCut: line laser in X/Y-direction, incl. software Software: CAMPUS software machine license included, aCADemy CAD/CAM module and CabinetControl Base, “Warehouse” software module, Production software module, BetterNest free-form nesting

Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit Lsdsv Szt Dopfx Aanjak 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Morbidelli X 400 cnc machine with flat (nesting) table Lodpfxoxqzm Ds Aanoak

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection Lodpfxoxwuryj Aaneak - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: good (used), Code: 0247 Brand: SCM Model: L'INVINCIBILE SI 6000 - CE Standard Automatic panel saw with TOUCH SCREEN VANGUARD electronic control and tilting blade with scoring unit for precise cutting of panels, furniture, custom-made furnishings, kitchens, window frames, doors, plastics, composite materials, and various - CE Standard Sturdy structure to ensure maximum working precision Cast iron worktop with extension top Patented SCM sliding carriage in extruded aluminum with large section, rigid and with closed lattice structure for maximum resistance even with heavy loads Parallel guide with precision at 25 m/min Automatic adjustment of scoring unit Laodpfjxz Ekbox Aanok 2 digital displays on the square guide VANGUARD TOUCH SCREEN control - Manual, semi-automatic, and automatic modes - Operator assistance system - 12-inch color video and Touch Screen function Full Support frame tiltable from + 50° to - 50° for angled cuts with panels of any size Overhead control panel Start/stop buttons integrated into the carriage Technical data: Carriage length 3200 mm Extendable fence for square cuts up to 3200 mm Cutting width with parallel fence 1500 mm Blade diameter 400 mm F30 Scoring blade diameter 120 mm F20 Max cutting height at 90° 130 mm Max cutting height at 45° 92 mm Blade motor power 7,5 Hp Scoring blade motor power 0,75 hp Suction port diameter mm 120/100 Overall dimensions of assembled machine mm 3400 x 4300 x 1720 h Overall dimensions for transport mm 3400 x 2350 x 1720 h Weight kg 1380

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 22.198, input frequency: 50 Hz, Showroom model Fully CNC-controlled edge bander, very comprehensively equipped: Pre-milling unit Gluing unit Front and rear cut-off saw unit Fine milling unit (top and bottom) Laedpfjw Ufuhox Aanjk Corner rounding unit (front and rear) Radius scraper unit Additional options available: Infeed roller for 2 types of edge bands, including solid up to 5 mm. R-8 N glue scraper unit. PC 19” touch screen (new). CNC-controlled infeed guide. Pre-milling unit with 65 mm high diamond tools. Pneumatic on/off. Infrared lamp at infeed. Universal feed rule. Antistatic at infeed (type Riepe) Anti-adhesive unit after the milling unit (type Riepe) Cleaning unit at outfeed (type Riepe) LED in the cabin. WiFi Kit unit. LED motion system. Duo Melt EVA/PUR glue unit. Nesting for panels with hinge holes. Automatic chain lubrication.

Condition: repair required (used), Year of construction: 2005, functionality: limited functionality, machine/vehicle number: AB/174517, Unfortunately the display has stopped working and needs fixed or replaced. Price is set with the repair price in mind. Ledoxgvv Sspfx Aanoak