Edgebander

Holzher Streamer 1057 XL

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Equipment and technical data: Base machine Streamer 1057XL, 200-400 V / 50 Hz, with manual pressure beam adjustment Extendable XL workpiece support, spacing 600 mm Joint milling unit FG201 with 2 milling heads for jointing the panel edge Diamond cutter, diameter 70 x 64 x 30 mm, Z2 + 2, left-hand rotation, Air Stream System Diamond cutter, diameter 70 x 64 x 30 mm, Z2 + 2, right-hand rotation, Air Stream System Edge feed 1903, automatic transport of roll and strip material Gluing system Glu Jet GJ301 (2.3 kW, 50 Hz), automatic glue height adjustment (contact nozzle) Automatic reloading function Pressure unit 1912-3, pneumatic, first roller driven with pneumatic immersion control End trimming unit 1918 (60 mm), pneumatic, bevel trimming 0/10 degrees, pneumatic adjustment Extraction hoods for end trimming unit 1918 Multifunctional routing unit FR 201 for flush, radius as well as radius tracing, incl. DIA cutters Corner rounding unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), corner rounding function up to 3 mm edge thickness Diamond cutter, diameter 53 x 10 x 16 mm, Z = 3, R = 2 mm, with CM technology (Leuco system), with integrated chip extraction, for profile milling unit 1832 Scraper unit 1929 Chip container KPL, diameter 120 – 1929+1964+FK70 HW reversible knives for scraper holder R = 2.0 mm (2 pcs. required) Flat scraper FK 701 for removing glue residues for a clean joint Spraying device TR 201 for infeed and outfeed area Buffing unit 1940 (2 x 0.09 kW, 50/60 Hz, 1,400 rpm) for post-cleaning and edge polishing, with 2 textile discs, swivels 0 – 5° Minimum workpiece length (mm): 160 Workpiece thickness (mm): 6 – 45 (60) Edge thickness (mm): 0.4 – 3 (6) Gjdpfex Twh Ejx Ah Hjtt Feed speed (m/min): 10 Total length (mm): 4,630 Weight (kg): approx. 1,440 Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Godpfx Ahjxymd Te Hstt Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Fully automatic edge magazine for roll and strip material GLU-JET cartridge glue application station + PU gluing Adhesive application via nozzle technology Sensing nozzle Gedpfex Aqx Tjx Ah Hett Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness With pneumatic tilt adjustment from 0-10° for the trimming saws Milling unit: flush trimming 6 mm, radius trimming, bevel trimming - 15° Corner copying unit - 3 mm edge thickness Scraper unit for bevels and radii with 2 scraper holders Flat scraper unit - finish Buffing unit Spraying device in infeed and outfeed area as well as for PU Machine comes with all processing tools Machine is WORKSHOP TESTED Available ex stock Lieboch

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical specifications: - Base machine with manual pressure bridge adjustment Godpfxjx Rpf Rj Ah Hett - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Single edge feeder Automatic transport for coil and strip material - Glu Jet GJ 301 adhesive application system Automatic glue height adjustment (sensor nozzle) - Pressure unit 1912-3 pneumatic - End trimming unit 1918 (60 mm) pneumatic - Extraction hoods for end trimming unit - Multifunctional milling unit FR 201 - Corner rounding unit 1832 for edge thickness up to 3 mm - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4–6 mm Feed speed: 10 m/min Total length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Availability: short-term Storage location: Flörsheim

Condition: new, Year of construction: 2022, functionality: fully functional, Edgebanding machine Hebrock F5 equipped with a PLC control system. It features a maintenance-free, coated rapid-heating glue pot, with pre-set configuration for quick pot changeovers. - 10” touchscreen display - Maximum edge thickness: 3 mm - Minimum workpiece length: 160 mm - Feed speed: 7 m/min - Ready for operation in approx. 3.5 min - Maximum power consumption: 7.4 kW - Electrical connection: 400V / 3-phase / 50Hz - Table height: 900 mm - Machine dimensions: 4300 x 1300 x 1400 mm - Approximate weight: 900 kg Options/Extras: • Whispercut pre-milling unit, workpiece height up to 50 mm • Combi cutter head • Corner rounding radius: R = 2 mm • Radius corner rounding: R = 2 mm • Quick change system for corner rounding motor • Multi-radius scraper R2/R1 • Release agent spraying unit • Cleaning agent spraying unit Gedpowyu Rwjfx Ah Hstt • Edge protection spraying unit • Nesting function for milling unit and radius profile scraper • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Integrated LED workspace lighting

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence Gedpjw I U Rfjfx Ah Hjtt 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2023, Demo machine Year of manufacture: 2023 Equipment and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Long infeed fence 1252 mm Jointing milling unit with 2 motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edgebanding unit 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3 pneumatic Gsdpfx Ahjw I Uyte Hott Spray unit GM 201 after pressure unit End trimming unit 1918 pneumatic Extraction hoods for end trimming unit Combination milling unit FR201 with DIA cutters R=2 mm Profile trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray unit front and rear TR201 Buffing unit 1940 Location: Solingen Availability: short notice

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last service by Homag in 11/2024) Features and technical data: - Workpiece thickness min.: 12 mm - Workpiece thickness max.: 60 mm - Workpiece min. (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) - Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) - Feed speed: steplessly adjustable 18–25 m/min (frequency-controlled) - Gluing system: EVA hot-melt adhesive - Glue application (tank / cartridge / nozzle): Melting unit with granulate hopper - Glue volume / cartridge size: Granulate hopper, melting capacity 18–35 kg/h, level-controlled - Heating time: approx. 8–10 min - Edge magazine (positions): 2 coils (automatic coil change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure section: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment Gtodpfx Aswx Aaqeh Hst - End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: FK13 profile milling unit, automatic 8-position tool changer (R = 2 mm) - Bevel / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in FA11 finishing unit - Jointing unit: KAL310/A20/S2 jointing milling unit, 2 × 3 kW - Workpiece pre-heating: available - Release agent spray device: top / bottom, type 2929 (F.01) - Extraction nozzles: multiple Ø 100 mm (individual extraction per unit) - Control system: power control PC22 (industrial PC, woodCommander running Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant per EU directive 98/37/EC Dimensions / required floor space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg Please note: The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania

Condition: new, Year of construction: 2024, functionality: fully functional, feed rate X-axis: 9 m/min, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, warranty duration: 12 months, HOLZ-HER Edgebander ARTEA 1020 Stock machine – Subject to prior sale Year of manufacture: 2024 Godpfxjxpgv Uj Ah Hstt - Base machine 1020 - Edge Control BC15 with Vi.Se. (Visual Setting) - LED machine lighting - Jointing milling unit - GluJet for PUR / EVA including adhesive reservoir - Milling - Profile scraper - Surface scraper - Buffing unit

Condition: used, Compact edgebanding machine Hebrock EURO 3001 for precise edging of panel material with edge bands. The machine enables clean edge processing through automatic glue application, pressing rollers and post-processing aggregates. Ideal for furniture and interior construction. Technical data subject to change. Unit 1: Glue application Godpfjxdc D Rjx Ah Hett Unit 2: caps Unit 3: Flush milling workpiece height: approx. 10 – 40 mm edge thickness: max. approx. 12 mm feed rate: approx. 10 m/min