2009 HOLZPROFI BULDOG 5

HOLZPROFI BULDOG 5

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Tedpfewqdbmex Abtsb Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: Tjdpsw Naanefx Abtob The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: used, Year of construction: 2003, SCM SANDYA 20 model 20 M3 135 calibrating and sanding machine, used Year of manufacture: 2003 Serial number: AE/024903 Maximum working width: 1350 mm Feed speed: 3.5-18 m/min with inverter Working height: 4-170 mm Vacuum bed: 7.5 KW Configuration: 1st group: grooved steel calibration roller D. 250 – motor 22 KW 2nd group: sanding roller D. 250, hardness 45 SH – two-speed motor 9/11 KW, 1400/2800 rpm 3rd group: combined roller D. 170, hardness 30 SH + segmented elastic pad (46 segments) – motor 11 KW with inverter 4th group: scotch brite finishing roller Bed positioner with workpiece Belt size: 2620 x 1370 mm Tjdpfx Asxwbydsbtjb Blowers for 2nd and 3rd belt Automatic belt centering Electronic control of 1st / 2nd / 3rd roller / pad

Condition: excellent (used), Working width: 1,360 mm Todpfx Aboych Igetjb Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 2001, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Weight with control cabinet: 2220 kg - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No Todpfx Abextakmetsb - Location: at the Blomberg warehouse

Condition: used, Year of construction: 2004, machine/vehicle number: SA/005006, SECOND HAND WIDE BELT SANDER WITH 3 BELTS DMC MOD. UNISAND USK 1350 M3 - Steel roller - Rubber roller - Rubber roller - N. 3 indipendent motors - Working width 1350 mm - Device for short pieces - Touch screen control Tedpfjwrnmpex Abtob - S/N SA/005006 - Year 2004 - CE rules

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Configuration: 11 KW steel cylinder Tedpfx Abextxhkstjb 11 KW hard rubber cylinder soft rubber cylinder Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: used, Used Italpresse UT/6 hot press for surface finishing by applying veneers to chipboard, plywood, MDF, solid wood, or plastic laminates, also suitable for aluminum and other metals. The press platens are solid plates made of perforated steel. Platen dimensions: 3000 x 1300 mm. Maximum opening: 400 mm. Platen heating is achieved with heat transfer oil and an electric boiler, complete with a circulation pump. Boiler: 27 kW - 380 V. Selector switch for using 50% of the boiler's power (13.5 kW in 1st position) or 27 kW in 2nd position. Pressing time can be set with automatic opening. Maximum pressure: 300 bar. Option to exclude 2 lateral cylinders from the control panel. Tedpfx Abjzkt Tisteb Protective Mylar film on the platens. Machine dimensions: 3700 x 1700 x H. 2100 mm. Weight: 6600 kg. Machine complies with CE standards.

Condition: excellent (used), functionality: fully functional, CALIBRATING SANDING machine with 3 belts model DMC TECHNOSAND TC 1350 RRP second hand machine CE standard : YES machine with vacuum unit for table universal machine for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data: max. working width mm.1350 max. working height mm.150 min. working height mm.3 dimensions of abrasive belts mm.1380 x 2620 automatic centering Tjdsyrrr Uepfx Abtsb composition machine ( 3 units , 3 independent motors ) : 1st unit : rubber roller diameter mm.240 - shore 85 . motor power Kw 18,5 automatic blowers for cleaning abrasive belts 2nd unit : rubber roller diameter mm.240 - shore 45 . motor 2 speeds power Kw 12 / 15 automatic blowers for cleaning abrasive belts 3rd unit : electronic segmented pad n.34 sectors . motor 2 speeds power Kw 8,8 / 11 automatic blowers for cleaning abrasive belts brake with automatic intervention input roller conveyor output roller conveyor weight kg 3850 volt. 380/50

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. Todox Rdn Tjpfx Abtsb The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.