Homag Kal 310/7/A20/S2

Homag Kal 310/7/A20/S2

Condition: used, machine/vehicle number: 004592, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Ndsdpfx Agowcmxljfed Corner Rounding Unit: yes Max feed speed: 24 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Ndjdpfsflc Uhjx Agfed Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: good (used), Year of construction: 2008, functionality: fully functional, edge thickness (max.): 20 mm, product height (max.): 60 mm, product width (max.): 55 mm, TECHNICAL DETAILS Type of edge applied: thin edge thick edge solid wood Gluing system: EVA Joining milling: yes Multifunctional unit: yes Number of working units: 8 Panel thickness: 12 - 60 mm Panel width: min. 55 mm Edge thickness: 0.3 - 20 mm Speed of advance: 24 m/min Pressure: rubberized belt Panel guide Panel support guide: yes Ndedev Eakhspfx Agfod With NC positioning: yes Assembled units in the part of the format cut Unit: corrections Automatic intervention after time: yes Additional systems Lamps for heating the edge: yes Magazine for the coil: yes Number of positions: 2 Glue pot for hot glue: yes Prefusor for hot glue: HOT MELT A34 Press roller conveyor edge: yes Assembled Aggregates in the edge processing section Number of aggregates: 6 Aggregate 1: Head processing Model manufacturer: HL 81 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Aggregate 2: Router Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Aggregate 3: Multifunctional aggregate Model manufacturer: FK 13 Number of motors: 2 Automatic tool change: yes With NC positioning: yes Processing speed: 20 m/min Motor power: 0.4 kW Speed: 12,000 rpm Aggregate 4: Edge scraper Model manufacturer: MN 21 With NC positioning: yes Aggregate 5: Glue scraper Aggregate 6: Brushing aggregate Number of motors: 2 Motor power: 0.18 kW Speed: 14,000 rpm Additional systems Spray unit: RIEPE LP 163/93 Control system: PC 22 CE marking: yes

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Ndodpfsvvkfwox Agfjd Storage location: Nattheim

Condition: new, The Mark Super S, part of the Conventional Vertical Milling Machines category, excels as a mill drill with robust capabilities. This versatile machine is perfect for a wide array of applications, including drilling and milling of steel and non-ferrous metals. With its motorized cutter head movement and hand-wheel for precise positioning, the Mark Super S ensures that you can achieve accurate results every time. It features an infinitely variable feed on the X-axis, coupled with an automated drilling feed and a clear digital depth display for ease of use. The swiveling head allows for extensive maneuverability, while the gearbox milling head delivers powerful machining capabilities. Enhanced productivity is assured with dual gear steps for high torque, a 3-axis position indicator, and an intuitive operator interface. Even after 15 years of popularity, the Mark Super S remains a top choice for workshops and educational settings. Request a quote today to explore the advantages this mill drill can bring to your operations. Nsdpfx Aoqcuc Tsgfjdd

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Nodpevqbh Ejfx Agfedd

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 6175 mm Measurements height 300 mm Main Drive Spindle speed range 24000 rpm Spindle motor power 15 kW Nedjv Rhqmopfx Agfodd Number of axis 3 Movement X-Axis Movement 6175 mm Y-Axis Movement 1900 mm Z-Axis Movement 300 mm Tools Number of station 30 Type of tool holder HSK F63 Media Chip conveyor Yes Additional Equipment Safety devices: Laser, bumper Torque support: Yes Grooving saw: 90° pivoting Vertical drilling spindles: 17 Horizontal X drilling spindles: 2 Horizontal Y drilling spindles: 2 Liquid-cooled milling spindle: Yes Closed drag chain: Yes Handheld terminal: Yes HOMAG SaveScan: Yes This 3-axis HOMAG WEEKE Profi BMG 611/60/15/F/AP was manufactured in 2012. A CNC Wood Machining Centre designed for precision and efficiency in woodworking applications. Consider the opportunity to buy this HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC Wood Machining Centre. Contact us for further details regarding this machine. Application Types CNC Wood Machining

Condition: used, Year of construction: 2010, functionality: fully functional, Complete Automatic System Beam Saw Giben Prisma 3000 , Cutting 3800 + Systraplan , Professional Stacking and destacking System , Njdpfev H Ufvsx Agfsdd Complete line , 24m * 10 m , 2 places for loadin palets by forklift , Capacity about 20-25 palet places , * 5 palets in one place, about 100 pallets , Speed 120m/min longitudinal , 80 m/min * short side , Load capacity of the vacuum system 500 kg , More pictures and videos avilable ,

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Ndjdpowcyd Ijfx Agfsd Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Njdpfxeqvnl Tj Agfodd