Hydr. notching machine

INDUMASCH 254

Condition: used, plate thickness 4,0 mm ST plate thickness 3,0 mm VA table-size 800 x 800 mm blade length 250 x 250 mm strokes per minute ca. 55 min engine output 4 kW Ijdpfovg R Rhex Ab Ija weight of the machine ca. 800 kg dimensions of the machine ca. 1300 x 1300 x 1300 mm Features: - Electro-hydraulic notching machine - 2x locking precision stops, with stop bars - Single/continuous stroke selectable - Front finger guard - Freely movable foot switch

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Technical Specifications: Isdpfjwi Twhex Ab Ija • Programmable control cutter, • Automatic straightener, • Sectional roller shear, • Labeling system, • Outfeed conveyor, • Control panel, • Usable sheet width: 1270 mm, • Straightening rollers: 6 units, • Number of blades: 5 pairs, • Blade type: stainless steel.

Condition: used, Max. sheet thickness: 4 mm steel, 3 mm stainless steel Blade length: 250 mm Strokes per minute: 52 Weight: approx. 900 kg knife sharpened Depth stop Iedpfxou Hy N Dj Ab Ioa

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254629, Offer 25311 Iodpfx Asxqzirsb Iea Technical Data: - Cutting length: 250 mm - Cutting angle: 90° - Cutting capacity: - Mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate: up to approx. 55 / min - Table size: W 800 x D 800 mm - Working height: approx. 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil filling: 50 l - Electric foot pedal - Required space: approx. W 1300 x H 1250 x D 1300 mm - Weight: approx. 800 kg - Mobile base frame

Condition: excellent (used), Year of construction: 2001, Technical data: Year of manufacture: 2001, service in 2024 Working length: 3100 mm Iodpfx Asvy H Iiob Isa Stand width: 2650 mm Pressing force: 300 tons CNC control: Robosoft BC55 touch graphics 2D Controlled axes: Y1 / Y2; X CNC table bending compensation Projection: 300 mm Stroke: 350 mm Motor power: 18 kW Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254326, Offer 22407 Technical data: - Cutting length 250 mm - cutting angle 90 ° - Cutting thickness - mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminum up to 5 mm Ijdpfeif Aqvsx Ab Ioa - stroke rate up to approx. 55 /min - table size W 800 x D 800 mm - working height approx. 940 mm - fences steplessly adjustable in length and degrees - drive 400 V / 4 kW - oil filling 50 l - E - foot switch - space requirement approx. W 800 x H 1250 x D 900 mm - weight approx. 700 kg

Year of construction: 1990, condition: good (used), machine/vehicle number: V 254xxx, Lg. no. 22462 Technical data: - Cutting length 250 mm - cutting angle 90 ° - Cutting thickness - mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminum up to 5 mm - stroke rate up to approx. 55 /min - table size W 800 x D 800 mm Ijdpfoiluqmox Ab Ioa - working height approx. 940 mm - stops steplessly adjustable in length and degrees - drive 400 V / 4 kW - oil filling 50 l - E - foot switch - space requirement approx. W 800 x H 1250 x D 900 mm - weight approx. 700 kg

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t Isdpfx Absfg E Hpe Iea dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 4806067, Offer 25059 Isdov Dux Depfx Ab Ija Technical data: - Pipe bending capacity at 45 kg / mm² up to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - Bending angle preselection - Digital bending angle display + bending angle fine adjustment - Bending tools, Ø ½“ R 67 mm, Ø 1“ R 67 mm,

Condition: new, Year of construction: 2025, working width: 1,250 mm, bending angle (max.): 160 °, sheet thickness steel (max.): 1 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness copper (max.): 12 mm, overall weight: 100 kg, total length: 1,500 mm, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Triple segmented bender SGR-1250/1.0mm Technical specifications: - maximum working width; 1250mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 105kg Iedpfx Ascgmf Reb Isa - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 55mm Total length: 1.6m Height: 45cm Price: 2,950 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.